In Situ Characterization at Elevated Temperatures of a New Ni-Based Superalloy VDM-780 Premium
Source abstract
Abstract
Abstract A new Ni-base superalloy VDM-780 Premium was developed for higher service temperatures (above 650 °C), keeping the good processing characteristics of alloy 718. This article presents, for the first time, the morphology and the microstructure characterization of this newly developed superalloy VDM-780 by means of scanning electron microscopy (SEM) and neutron and X-ray diffraction (XRD), after three different aging treatments performed for setting up different microstructures. Results show the presence of theγ-matrix,γ′-hardening phase, and a high-temperature phase whose structure is compatible withδandηphases but whose exact crystal structure or the possibility of two different high-temperature phases still remains open. Rietveld refinements have allowed phase identification, determination of the lattice constants, and the weight fractions of constituting phases and shown that the presence of the different phases, amount, and morphology highly depend on the aging treatments. No traces of theγ″ phase are observed regardless of the heat treatment.In situneutron diffraction (ND) studies at high temperature have allowed the determination of the solvus temperatures of the different phases present in each material after the corresponding aging treatment as well as the study of the evolution of their lattice parameters with temperature. The Vickers hardness (HV) of the three different samples was measured, and the results are correlated with the amount and particle size of theγ′-hardening phase of each sample.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. T.M. Pollock and S. Tin: J. Propul. Power., 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
2. Furrer, D., and H. Fecht: J. Miner. Metall. Mater. Soc., 1999, vol. 51, pp. 14–17.10.1007/s11837-999-0005-y ↗
3. N. Wagner, M. Hofmann, S. Van Petegem, C. Krempaszky, M. Hoelzel, and M. Stockinger: Mater. Sci. Eng. A-Struct., 2016, vol. 662, pp. 303–07.10.1016/j.msea.2016.03.059 ↗
4. Mukherji, D. Del Genovese, P. Strunz, R Gilles, A Wiedenmann, and J. Rösler: J. Phys.: Condens. Matter., 2008, vol. 20, pp. 104220.
5. Gilles, D. Mukherji, H. Eckerlebe, L. Karge, P. Staron, P. Strunz, and T. Lippmann: J. Alloys Compd., 2014, vol. 612, pp. 90–97.10.1016/j.jallcom.2014.05.154 ↗
6. Slama, C., and M. Abdellaoui: J. Alloy Compd., 2000, vol. 306, pp. 277–84.10.1016/S0925-8388(00)00789-1 ↗
7. Del Genovese, P. Strunz, D. Mukherji, R. Gilles, and J. Rösler: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3439–50.10.1007/s11661-005-0017-3 ↗
8. Fisk, M., J. Andersson, R. du Rietz, S. Haas, and S. Hall: Mater. Sci. Eng. A-Struct., 2014, vol. 612, pp. 202–07.10.1016/j.msea.2014.06.036 ↗
9. Antonov, S., M. Detrois, R.C. Helmink, and S. Tin: J. Phys.: Condens. Matter., 2015, vol. 626, pp. 76–86.
10. Fedorova, T., J. Rösler, J. Kloewer, and B. Gehrmann: Matec. Web Conf., 2014, vol. 14, pp. 01003.10.1051/matecconf/20141401003 ↗
11. Wang, M., J. Du, Q. Deng, Z. Tian, and J. Zhu: J. Alloy Compd., 2017, vol. 701, pp. 635–44.10.1016/j.jallcom.2017.01.145 ↗
12. T. Fedorova, J. Rösler, B. Gehrmann, and J. Kloewer: 8th Int. Symp. on Superalloy 718 and Derivates, E. Ott, A. Banik, J. Andersson, I. Dempster, T. Gabb, J. Groh, K. Heck, R. Helmink, X. Liu, and A. Wusatowska-Sarnek, eds., TMS, Warrendale, PA, 2014, pp. 587–99.
13. Gilles, R., B. Krimmer, H. Boysen, and H. Fuess: Appl. Phys. A, 2002, vol. 74, pp. 148–50.10.1007/s003390201739 ↗
14. Hoelzel, M., A. Senyshyn, N. Juenke, H. Boysen, W. Schmahl, and H. Fuess: Nucl. Instrum. A, 2012, vol. 667, pp. 32–37.10.1016/j.nima.2011.11.070 ↗
15. Fischer, G. Frey, M. Koch, M. Könnecke, V. Pomjakushin, J. Schefer, R. Thut, N. Schlumpf, R. Bürge, U. Greuter, S. Bondt, and E. Berruyer: Physica B, 2000, vol. 276-278, pp. 146–47.10.1016/S0921-4526(99)01399-X ↗
16. M. Rietveld: J. Appl. Crystallogr., 1969, vol. 2, pp. 65–71.10.1107/S0021889869006558 ↗
17. Degen, M. Sadki, E. Bron, U. König, and G. Nénert: Powder Diffr., 2014, vol. 29 (S2), pp. 13–18.10.1017/S0885715614000840 ↗
18. Rodríguez-Carvajal, J.: Phys. B Condens. Matter., 1993, vol. 192, pp. 55–69.10.1016/0921-4526(93)90108-I ↗
19. H. Chung and D.K. Smith: Industrial Applications of X-ray Diffraction, Marcel Dekker, Inc., New York, NY, 2000.
20. Strunz, P., M. Petrenec, V. Davydov, J. Polák, and P. Beran: Adv. Mater. Sci. Eng., 2013, vol. 2013, pp. 408347.10.1155/2013/408347 ↗
21. Antonov, S., J. Huo, Q. Feng, D. Isheim, D.N. Seidman, R.C. Helmink, E. Sun, and S. Tin: Mater. Sci. Eng. A, 2017, vol. 687, pp. 232–40.10.1016/j.msea.2017.01.064 ↗
22. Fedorova,T.: Entwicklung einer neuen Nickelbasis-Superlegierung auf Basis von Alloy 718, Gulliver Verlag, Göttingen, 2013.
23. Coakley, J., E.A. Lass, D. Ma, M. Frost, H.J. Stone, D.N. Seidman, and D.C. Dunand: Acta Mater., 2017, vol. 136, pp. 118–25.10.1016/j.actamat.2017.06.025 ↗
24. N. Saunders, Z. Guo, X. Li, A.P. Miodownik, and J.P. Schille: Superalloys 2004, K.A. Green, T.M. Pollock, and H. Harada, eds., TMS, Warrendale, PA, 2004, pp. 849–58.10.7449/2004/Superalloys_2004_849_858 ↗