Effect of Carbon in the Dielectric Fluid and Workpieces on the Characteristics of Recast Layers Machined by Electrical Discharge Machining
Source abstract
Abstract
Electrical discharge machining (EDM) is a popular non-traditional machining technique that is usually performed in kerosene. Carbon from the kerosene is mixed into the recast layer during EDM, increasing its hardness. EDM can be performed in deionized water, which causes decarburization. We studied the effects of carbon in the dielectric fluid and workpiece on the characteristics of recast layers. Experiments were conducted using gray cast iron and mild steel workpieces in deionized water or kerosene under identical operating conditions. Scanning electron microscopy revealed that the recast layer formed on gray iron was rougher than that produced on mild steel. Moreover, the dispersion of graphite flakes in the gray iron seemed to cause subsurface cracks, even when EDM was performed in deionized water. Dendritic structures and iron carbides were found in the recast layer of gray iron treated in deionized water. Kerosene caused more microcracks to form and increased surface roughness compared with deionized water. The microcrack length per unit area of mild steel treated in deionized water was greater than that treated in kerosene, but the cracks formed in kerosene were wider. The effect of the diffusion of carbon during cooling on the characteristics of the recast layer was discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. [1] Y. Zhang, Y. Liu, Y. Shen, R. Ji, Z. Li, C. Zheng, J. Mater. Process. Technol., 2014, vol. 214, no. 5, pp. 1052–1061.10.1016/j.jmatprotec.2013.12.012 ↗
2. M. Barash, M.G. Sri-Ram, Proceedings of Third International Machine Tool Design and Research Conference, Birmingham, 1962, pp. 85–91
3. [3] J.C. Rebelo, A.M. Diaz, D. Kremer, J.L. Lebrun, J. Mater. Process. Technol., 1998, Vol.84, no.1–3, pp. 90–99.10.1016/S0924-0136(98)00082-X ↗
4. B. Ekmekci, Metall. Mater. Trans. B, Process., 2009, Sci. 40, pp.70–81.10.1007/s11663-008-9220-0 ↗
5. [5] J.P. Kruth, L. Stevens, L. Froyen, B. Lauwers, K.U. Leuven, Ann. CIRP, 1995, vol.44, pp. 169–172.10.1016/S0007-8506(07)62299-9 ↗
6. M.D. Nguyen, M. Rahman, Y.S. Wong, Int. J. Machine Tools & Manufact, March–April 2012, vol. 54–55, pp. 55-65.10.1016/j.ijmachtools.2011.11.005 ↗
7. [7] M.L. Jeswani, Wear, 1981, vol. 7, no. 1, pp. 81–88.10.1016/0043-1648(81)90285-4 ↗
8. W. Konig, F.J. Siebers: American Society of Mechanical Engineers, Production Engineering Division (Publication), 1993, vol. 64, pp. 649–58
9. [9] S.L. Chen, B.H. Yan, F.Y. Huang, J. Mater. Process. Technol., 1999, vol. 87, pp. 107–111.10.1016/S0924-0136(98)00340-9 ↗
10. [10] G. Cusanelli, A. Hessler-Wyser, F. Bobard, R. Demellayer, R. Perez, R. Flükiger, J. Mater. Process. Technol., 2004, Vol. 149, pp. 289–295.10.1016/j.jmatprotec.2003.11.047 ↗
11. M. Barash, Metals Eng., 1965, Q.5, pp. 48–51.
12. [12] B.H. Yan, H.C. Tsa, F.Y. Huang, Int. J. Machine Tools & Manufact., 2005, vol. 45, pp. 194–200.10.1016/j.ijmachtools.2004.07.006 ↗
13. [13] M.P. Groover: Fundamentals of modern manufacturing, materials, processes, and systems, 4th ed., p. 118, Publisher John Wiley & Son Inc., New York, 2010.
14. [14] K.T. Chiang, F.P. Chang, D.C. Tsai, J. Mater. Process. Technol., 2007, vol.182, pp. 525–533.10.1016/j.jmatprotec.2006.09.012 ↗
15. [15] Y. Zhang, Y. Liu, R. Ji, B. Cai, Appl. Surf. Sci., 2011, vol. 257, pp. 5989–5997.10.1016/j.apsusc.2011.01.083 ↗
16. M.K. Satyarthi, P.M. Pandey, ASME 2013 International Mechanical Engineering Congress and Exposition, Volume 2B: Advanced Manufacturing, San Diego, California, USA, 2013, pp. 62–67
17. G.N. Levy, CIRP Annals - Manufact. Technol., 1993, vol. 42, no.1, pp. 227–230.10.1016/S0007-8506(07)62431-7 ↗
18. [18] F.N. Leão, I.R. Pashby, J. Mater. Process. Technol., vol. 149, June 2004, pp. 341–346.10.1016/j.jmatprotec.2003.10.043 ↗
19. [19] Y.H. Guu, M.T.K. Hou, Mater. Sci. Eng. A, September 2007, vol. 466, pp. 61–67.10.1016/j.msea.2007.02.035 ↗
20. [20] B. Ekmekci, A.E. Tekkaya, A. Erden, Int. J. Machine Tools & Manufact., 2006, vol. 46, pp. 858–868.10.1016/j.ijmachtools.2005.07.020 ↗
21. [21] B. Ekmekci, Appl. Surf. Sci., 2007, vol. 253, pp. 9234–9240.10.1016/j.apsusc.2007.05.078 ↗
22. [22] F.J. O’Brien, D. Taylor, T.C. Lee, J. Biomech., 2003, vol. 36, pp. 973–980.10.1016/S0021-9290(03)00066-6 ↗
23. [23] W. König, L. Jörres, CIRP Annals - Manufact. Technol., 1987, vol. 36, no.1, pp. 105–109.10.1016/S0007-8506(07)62564-5 ↗
24. [24] D.E. Jiang, E.A. Carter, Phys. Rev. B, 2003, vol. 67, pp 1–11.10.1103/PhysRevB.67.214103 ↗
25. N.G. Shaposhnikov, B.M. Mogutnov, Russ. Metall., 2008, vol. 2008, no.2, pp. 174-179.10.1134/S003602950802016X ↗
26. [27] F. Ghanem, C. Braham, H. Sidhom, J. Mater. Process. Technol., 2003, vol. 142, pp. 163–173.10.1016/S0924-0136(03)00572-7 ↗
27. J.P. Kruth, J. Van Humbeeck, L. Stevens, Proceedings of the ISEM XI, 1995, pp. 849–62.
28. [28] L.C. Lim, L.C. Lee, Y.S. Wong, H.H. Lu, Mater. Sci. Technol., 1991, vol. 7, pp. 239–248.10.1179/mst.1991.7.3.239 ↗
29. [29] E.D. Cabanillas, J. Desimoni, G. Punte, R.C. Mercader, Mater. Sci. Eng. A, 2000, vol. 276, pp. 133–140.10.1016/S0921-5093(99)00443-8 ↗
30. [30] H.T. Lee, T.Y. Tai, J. Mater. Process. Technol., 2003, vol. 142, no.3, pp. 676–683.10.1016/S0924-0136(03)00688-5 ↗