Oxidation of Ti3SiC2 composites in air
Source abstract
Abstract
The oxidation of Ti3SiC2 composites (75 at. pct Ti3SiC2 and 25 at. pct TiCx), prepared via self-propagating high-temperature synthesis (SHS) and subsequent shock consolidation, has been studied in the range of 1073 to 1573 K in this research. The oxidation kinetics are parabolic with an activation energy of approximately 240±20 kJ/mol. As shown by transmission electron microscopy (TEM) during the very early stages of oxidation, the oxide layer formed contains amorphous SiO2 and crystalline rutile (TiO2). As oxidation proceeds, a two-layered oxide scale is observed with the outer oxide layer consisting of columnar TiO2 with trace amounts of SiO2 and the inner oxide layer being comprised of a mixture of amorphous SiO2 and fine crystalline TiO2. The grain size of the outermost oxide (TiO2) increases with increasing oxidation temperature. The oxidation resistance of the Ti3SiC2 composites prepared by SHS and subsequent shock consolidation is similar to the oxidation of Ti3SiC2 prepared by other means with comparable parabolic constants.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. M.W. Barsoum and T. El-Raghy: Adv. Mater. Proc., 1997, vol. 7, pp. 51–52.
2. W. Jeitschko and H. Nowotny: Monatsh. Chem., 1967, vol. 98, pp. 329–3710.1007/BF00899949 ↗
3. T. Goto and T. Hirai: Mater. Res. Bull., 1987, vol. 22, pp. 1195–1201.10.1016/0025-5408(87)90128-0 ↗
4. S. Arunajatesan and A.H. Carim: J. Am. Ceram. Soc., 1995, vol. 78, pp. 667–72.10.1111/j.1151-2916.1995.tb08230.x ↗
5. J. Lis, R. Pampuch, J. Piekarczyk, and L. Stobierski: Ceram. Int., 1993, vol. 19, pp. 219–22.10.1016/0272-8842(93)90052-S ↗
6. Z.A. Munir and U. Anselmi-Tamburini: Materials Science Report, North-Holland, Amsterdam, 1989, vol. 3, p. 277.
7. Z.A. Munir: Ceramic Bull., 1988, vol. 67, pp. 342–49.
8. J. Lis, Y. Miyamoto, R. Pampuch, and K. Tanihata: Mater. Lett., 1995, vol. 22, pp. 163–68.10.1016/0167-577X(94)00246-0 ↗
9. C. Racault, F. Langlais, and R. Naslain: J. Mater. Sci., 1994, vol. 30, pp. 3384–92.10.1007/BF00352037 ↗
10. F.A. Feng, T. Orling, and Z.A. Munir: J. Mater. Res., 1999, vol. 14 (3), pp. 925–39.10.1557/JMR.1999.0124 ↗
11. X. Tong, T. Okano, T. Iseki, and T. Yano: J. Mater. Sci., 1995, vol. 30, pp. 3087–90.10.1007/BF01209221 ↗
12. M.W. Barsoum, T. El-Raghy, and L.U.J.T. Ogbuji: J. Electrochem. Soc., 1997, vol. 144, pp. 2508–16.10.1149/1.1837846 ↗
13. T. Okano, T. Yano, and T. Iseki: Trans. Met. Soc. Jpn., 1993, vol. 14A, p. 597.
14. P.J. Counihan, A. Crawford, and N.N. Thadhani: Mater. Sci. Eng. A, 1999, vol. A267, pp. 26–35.10.1016/S0921-5093(99)00056-8 ↗
15. J.B. Holt and Z.A. Munir: J. Mater. Sci., 1986, vol. 21, pp. 251–59.10.1007/BF01144729 ↗
16. B. Pieraggi: Oxid. Met., 1987, vol. 27, pp. 177–85.10.1007/BF00667057 ↗
17. A.M. Chaze and C. Coddet: Oxid. Met., 1987, vol. 28, pp. 61–71.10.1007/BF00666471 ↗
18. P. Kofstad: High Temperature Oxidation of Metals, Wiley, New York, NY, 1966.
19. B.E. Deal and A.S. Grove: J. Appl. Phys., 1965, vol. 36, pp. 3770–78.10.1063/1.1713945 ↗