Thermodynamic Stacking Fault Energy, Chemical Composition, and Microstructure Relationship in High-Manganese Steels
Source abstract
Abstract
Stacking fault energy (SFE) is related to activating complex high strength and ductility mechanisms such as transformation-induced plasticity and twinning-induced plasticity effects. This type of energy can be estimated by many different methods and its importance is in its ability to predict microstructure and phase transformation behavior when the material is submitted to stress/strain. In order to study the SFE, chemical composition, and microstructure relationships, eleven different welding parameters were chosen to obtain a large range of dilution levels. A new tubular wire electrode of high-manganese steel (21 wt pct Mn) was used as the consumable and an SAE 1012 steel plate (0.6 wt pct Mn) as the base metal in a flux-cored arc welding process. These welding parameters were related to the phases formed and phase transformation behavior in the fusion zone. The SFE of the austenite phase was calculated using a thermodynamic model. The welding parameters produced SFE values in the range of − 5 to 7 mJ/m2. $$\epsilon $$ -martensite and austenite were observed in all samples, but $$\alpha $$ ′-martensite was only found in those that presented negative SFE values, i.e., those with lower Mn content. Chemical Gibbs Free energy was the component with the most influence on the SFE. Nanoindentation detected the phase transformations during hardness testing for the medium and low dilution levels used, while the high dilution levels presented the highest hardness and modulus of elasticity values, and the lowest elastic and plastic deformation values. The results provide an improved method to develop high-manganese steels with microstructure control through welding parameters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. W. Yan, L. Fang, K. Sun, Y. Xu, Effect of surface work hardening on wear behavior of Hadfield steel, Mater. Sci. Eng. A 460–461, 542 (2007). https://doi.org/10.1016/j.msea.2007.02.094.10.1016/j.msea.2007.02.094 ↗
2. B.D. Shanina, V.G. Gavriljuk, H. Berns, F. Schmalt, Concept of a new high-strength austenitic stainless steel, Steel Res. 73(3), 105 (2002). https://doi.org/10.1002/srin.200200181.10.1002/srin.200200181 ↗
3. T.H. Lee, C.S. Oh, S.J. Kim, Effects of nitrogen on deformation-induced martensitic transformation in metastable austenitic Fe-18Cr-10Mn-N steels, Scripta Materialia 58(2), 110 (2008). https://doi.org/10.1016/j.scriptamat.2007.09.029.10.1016/j.scriptamat.2007.09.029 ↗
4. S. Lee, J. Kim, S.J. Lee, B.C. De Cooman, , Scripta Materialia 65(12), 1073 (2011). https://doi.org/10.1016/j.scriptamat.2011.09.019.10.1016/j.scriptamat.2011.09.019 ↗
5. O. Bouaziz, S. Allain, C. Scott, , Scripta Materialia 58(6), 484 (2008). https://doi.org/10.1016/j.scriptamat.2007.10.050.10.1016/j.scriptamat.2007.10.050 ↗
6. B. De Cooman: in Automotive Steels (Elsevier, 2017), pp. 317–85. https://doi.org/10.1016/B978-0-08-100638-2.00011-010.1016/B978-0-08-100638-2.00011-0 ↗
7. S. Curtze, V.T. Kuokkala, , Acta Materialia 58(15), 5129 (2010). https://doi.org/10.1016/j.actamat.2010.05.049.10.1016/j.actamat.2010.05.049 ↗
8. B.C. De Cooman, O. Kwon, K.G. Chin, , Mater. Sci. Technol. 28(5), 513 (2012). https://doi.org/10.1179/1743284711Y.0000000095.10.1179/1743284711Y.0000000095 ↗
9. O. Bouaziz, S. Allain, C. Scott, P. Cugy, D. Barbier, , Curr. Opin. Solid State Mater. Sci. 15(4), 141 (2011). https://doi.org/10.1016/j.cossms.2011.04.002.10.1016/j.cossms.2011.04.002 ↗
10. M. Toloui, M. Militzer, , Acta Materialia 144, 786 (2018). https://doi.org/10.1016/j.actamat.2017.11.047.10.1016/j.actamat.2017.11.047 ↗
11. C. Liu, Q. Peng, Z. Xue, S. Wang, C. Yang, , Materials 11(11), 2242 (2018). https://doi.org/10.3390/ma11112242.10.3390/ma11112242 ↗
12. Z.L. Li, D. Chen, J. Kang, G. Yuan, G.D. Wang, . Steel research international 89(5), 1700484 (2018). 10.1002/srin.20170048410.1002/srin.201700484 ↗
13. R. Xiong, H. Peng, H. Si, W. Zhang, Y. Wen, , Materials Science and Engineering: A 598, 376 (2014). https://doi.org/10.1016/j.msea.2014.01.046.10.1016/j.msea.2014.01.046 ↗
14. S. Curtze, V.T. Kuokkala, A. Oikari, J. Talonen, H. Hänninen, , Acta Materialia 59(3), 1068 (2011). https://doi.org/10.1016/j.actamat.2010.10.037.10.1016/j.actamat.2010.10.037 ↗
15. H.M. Otte, , Acta Metallurgica 5(11), 614 (1957). https://doi.org/10.1016/0001-6160(57)90108-6.10.1016/0001-6160(57)90108-6 ↗
16. R.E. Smallman, K.H. Westmacott, , Philosophical Magazine 2(17), 669 (1957). https://doi.org/10.1080/14786435708242709.10.1080/14786435708242709 ↗
17. P.J. Ferreira, P. Müllner, , Acta Mater. 46(13), 4479 (1998). https://doi.org/10.1016/S1359-6454(98)00155-4.10.1016/S1359-6454(98)00155-4 ↗
18. J.N. Israelachvili, D. Tabor, , Proceedings of the Royal Society of London 249(1256), 114 (1959). 10.1098/rspa.1959.001110.1098/rspa.1959.0011 ↗
19. S. Zhao, G.M. Stocks, Y. Zhang, Stacking fault energies of face-centered cubic concentrated solid solution alloys, Acta Mater. 134, 334 (2017). DOI: https://doi.org/10.1016/j.actamat.2017.05.001.10.1016/j.actamat.2017.05.001 ↗
20. R. Xie, W. Li, S. Lu, Y. Song, L. Vitos,. J. Phys. 31(6), 065703 (2019). https://doi.org/10.1088/1361-648X/aaf2fa10.1088/1361-648X/aaf2fa ↗
21. S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, N. Guelton, Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys, Materials Science and Engineering A 387-389(1), 158 (2004). 10.1016/j.msea.2004.01.05910.1016/j.msea.2004.01.059 ↗
22. L. Remy, A. Pineau, Twinning and strain-induced, Materials Science and Engineering 28(1), 99 (1977). 10.1016/0025-5416(77)90093-310.1016/0025-5416(77)90093-3 ↗
23. T.H. Lee, E. Shin, C.S. Oh, H.Y. Ha, S.J. Kim, Correlation between stacking fault energy and deformation microstructure in high-interstitial-alloyed austenitic steels, Acta Mater. 58(8), 3173 (2010). DOI: https://doi.org/10.1016/j.actamat.2010.01.056.10.1016/j.actamat.2010.01.056 ↗
24. T. Maki, Microstructure and Mechanical Behaviour of Ferrous Martensite, Materials Science Forum 56–58, 157 (1991). DOI: https://doi.org/10.4028/www.scientific.net/MSF.56-58.157.10.4028/www.scientific.net/MSF.56-58.157 ↗
25. J.K. Hwang, Deformation behaviors of various Fe-Mn-C twinning-induced plasticity steels: effect of stacking fault energy and chemical composition, Journal of Materials Science 55(4), 1779 (2020). DOI: https://doi.org/10.1007/s10853-019-04018-1.10.1007/s10853-019-04018-1 ↗
26. D. Pierce, J. Jiménez, J. Bentley, D. Raabe, J. Wittig, The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe-Mn-Al-Si steels during tensile deformation, Acta Mater. 100, 178 (2015). DOI: https://doi.org/10.1016/j.actamat.2015.08.030.10.1016/j.actamat.2015.08.030 ↗
27. G.B. Olson, M. Cohen, A general mechanism of martensitic nucleation: Part I General concepts and the FCC $$\rightarrow $$ HCP transformation, Metall. Trans. A 7(12), 1897 (1976). 10.1007/BF0265982210.1007/BF02659822 ↗
28. K. Ishida, Direct estimation of stacking fault energy by thermodynamic analysis, Physica Status Solidi (a) 36(2), 717 (1976). DOI: https://doi.org/10.1002/pssa.2210360233.10.1002/pssa.2210360233 ↗
29. A.T. Dinsdale, SGTE data for pure elements, Calphad 15(4), 317 (1991). DOI: https://doi.org/10.1016/0364-5916(91)90030-N.10.1016/0364-5916(91)90030-N ↗
30. O. Redlich, A.T. Kister, Algebraic Representation of Thermodynamic Properties and the Classification of Solutions, Industrial & Engineering Chemistry 40(2), 345 (1948). DOI: https://doi.org/10.1021/ie50458a036.10.1021/ie50458a036 ↗
31. S. Cotes, M. Sade, A.F. Guillermet, Fcc/Hcp martensitic transformation in the Fe-Mn system: Experimental study and thermodynamic analysis of phase stability, Metall. Mater. Trans. A 26A(8), 1957 (1995). DOI: https://doi.org/10.1007/BF02670667.10.1007/BF02670667 ↗
32. A. Dumay, J.P. Chateau, S. Allain, S. Migot, O. Bouaziz, Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel, Materials Science and Engineering A 483-484(1), 184 (2008). 10.1016/j.msea.2006.12.17010.1016/j.msea.2006.12.170 ↗
33. K. Ishida, T. Nishizawa, Effect of Alloying Elements on Stability of Epsilon Iron. Trans Jap Inst Met 15(3), 225–231 (1974). https://doi.org/10.2320/matertrans1960.15.22510.2320/matertrans1960.15.225 ↗
34. W.S. Yang, C.M. Wan, The influence of aluminium content to the stacking fault energy in Fe-Mn-Al-C alloy system, Journal of Materials Science 25(3), 1821 (1990). DOI: https://doi.org/10.1007/BF01045392.10.1007/BF01045392 ↗
35. S. Chen, C.Y. Chung, C. Yan, T.Y. Hsu, Effect of fcc antiferromagnetism on martensitic transformation in Fe-Mn-Si based alloys, Materials Science and Engineering A 264(1-2), 262 (1999). 10.1016/s0921-5093(98)01105-810.1016/s0921-5093(98)01105-8 ↗
36. P.H. Adler, G.B. Olson, W.S. Owen, Strain Hardening of Hadfield Manganese Steel, Metallurgical and Materials Transactions A 17A(10), 1725 (1986). DOI: https://doi.org/10.1007/BF02817271.10.1007/BF02817271 ↗
37. I.A. Yakubtsov, A. Ariapour, D.D. Perovic, Effect of nitrogen on stacking fault energy of fcc iron-based alloys, Acta Mater. 47(4), 1271 (1999). 10.1016/S1359-6454(98)00419-410.1016/S1359-6454(98)00419-4 ↗
38. . , The role of magnetism in the calculation of phase diagrams, Physica B+C 103(1), 82 (1981). 10.1016/0378-4363(81)91004-410.1016/0378-4363(81)91004-4 ↗
39. X. Wu, T.Y. Hsu, Effect of the Neel temperature, TN, on martensitic transformation in Fe-Mn-Si-based shape memory alloys, Materials Characterization 45(2), 137 (2000). DOI: https://doi.org/10.1016/S1044-5803(00)00066-8.10.1016/S1044-5803(00)00066-8 ↗
40. Y.S. Zhang, X. Lu, X. Tian, Z. Qin, Compositional dependence of the Néel transition, structural stability, magnetic properties and electrical resistivity in Fe-Mn-Al-Cr-Si alloys, Materials Science and Engineering A 334(1–2), 19 (2002). DOI: https://doi.org/10.1016/S0921-5093(01)01781-6.10.1016/S0921-5093(01)01781-6 ↗
41. J.N. DuPont, A.R. Marder, Dilution in single pass arc welds, Metall. Mater. Trans. B 27B(3), 481 (1996). DOI: https://doi.org/10.1007/BF02914913.10.1007/BF02914913 ↗
42. J.N. Dupont: in Welding Fundamentals and Processes, vol. 6A (ASM International, 2018), pp. 115–121. https://doi.org/10.31399/asm.hb.v06a.a000558910.31399/asm.hb.v06a.a0005589 ↗
43. G.M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research 7(6), 1564 (1992). DOI: https://doi.org/10.1557/JMR.1992.1564.10.1557/JMR.1992.1564 ↗
44. R. Elliott, K. Coley, S. Mostaghel, M. Barati, Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 2: Reduction Studies, Jom 70(5), 680 (2018). DOI: https://doi.org/10.1007/s11837-018-2773-8.10.1007/s11837-018-2773-8 ↗
45. B. Hu, H. Luo, F. Yang, H. Dong, Recent progress in medium-Mn steels made with new designing strategies, a review, Journal of Materials Science and Technol. 33(12), 1457 (2017). DOI: https://doi.org/10.1016/j.jmst.2017.06.017.10.1016/j.jmst.2017.06.017 ↗
46. X. Qiao, L. Han, W. Zhang, J. Gu, Nano-indentation investigation on the mechanical stability of individual austenite in high-carbon steel, Materials Characterization 110, 86 (2015). DOI: https://doi.org/10.1016/j.matchar.2015.10.024.10.1016/j.matchar.2015.10.024 ↗
47. S. Sadeghpour, A. Kermanpur, A. Najafizadeh, Investigation of the effect of grain size on the strain-induced martensitic transformation in a high-Mn stainless steel using nanoindentation, Materials Science and Engineering A 612, 214 (2014). DOI: https://doi.org/10.1016/j.msea.2014.06.055.10.1016/j.msea.2014.06.055 ↗
48. Y. Kim, T.H. Ahn, D.W. Suh, H.N. Han, Variant selection during mechanically induced martensitic transformation of metastable austenite by nanoindentation, Scripta Mater. 104, 13 (2015). DOI: https://doi.org/10.1016/j.scriptamat.2015.03.014.10.1016/j.scriptamat.2015.03.014 ↗
49. T.H. Ahn, S.B. Lee, K.T. Park, K.H. Oh, H.N. Han, Strain-induced $$\epsilon $$-martensite transformation during nanoindentation of high-nitrogen steel, Materials Science and Engineering A 598, 56 (2014). DOI: https://doi.org/10.1016/j.msea.2014.01.030.10.1016/j.msea.2014.01.030 ↗
50. T.H. Ahn, C.S. Oh, D.H. Kim, K.H. Oh, H. Bei, E.P. George, H.N. Han, Investigation of strain-induced martensitic transformation in metastable austenite using nanoindentation, Scripta Mater. 63(5), 540 (2010). DOI: https://doi.org/10.1016/j.scriptamat.2010.05.024.10.1016/j.scriptamat.2010.05.024 ↗
51. B.C. De Cooman, Y. Estrin, S.K. Kim, Twinning-induced plasticity (TWIP) steels, Acta Mater. 142, 283 (2018). DOI: https://doi.org/10.1016/j.actamat.2017.06.046.10.1016/j.actamat.2017.06.046 ↗
52. C. Haase, C. Zehnder, T. Ingendahl, A. Bikar, F. Tang, B. Hallstedt, W. Hu, W. Bleck, D.A. Molodov, On the deformation behavior of $$\kappa $$-carbide-free and $$\kappa $$-carbide-containing high-Mn light-weight steel, Acta Mater. 122, 332 (2017). DOI: https://doi.org/10.1016/j.actamat.2016.10.006.10.1016/j.actamat.2016.10.006 ↗
53. B. De Cooman: in Phase Transformations in Steels, vol. 2 (Elsevier, 2012), pp. 295–331. https://doi.org/10.1533/9780857096111.2.29510.1533/9780857096111.2.295 ↗
54. D. Hull, D.J. Bacon: Introduction to Dislocations (Elsevier, 2011). https://doi.org/10.1016/C2009-0-64358-010.1016/C2009-0-64358-0 ↗
55. R. Xiong, H. Peng, S. Wang, H. Si, Y. Wen, Effect of stacking fault energy on work hardening behaviors in Fe-Mn-Si-C high manganese steels by varying silicon and carbon contents, Materials & Design 85, 707 (2015). DOI: https://doi.org/10.1016/j.matdes.2015.07.072.10.1016/j.matdes.2015.07.072 ↗
56. Q. Xie, Z. Pei, J. Liang, D. Yu, Z. Zhao, P. Yang, R. Li, M. Eisenbach, K. An, Transition from the twinning induced plasticity to the $$\gamma $$-$$\epsilon $$ transformation induced plasticity in a high manganese steel, Acta Mater. 161, 273 (2018). DOI: https://doi.org/10.1016/j.actamat.2018.09.020.10.1016/j.actamat.2018.09.020 ↗
57. B. Sun, D. Palanisamy, D. Ponge, B. Gault, F. Fazeli, C. Scott, S. Yue, D. Raabe, Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite, Acta Mater. 164, 683 (2019). DOI: https://doi.org/10.1016/j.actamat.2018.11.029.10.1016/j.actamat.2018.11.029 ↗