Evolution of Substructure of a Non-equiatomic FeMnCrCo High Entropy Alloy Deformed at Ambient Temperature
Source abstract
Abstract
The present investigation aims at discerning the evolution of microstructure of a Fe40Mn40Cr10Co10 high entropy alloy, under uni-axial loading at room temperature. At the time of quasi-static uni-axial loading, the alloy exhibited an ultimate tensile strength of ~ 514 MPa with fracture strain of ~ 47 pct. Multiple stages of work hardening were observed during the deformation. The initial work hardening of the alloy, for the true strain of ɛ ~ 0.05 to 0.1, was facilitated by the rigorous planar slip of dislocations. Extensive cell formation in the mid-strain levels, i.e., for ɛ ~ 0.1 to 0.29, resulted in overall softening. The onset of microband formation was also observed during the mid-strain level, which further got populated in large numbers during the final stage of deformation. Simultaneous occurrence of twins as well as deformation induced FCC → HCP phase transformation was observed in the grains oriented along TD//〈111〉 in the fractured specimen. Highly dense dislocation walls were also found at strain ɛ ≥ 0.29. The alloy showed an overall increase in work hardening before fracture, which was ascribed to the occurrence of twins, FCC → HCP phase transformation, microbands, and highly dense dislocation walls.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
2. B. Cantor, I.T.H. Chang, P. Knight, and A.J.B. Vincent: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 213–218.10.1016/j.msea.2003.10.257 ↗
3. S. Ranganathan: Curr. Sci., 2004, vol. 85, pp. 1404–1406.
4. B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, and R.O. Ritchie: Science, 2014, vol. 345, pp. 1153–1158.10.1126/science.1254581 ↗
5. Z. Li, K.G. Pradeep, Y. Deng, D. Raabe, and C.C. Tasan: Nature, 2016, vol. 534, pp. 227–30.10.1038/nature17981 ↗
6. Y. Brif, M. Thomas, and I. Todd: Scr. Mater., 2015, vol. 99, pp. 93–96.10.1016/j.scriptamat.2014.11.037 ↗
7. F. Otto, A. Dlouhý, C. Somsen, H. Bei, G. Eggeler, and E.P. George: Acta Mater., 2013, vol. 61, pp. 5743–5755.10.1016/j.actamat.2013.06.018 ↗
8. Y.L. Chou, J.W. Yeh, and H.C. Shih: Corros. Sci., 2010, vol. 52, pp. 2571–2581.10.1016/j.corsci.2010.04.004 ↗
9. Y.Y. Chen, U.T. Hong, H.C. Shih, J.W. Yeh, and T. Duval: Corros. Sci., 2005, vol. 47, pp. 2679–2699.10.1016/j.corsci.2004.09.026 ↗
10. C.C. Tasan, Y. Deng, K.G. Pradeep, M.J. Yao, H. Springer and D. Raabe: JOM, 2014, vol. 66, pp. 1993–2001.10.1007/s11837-014-1133-6 ↗
11. B. Schuh, F. Mendez-martin, B. Völker, E.P. George, H. Clemens, R. Pippan, and A. Hohenwarter: Acta Mater., 2015, vol. 96, pp. 258–268.10.1016/j.actamat.2015.06.025 ↗
12. G. Laplanche, A. Kostka, O.M. Horst, G. Eggeler, and E.P. George: Acta Mater., 2016, vol. 118, pp. 152–163.10.1016/j.actamat.2016.07.038 ↗
13. A. Gali and E.P. George: Intermetallics, 2013, vol. 39, pp. 74–78.10.1016/j.intermet.2013.03.018 ↗
14. J. Wung, J. Bok, J. Moon, S. Su, M. Ji, H. Yong, B. Lee, and H. Seop: Acta Mater., 2018, vol. 161, pp. 388–399.10.1016/j.actamat.2018.09.057 ↗
15. Y. Wang, B. Liu, K. Yan, M. Wang, S. Kabra, Y. Chiu, D. Dye, P.D. Lee, Y. Liu, and B. Cai: Acta Mater., 2018, vol. 154, pp. 79–89.10.1016/j.actamat.2018.05.013 ↗
16. C.E. Slone, S. Chakraborty, J. Miao, E.P. George, M.J. Mills, and S.R. Niezgoda: Acta Mater., 2018, vol. 158, pp. 38-52.10.1016/j.actamat.2018.07.028 ↗
17. J. Miao, C.E. Slone, T.M. Smith, C. Niu, H. Bei, M. Ghazisaeidi, G.M. Pharr, and M.J. Mills: Acta Mater., 2017, vol. 132, pp. 35–48.10.1016/j.actamat.2017.04.033 ↗
18. Z. Li and D. Raabe: JOM, 2017, vol. 69, pp. 2099-2106.10.1007/s11837-017-2540-2 ↗
19. G. Laplanche, A. Kostka, C. Reinhart, J. Hunfeld, G. Eggeler, and E.P. George: Acta Mater., 2017, vol. 128, pp. 292–303.10.1016/j.actamat.2017.02.036 ↗
20. W. Huo, F. Fang, H. Zhou, Z. Xie, J. Shang, and J. Jiang: Scr. Mater., 2017, vol. 141, pp. 125–128.10.1016/j.scriptamat.2017.08.006 ↗
21. B. Gludovatz, A. Hohenwarter, K.V.S. Thurston, H. Bei, Z. Wu, E.P. George, and R.O. Ritchie: Nat. Commun., 2016, vol. 7, pp. 1–8.10.1038/ncomms10602 ↗
22. Y. Deng, C.C. Tasan, K.G. Pradeep, H. Springer, A. Kostka, and D. Raabe: Acta Mater., 2015, vol. 94, pp. 124–133.10.1016/j.actamat.2015.04.014 ↗
23. G.K. Williamson and W.H. Hall: Acta Metall., vol. 1, pp. 22-31, 1953.10.1016/0001-6160(53)90006-6 ↗
24. K Jeong, J-E Jin, Y-S Jung, S Kang, and Y-K Lee: Acta Mater., 2013, vol. 61, pp. 3399-3410.10.1016/j.actamat.2013.02.031 ↗
25. E.J. Mittemeijer and U Welzel: Z. Kristallogr., 2008, vol. 223, pp. 552-60.10.1524/zkri.2008.1213 ↗
26. G.K. Williamson and R.E. Smallman: Phil. Mag., 1956, vol. 1, pp. 34–46.10.1080/14786435608238074 ↗
27. R.E. Smallman and K.H. Westmacott: Phil. Mag., 1957, vol. 2, pp. 669-83.10.1080/14786435708242709 ↗
28. Y.H. Zhao, H.W. Shang, and K. Lu: Acta Mater., 2001, vol. 49, pp. 365–75.10.1016/S1359-6454(00)00310-4 ↗
29. B. Fultz and J. Howe: Transmission Electron Microscopy and Diffractometry of Materials, Springer, New Yrok, 2007
30. K.T. Park, K.G. Jin, S.H. Han, S.W. Hwang, K. Choi, and C.S. Lee: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3651–3661.10.1016/j.msea.2010.02.058 ↗
31. J.D. Yoo and K.T. Park: Mater. Sci. Eng. A, 2008, vol. 496, pp. 417–424.10.1016/j.msea.2008.05.042 ↗
32. F.Y. Dong, P. Zhang, J.C. Pang, Q.Q. Duan, Y.B. Ren, K. Yang, and Z.F. Zhang: Acta Metall. Sin. 2016, vol. 29, pp. 140–14910.1007/s40195-016-0370-9 ↗
33. D. Canadinc, H. Sehitoglu, H.J. Maier, and Y.I. Chumlyakov: Acta Mater., 2005, vol. 53, pp. 1831–1842.10.1016/j.actamat.2004.12.033 ↗
34. Y.-K. Lee: Scr. Mater., 2012, vol. 66, pp. 1002–1006.10.1016/j.scriptamat.2011.12.016 ↗
35. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–219.10.1016/0956-7151(92)90296-Q ↗
36. N. Hansen and D.J. Jensen: Philos. Trans. R. Soc. A, 1999, vol. 357, pp. 1447–1469.10.1098/rsta.1999.0384 ↗
37. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng. A, 2001, vol. 315, pp. 211–216.10.1016/S0921-5093(01)01204-7 ↗
38. X. Huang: Scr. Mater., 1998, vol. 38, pp. 1697–1703.10.1016/S1359-6462(98)00051-7 ↗
39. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2011, vol. 59, pp. 6449–6462.10.1016/j.actamat.2011.07.009 ↗
40. P.S. Follansbee, and U.F. Kocks, Acta Metall., 1988, vol. 36, pp. 81–93.10.1016/0001-6160(88)90030-2 ↗
41. D.T. Pierce, J.A. Jiménez, J. Bentley, D. Raabe, and J.E. Wittig: Acta Mater., 2015, vol. 100, pp. 178–190.10.1016/j.actamat.2015.08.030 ↗
42. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd edn. Elsevier, New York, 2004.
43. K.T. Park, G. Kim, S.K. Kim, S.W. Lee, S.W. Hwang, and C.S. Lee: Met. Mater. Int., 2010, vol. 16, pp. 1–6.10.1007/s12540-010-0001-3 ↗
44. P.L. Mangonon and G. Thomas: Metall. Trans., 1970, vol. 1, pp. 1577–1586.10.1007/BF02642003 ↗
45. C. Wang, W. Cao, J. Shi, C. Huang, and H. Dong: Mater. Sci. Eng. A, 2013, vol. 562, pp. 89–95.10.1016/j.msea.2012.11.044 ↗
46. Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo: Mater. Sci. Eng. A, 2012, vol. 552, pp. 514–522.10.1016/j.msea.2012.05.080 ↗
47. J.W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
48. T.-H. Lee, C.-S. Oh, S.-J. Kim, and S. Takaki: Acta Mat., 2007, vol. 55, pp. 3649–3662.10.1016/j.actamat.2007.02.023 ↗
49. L. Bracke, L. Kestens, and J. Penning: Scr. Mater., 2009, vol. 61, pp. 220–222.10.1016/j.scriptamat.2009.03.045 ↗
50. I. Gutierrez-Urrutia and D. Raabe: Acta Mater., 2012, vol. 60, pp. 5791–5802.10.1016/j.actamat.2012.07.018 ↗
51. I. Gutierrez-Urrutia, S. Zaefferer, and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3552–6010.1016/j.msea.2010.02.041 ↗
52. P. Yang, Q. Xie, L. Meng, H. Ding, and Z. Tang: Scr. Mater., 2006, vol. 55, pp. 629–31.10.1016/j.scriptamat.2006.06.004 ↗
53. L. Meng, P. Yang, Q. Xie, H. Ding, and Z. Tang, Scr. Mater., 2007, vol. 56, pp. 931–34.10.1016/j.scriptamat.2007.02.028 ↗
54. H. Fujita and T. Mori: Scr. Metall., 1975, vol. 9, pp. 631–636.10.1016/0036-9748(75)90476-7 ↗
55. S. Mahajan and G.Y. Chin: Acta Metall., 1973, vol. 21, pp. 1353–1363.10.1016/0001-6160(73)90085-0 ↗
56. H. Fujita and S. Ueda: Acta Met., 1972, vol. 20, pp. 759-767.10.1016/0001-6160(72)90104-6 ↗
57. J.W. Brooks, M.H. Loretto, and R.E. Smallman: Acta Metall., 1979, vol. 27, pp. 1829–1838.10.1016/0001-6160(79)90073-7 ↗
58. J.W. Brooks, M.H. Loretto, and R.E. Smallman: Acta Metall., 1979, vol. 27, pp. 1839–1847.10.1016/0001-6160(79)90074-9 ↗
59. H. Idrissi, L. Ryelandt, M. Veron, D. Schryvers, and P.J. Jacques: Scr. Mater., 2009, vol. 60, pp. 941–944.10.1016/j.scriptamat.2009.01.040 ↗
60. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng. A., 1989, vol. 113, pp.1–41.10.1016/0921-5093(89)90290-6 ↗