Effective Activation Energy for the Solid-State Sintering of Silicon Carbide Ceramics
Source abstract
Abstract
Effective activation energy for densification of SiC in the presence of C and B4C additives is determined by constant heating rate experiments through analysis of shrinkage in hot pressing. The activation energy (AE) for sintering increased linearly with the relative density (RD) in two different regimes. The effective AE increased from 407 ± 50 kJ/mole at 75 pct RD to 1132 ± 75 kJ/mole at 95 pct RD. Lattice diffusion is proposed as the predominant mechanism for SiC densification at higher density. This is also validated by the uniform distribution of sintering additive through electron probe microanalysis. The low AE in the regime of lower density could be attributed to the pressure-assisted particle rearrangement during hot pressing. The relative contribution of both the mechanisms between two density limits resulted in the change in AE for sintering. The mechanisms of defect generation resulting in densification are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. K. Yamada and M. Mohri: in S. Somiya and Y. Inomata (Eds.) Silicon Carbide Ceramics-1: Fundamentals and Solid Reaction, Elsevier Applied Science, New York, 1991, pp. 13-44.10.1007/978-94-011-3842-0_2 ↗
2. H. Tanaka: J. Ceram. Soc. Jap., 2011, vol. 119, pp. 218-233.10.2109/jcersj2.119.218 ↗
3. M. Flinders, D. Ray, A. Anderson, and R.A. Cutler: J. Am. Ceram. Soc., 2005, vol. 88, pp. 2217-26.10.1111/j.1551-2916.2005.00415.x ↗
4. C. Greskovich and J. H. Rosolowski: J. Am. Ceram. Soc., 1976, vol. 59, pp. 336-343.10.1111/j.1151-2916.1976.tb10979.x ↗
5. V. A. Bron: Sov. Powder. Metall. Met. Ceram., 1975, vol. 54, pp. 339-344.
6. J. J. Melendez-Martinez, M. Castillo-Rodriguez, and A. Dominguez-Rodriguez: J. Am. Ceram. Soc., 2007, vol. 90, pp. 163-169.10.1111/j.1551-2916.2006.01350.x ↗
7. J. F. A. Munoz, A. R. A Lopez, F. M. V. Feria, A. D. Rodriguez, and M. Singh: Acta Mater., 2003, vol. 51, pp. 3259-3275.10.1016/S1359-6454(03)00157-5 ↗
8. S. Prochazka: The Role of Boron and Carbon in Sintering of Silicon Carbide in Special Ceramics, P. Popper, ed., British Ceramic Society, Stoke-on-Trent, 1975, vol. 6, pp. 171–81.
9. W. van Rijswijk and D. J. Shanefield: J. Am. Ceram. Soc., 1990, vol. 73, pp. 148-149.10.1111/j.1151-2916.1990.tb05109.x ↗
10. W. J. Clegg: J. Am. Ceram. Soc., 2000, vol. 83, pp. 1039-1043.10.1111/j.1151-2916.2000.tb01327.x ↗
11. F. F. Lange and T. K. Gupta: J. Am. Ceram. Soc., 1976, vol. 59, pp. 537-538.10.1111/j.1151-2916.1976.tb09435.x ↗
12. R. Kieffer, E. Gugel, G. Leimer, and P. Ettmayer: Ber Dt Keram Ges., 1972, vol. 49, pp. 41-46.
13. P. Barick, D. Chakravarty, B. P. Saha, R. Mitra, and S. V. Joshi: Ceram. Inter. 2016, vol. 42, pp. 3836-3848.10.1016/j.ceramint.2015.11.048 ↗
14. A. Malinge, A. Coupe, Y. Petitcorps, and R. Pailler: J. Euro. Ceram. Soc., 2012, vol. 32, pp. 4393-4400.10.1016/j.jeurceramsoc.2012.06.008 ↗
15. M. S. Datta, A. K. Bandyopadhyay, and B. Cahudhuri: Bull. Mater. Sci., 2002, vol. 25, pp. 181-189.10.1007/BF02711151 ↗
16. J. Wang and R. Raj: J. Am. Ceram. Soc., 1990, vol. 73, pp. 1172-1175.10.1111/j.1151-2916.1990.tb05175.x ↗
17. J. Wang and R. Raj: J. Am. Ceram. Soc., 1991, vol. 74, pp. 1959-1963.10.1111/j.1151-2916.1991.tb07815.x ↗
18. D. A. Ray, S. Kaur, R. A. Cutler, and D. K. Shetty: J. Am. Ceram. Soc., 2008, vol. 91, pp. 1135-1140.10.1111/j.1551-2916.2008.02271.x ↗
19. M. G. Bothara, S. V. Atre, S. J. Park, R. M. German, T. S. Sudarshan, and R. Radhakrishnan: Metal. Mater. Trans. A., 2010, vol. 41A, pp. 3252-3261.10.1007/s11661-010-0378-0 ↗
20. C. Ziccardi and R. Haber: Addition of Excess Carbon to SiC to Study its Effect on Silicon Carbide (SiC) Armor in Advances in Ceramic Armor II: Ceram. Eng. Sci. Proc., L. Prokurat, A. Wereszczak, and E. Lara-Curzio eds., 2008, vol. 27, pp. 97–103.10.1002/9780470291368.ch8 ↗
21. G. Bernard-Granger and C. Guizard: J. Am. Ceram. Soc., 2007, vol. 90, pp. 1246-1250.10.1111/j.1551-2916.2006.01415.x ↗
22. J. D. Hong and R. F. Davis: J. Am. Ceram. Soc., 1980, vol. 63, pp. 546-552.10.1111/j.1151-2916.1980.tb10762.x ↗
23. T. T. Fang, J. T. Shiue and F. S Shiau: Mater. Chem. Phys., 2003, vol. 80, pp. 108-113.10.1016/S0254-0584(02)00373-5 ↗
24. D. S. Wilkinson and M. F. Ashby: Acta Mater., 1975, vol. 23, pp. 1277-1285.10.1016/0001-6160(75)90136-4 ↗
25. R. Hamminger, G. Grathwohl, and F. Thummler: J. Mater. Sci., 1983, vol. 18, pp. 3154-3160.10.1007/BF00700800 ↗
26. W. D. Kingery, H. K. Bowen and R. D. Uhlmann: Introduction to Ceramics, Second ed., John Wiley & Sons Inc., New York, 1976.
27. R. N. Ghostagore and R. L. Coble: Phys. Rev., 1966, vol. 143, pp. 623-626.10.1103/PhysRev.143.623 ↗
28. K. M. Friederich and R. L. Coble: J. Am. Ceram. Soc., 1083, vol. 66, pp. C141-142.
29. P. T. B. Shaffer: Mat. Res. Bull., 1970, vol. 5, pp. 519-522.10.1016/0025-5408(70)90061-9 ↗
30. Y. Tajima and W. D. Kingery: J. Am. Ceram. Soc. 1982, vol. 65, pp. C27-29.10.1111/j.1151-2916.1982.tb10375.x ↗
31. S. G. Sridhara, L. L. Clemen, R. P. Devaty, W. J. Choyke, D. J. Larkin, H. S. Kong, T. Troffer, and G. Pensl: J .App. Phys., 1998, vol. 83, pp. 7909-7919.10.1063/1.367970 ↗
32. D. P. Brine: J. Am. Ceram. Soc., 1968, vol. 69, pp. C33- 35.
33. S. Grasso, T. Saunders, H. Porwal, and M. Reece: Ceram. Inter., 2015, vol. 14, pp. 225-230.10.1016/j.ceramint.2014.08.062 ↗