journal article·2020-03

An Investigation of the Deep Drawing Behavior of Automotive Aluminum Alloys at Very Low Temperatures

R. Schneider, R. J. Grant, J. M. Schlosser, W. Rimkus, K. Radlmayr, F. Grabner, Ch. Maier

Publisher page

Abstract

Sheet metal aluminum alloys in the 5000 and 6000 series show increased formability if deformed at sub-zero temperatures which is beneficial for processing industries using sheet metals where evermore highly complex-shaped components are produced. In order to evaluate a cryogenic forming process, the temperature-dependent forming limits of the selected materials need to be known. For this determination, a device has been developed which allows deep drawing operations with circular specimens at cryogenic temperatures. The limiting drawing ratio (LDR) of the commercial aluminum alloys EN AW-5182 and EN AW-6016 are investigated in a temperature range from 298 K to 77 K. It is shown that the deep drawing behavior of both materials is generally enhanced at very low temperatures, although the LDR of the EN AW-6016 alloy increases only at temperatures T ≤ 77 K. Furthermore, using mathematical formulations and numerical (finite element) simulations the influence of friction on the punch forces could be predicted. The calculated results and experimental data are compared, and then subsequently discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. M. White: Projekt C-X75-Hybrid Sportwagen mit innovativer Karosseriestruktur. Karosserietage Bad Nauheim. www.automotive-circle.com, 2013. Accessed 13 October 2013
2. Miller, W. S., Zhuang, L., Bottema, J., Wittebrood, A. J., De Smet, P., Haszler, A., Vieregge, A.: Mater. Sci. Eng. A, 2000, vol. 280, pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
3. Schlosser, J., Schneider, R., Rimkus, W., Kelsch, R., Gerstner, F., Harrison, D. K., Grant, R. J.: J. Phys. Conf. Ser, 2017, vol. 896, art. no. 012091, https://doi.org/10.1088/1742-6596/896/1/01209110.1088/1742-6596/896/1/012091 ↗
4. Anyasodor, G., Koroschetz Ch.: Mater. Sci. Eng. Conf. Ser., 2018, vol. 418, art. no. 012023, https://doi.org/10.1088/1757-899X/418/1/01202310.1088/1757-899X/418/1/012023 ↗
5. Smeyers, A., Schepers, B., Braunschweig, W., Bürger, A., Vieregge, K., Khosla, S., Wise, A.: Alum. Int. Today, 2011, vol. 23, pp. 37-39.
6. Clark, A. F., Reed, R. P., 1983. Materials at low temperatures. American Society for Metals, Metals Park, Ohio.
7. F.R. Schwartzberg and M. Knight: Cryogenic Materials Data Handbook. Martin Marietta Corporation and Air Force Materials Laboratory (U.S.), 1970, AFML-TDR-64-280.
8. R.J. Selines and J.S. Van den Sype: Cryogenic Forming, 1979. USA Patent 4,159,217.
9. Schneider, R., Heine, B., Grant, R. J., Zouaui, Z.: Mater. Des. Appl., 2013, vol. 229, pp. 126-136.
10. Park, D. H., Choi, S. W., Kim, J. H., Lee, J. M.: Cryog., 2015, vol. 68, pp. 44-58.10.1016/j.cryogenics.2015.02.001 ↗
11. Takuda H., Mori K., Masuda I., Abe Y., Matsuo M.: J. Mat. Proc. Tec., 2002, vol. 120, pp. 412-41810.1016/S0924-0136(01)01180-3 ↗
12. Oh K. S., Oh K. H., Jang J. H., Kim D. J., Han K. S.: J. Mat. Proc. Tec., 2011, vol. 211, pp. 695-70710.1016/j.jmatprotec.2010.12.004 ↗
13. Zheng K., Politis D. J., Lin J., Dean T. A.: Int. J. Mat. Form, 2017, vol. 10, pp. 241-25410.1007/s12289-015-1273-4 ↗
14. Schneider, R., Grant, R. J., Heine, B., Börret, R., Zouaoui, Z., Burger, S.: Mater. Des., 2014, vol. 64, pp. 750-754.10.1016/j.matdes.2014.08.028 ↗
15. Swift, H. W.: Inst. Aut. Eng., 1939, vol. 34, p. 361.
16. Siebel, E., Beisswänger, H., W., 1955. Tiefziehen. Forschungsarbeiten auf dem Gebiet des Tiefziehens im Auftrag der Forschungsgesellschaft Blechverarbeitung. Karl-Hanser, München
17. Geleji, A., 1960. Bildsame Formgebung der Metalle in Rechnung und Versuch. Akademie, Berlin.
18. Siebel, E., Pankin, W., 1956. Ziehverfahren der Blechumformung. Zeitschrift für Metallkunde 47 (4), 207-212.
19. Pankin, W., 1961. Die Grundlagen des Tiefziehens im Anschlag unter besonderer Berücksichtigung der Tiefziehprüfung. Bänder Bleche Rohre I-III, Heft 6
20. Doege, E. D., Behrens B. A., 2007. Handbuch Umformtechnik, second ed. Springer, Heidelberg, pp. 270-272
21. Barlat, F., Lian, K.: Int. J. Plast. Part I, 1989, vol. 5, pp. 51-66.10.1016/0749-6419(89)90019-3 ↗
22. Logan, R. W., Hosford, W. F.: Int. J. Mech. Sci., 1980, vol. 22, pp. 419-430.10.1016/0020-7403(80)90011-9 ↗
23. Schneider, R., Grant, R. J., Sotirov, N., Falkinger, G., Grabner, F., Reichl, Ch., Scheerer, M., Heine, B., Zouaoui, Z.: Mater. Des., 2015, vol. 88, pp. 659-666.10.1016/j.matdes.2015.09.034 ↗
24. Sotirov, N., Falkner, G., Grabner, F., Schmid, G., Schneider, R., Grant, R. J., Kelsch, R., Radlmayr, K., Scheerer, M., Reichl, C., Sehrschön, H., Loipetsberger, M.: Proc. Mater. Today, 2, 113–118 (2002)10.1016/j.matpr.2015.05.027 ↗
25. Kumar, M., Sotirov, N., Grabner, F., Schneider R., Mozdzen, G.: Nonf. Met. Soc. China, 2017, vol. 27, pp. 1257-126310.1016/S1003-6326(17)60146-8 ↗
26. Wigley, D. A.: Mechanical Properties Of Materials At Low Temperatures. Plenum Press, New York-London, 197110.1007/978-1-4684-1887-3 ↗
27. Chen Y., Li Y., He L., Lu C., Hua D., Li Q.: Mat. Let., 2008, vol. 62, pp. 2821-282410.1016/j.matlet.2008.01.091 ↗
28. Smallmen, R. E., Bishop, R. J.: Modern Physical Metallurgy & Materials Engineering. Butterworth-Heinemann, Oxford, 1999
29. Park D. Y., Niewczas M.: Mater. Sci. Eng.: A., 2008, vol. 491, pp. 88-10210.1016/j.msea.2008.01.065 ↗
30. Grabner F., Österreicher J. A., Gruber B., Papenberg N., Gerstner F., Kirnstötter S., Schlögl C. M.: Adv. Eng. Mater., 2019, vol. 21, art. no. 1900089, https://doi.org/10.1002/adem.20190008910.1002/adem.201900089 ↗