Experimental and Theoretical Research on the Corrosion Resistance of Ferrous Alloys in Aluminum Melts
Source abstract
Abstract
The resistance of three ferrous alloys (HT150, QT500, and H13) to corrosion caused by exposure to aluminum melts has been systematically studied using experiments and modeling. Results show that the exfoliation and dissolution of intermetallic compounds like Fe2Al5 and FeAl3 formed by the interdiffusion between aluminum melts and ferrous alloys are responsible for the corrosive attack. Based on the thermodynamics and kinetics of intermetallic compounds, an analytical model has been established to quantitatively account for the corrosion behavior between the ferrous alloys and aluminum melts, and the diffusion inhibition factor λ is first introduced in this work to quantitatively estimate the extent to which the existence of carbon can influence the diffusion of aluminum melts to the ferrous alloys. Theoretical analysis demonstrates that the flake graphite in HT150 can reduce the corrosion rate most effectively, followed by spheroidal graphite in QT500. Both outperform H13.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. H. Yang, W.T. Tsai, J.C. Kuo and C. Yang: J. Alloys Compd., 2011, vol. 509, pp. 8176-82.10.1016/j.jallcom.2011.05.104 ↗
2. V. Nunes, F.J.G. Silva, M.F. Andrade, R. Alexandre and A.P.M. Baptista: Surf. Coat. Technol., 2017, vol. 332, pp. 319-31.10.1016/j.surfcoat.2017.05.098 ↗
3. N.L. Okamoto, J. Okumura, M. Higashi and H. Inui: Acta Mater., 2017, vol. 129, pp. 290-99.10.1016/j.actamat.2017.02.060 ↗
4. M. Yousaf, J. Iqbal and M. Ajmal: Mater. Charact., 2011, vol. 62, pp. 517-25.10.1016/j.matchar.2011.03.004 ↗
5. X. Zhang, W. Chen, H. Luo, S. Li, T. Zhou and L. Shi: Corros. Sci., 2017, vol. 125, pp. 20-28.10.1016/j.corsci.2017.05.024 ↗
6. D. Alonso-Peña, M.E. Arnáiz-García, J.L. Valero-Gasalla, A.M. Arnáiz-García, R. Campillo-Campaña, J. Alonso-Peña, J.M. González-Santos, A.L. Fernández-Díaz and J. Arnáiz: Burns, 2015, vol. 41, pp. 1122-25.10.1016/j.burns.2014.12.003 ↗
7. S. Komarov and D. Kuznetsov: Int. J. Refract. Met. Hard Mater., 2012, vol. 35, pp. 76-83.10.1016/j.ijrmhm.2012.04.004 ↗
8. N. Tunca, G.W. Delamore and R.W. Smith: Metall. Mater. Trans. A, 1990, vol. 21, pp. 2919-28.10.1007/BF02647212 ↗
9. N. Tang, Y.P. Li, S. Kurosu, H. Matsumoto and A. Chiba: Corros. Sci., 2012, vol. 60, pp. 32-37.10.1016/j.corsci.2012.04.015 ↗
10. Y. Li, N. Tang, P. Tunthawiroon, Y. Koizumi and A. chiba: Corros. Sci., 2013, vol. 73, pp. 72-79.10.1016/j.corsci.2013.03.026 ↗
11. H. Xiao, W. Chen and Z. Liu: Trans. Nonferrous Met. Soc. China, 2012, vol. 22, pp. 2320-26.10.1016/S1003-6326(11)61466-0 ↗
12. M.B. Lin, C.J. Wang and A.A. Volinsky: Surf. Coat. Technol., 2011, vol. 206, pp. 1595-99.10.1016/j.surfcoat.2011.06.010 ↗
13. D. Cong, H. Zhou, Z. Ren, H. Zhang, L. Ren, C. Meng and C. Wang: Opt. Laser. Eng., 2014, vol. 54, pp. 55-61.10.1016/j.optlaseng.2013.09.012 ↗
14. M.S. Sidhu: PhD thesis, University of Canterbury, 2012.
15. D. Balloy, J.C. Tissier, M.L. Giorgi, M.L. Giorgi and M. Briant: Metall. Mater. Trans. A, 2010, vol. 41, pp. 2366-76.10.1007/s11661-010-0306-3 ↗
16. J. Rong, Z. Kang, S. Chen, D. Yang, J. Huang and J. Yang: Mater. Charact., 2017, vol. 132, pp. 413-21.10.1016/j.matchar.2017.09.012 ↗
17. A.V. Alboom, B. Lemmens, B. Breitbach, E.D. Grave, S. Cottenier and K. Verbeken: Surf. Coat. Technol., 2017, vol. 324, pp. 419-28.10.1016/j.surfcoat.2017.05.091 ↗
18. Z. Ding, Q. Hu, W. Lu, X. Ge, S. Gao, S. Sun, T. Yang, M. Xia and J. Li: Mater. Charact., 2018, vol. 136, pp. 157-64.10.1016/j.matchar.2017.12.024 ↗
19. K. Bouche, F. Barbier and A. Coulet: Mater. Sci. Eng. A, 1998, vol. 249, pp. 167-75.10.1016/S0921-5093(98)00573-5 ↗
20. T. Heumann and S. Dittrich: Z. Metallkunde, 1959, vol. 50, pp. 617-25.
21. S. Chen, D. Yang, M. Zhang, J. Huang and X. Zhao: Metall. Mater. Trans. A, 2016, vol. 47, pp. 5088-100.10.1007/s11661-016-3667-4 ↗
22. M.S. Sidhu, C.M. Bishop and M.V. Kral: Int. J. Cast Met. Res., 2014, vol. 27, pp. 321-28.10.1179/1743133614Y.0000000110 ↗
23. H. Springer, A. Kostka, E.J. Payton, D. Raabe, A. Kaysser-Pyzalla and G. Eggeler: Acta Mater., 2011, vol. 59, pp. 1586-600.10.1016/j.actamat.2010.11.023 ↗
24. T. Etter, P. Schulz, M. Weber, J. Metz, M. Wimmler, J.F. Löffler and P.J. Uggowitzer: Mater. Sci. Eng. A, 2007, vol. 448, pp. 1-6.10.1016/j.msea.2006.11.088 ↗
25. A. Ureña, J. Rams, M.D. Escalera and M. Sánchez: Compos. Sci. Technol., 2005, vol. 65, pp. 2025-38.10.1016/j.compscitech.2005.04.013 ↗
26. B. Liu, Hot dip aluminizing of steel, Metallurgical Industry Press, Beijing, 1995, pp. 21-23.
27. G. Wang, A. Meng, and Z. Ren: Physical Chemistry, 3rd ed., Shanghai Scientific & Technical Publishers, Shanghai, 2007, pp. 293–302.
28. S. Mei, M. Gao, J. Yan, C. Zhang, G. Li and X. Zeng: Sci. Technol. Weld. Joining, 2013, vol. 18(4), pp. 293-300.10.1179/1362171813Y.0000000106 ↗
29. R.W. Richards, R.D. Jones, P.D. Clements and H. Clarke: Int. Mater. Rev, 1994, vol.39, pp. 191-212.10.1179/imr.1994.39.5.191 ↗
30. N. Tang, Y. Li, Y. Koizumi, S. Kurosu and A. Chiba: Corros. Sci., 2013, vol. 73, pp. 54-61.10.1016/j.corsci.2013.03.024 ↗
31. L.L. Bircumshaw and A.C. Riddiford: Q. Rev. Chem. Soc., 1952, vol. 6, pp. 157-85.10.1039/qr9520600157 ↗
32. V.N. Yeremenko, Y.V. Natanzon and V.I. Dybkov: J. Mater. Sci., 1981, vol. 16, pp. 1748-56.10.1007/BF00540620 ↗
33. J.R. Davis, Metals Handbook Desk Edition. ASM, USA, 1998.
34. V.N. Eremenko, Y.V. Natanzon and V.I. Dybkov: J. Mater. Sci., 1985, vol. 20, pp. 501-07.10.1007/BF00723542 ↗
35. H. Rezaei, M.R. Akbarpour and H.R. Shahverdi: JOM, 2015, vol. 67, pp. 1443-50.10.1007/s11837-015-1435-3 ↗
36. J. Mackowiak and L.L. Shreir (1959) J Less Common Met 1(6):456-466.10.1016/0022-5088(59)90062-1 ↗