Variation in the Chemical Driving Force for Intragranular Nucleation in the Multi-pass Weld Metal of Ti-Containing High-Strength Low-Alloy Steel
Source abstract
Abstract
The variation of the Mn-depleted zone (MDZ) around the inclusion during multi-pass welding of Ti-containing high-strength low-alloy (HSLA) steel was investigated by taking the changes in the impact toughness and microstructure into account. As-deposited weld metal specimens were prepared by single-pass, bead-in-groove welding, and reheated weld metal specimens were obtained by a thermal simulation technique. Two types of chemical compositions were prepared, mainly by controlling the Ti content in order to form two types of phases at inclusion/matrix interface: spinel and ilmenite. When the reheating thermal cycle is applied to the as-deposited weld metal, the MDZ depth varied depending on the inclusion surface phase; this could be explained by the competition of the homogenization effect and the dissolution effect, which occurred near the inclusion/matrix interface. In order to enhance the chemical driving force for intragranular nucleation in both as-deposited weld metal and reheated weld metal, the formation of ilmenite phase is recommended.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. W.W. BoseFilho, A.L.M. Carvalho, and P. Bowen: Mater. Sci. Eng. A, 2007, vol. 460–461, pp. 436–52.10.1016/j.msea.2007.01.115 ↗
2. W.M. Garrison, Jr. and A.L. Wojcieszynski: Mat. Sci. Eng. A-Struct., 2007, vol. 464, pp. 321-29.10.1016/j.msea.2007.02.015 ↗
3. E. Levine and D.C. Hill: Metall. Trans. A, 1977, vol. 8A, pp. 1453-63.10.1007/BF02642859 ↗
4. J.-S. Byun, J.-H. Shim, J.-Y. Suh, Y.-J. Oh, Y.W. Cho, J.-D. Shim and D.N. Lee: Mat. Sci. Eng. A-Struct., 2001, vol. 319-321, pp. 326-31.10.1016/S0921-5093(00)02014-1 ↗
5. R.A. Ricks, P.R. Howell and G.S. Barritte: J. Mater. Sci., 1982, vol. 17, pp. 732-40.10.1007/BF00540369 ↗
6. S. St-Laurent and G. L’Espérance: Mat. Sci. Eng. A-Struct., 1992, vol. 149, pp. 203-16.10.1016/0921-5093(92)90381-A ↗
7. R.A. Farrar, Z. Zhang and S.R. Bannister: J. Mater. Sci., 1993, vol. 28, pp. 1385-90.10.1007/BF01191982 ↗
8. T.-K. Lee, H.J. Kim, B.Y. Kang and S.K. Hwang: ISIJ Int., 2000, vol. 40, pp. 1260-68.10.2355/isijinternational.40.1260 ↗
9. K.-T. Park, S.W. Hwang, J.H. Ji and C.H. Lee: Met. Mater. Int., 2011, vol. 17, pp. 349-56.10.1007/s12540-011-0425-4 ↗
10. K. Yamamoto, T. Hasegawa and J. Takamura: ISIJ Int., 1996, vol. 36, pp. 80-86.10.2355/isijinternational.36.80 ↗
11. S. Kim, Y. Kang and C. Lee: Mat. Sci. Eng. A-Struct., 2013, vol. 559, pp. 178-86.10.1016/j.msea.2012.08.072 ↗
12. J.M. Gregg and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1603-11.10.1007/BF02668526 ↗
13. Ø. Grong, A.O. Kluken, H.K. Nylund, A.L. Dons and J. Hjelen: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 525-34.10.1007/BF02663903 ↗
14. I. Madariaga and I. Gutiérrez: Acta Mater., 1999, vol. 47, pp. 951-60.10.1016/S1359-6454(98)00388-7 ↗
15. T. Yamada, H. Terasaki and Y. Komizo: ISIJ Int., 2009, vol. 49, pp. 1059-62.10.2355/isijinternational.49.1059 ↗
16. S. Aihara, G. Shigesato, M. Sugiyama, and R. Uemori: Nippon Steel Technical Report No. 91, 2005, pp. 43–48.
17. J.-H. Shim, Y.W. Cho, S.H. Chung, J.-D. Shim and D.N. Lee: Acta Mater., 1999, vol. 47, pp. 2751-60.10.1016/S1359-6454(99)00114-7 ↗
18. J.-H. Shim, J.-S. Byun, Y.W. Cho, Y.-J. Oh, J.-D. Shim and D.N. Lee: Scripta Mater., 2001, vol. 44, pp. 49-54.10.1016/S1359-6462(00)00560-1 ↗
19. J.-H. Shim, Y.-J. Oh, J.-Y. Suh, Y.W. Cho, J.-D. Shim, J.-S. Byun and D.N. Lee: Acta Mater., 2001, vol. 49, pp. 2115-22.10.1016/S1359-6454(01)00134-3 ↗
20. J.-S. Byun, J.-H. Shim, Y.W. Cho and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 1593-1606.10.1016/S1359-6454(02)00560-8 ↗
21. J.S. Seo, H.J. Kim and C. Lee: ISIJ Int., 2013, vol. 53, pp. 880-86.10.2355/isijinternational.53.880 ↗
22. Y. Kang, J. Jang, J.H. Park and C. Lee: Met. Mater. Int., 2014, vol. 20, pp. 119-27.10.1007/s12540-014-1013-1 ↗
23. Y. Kang, K. Han, J.H. Park and C. Lee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4753-57.10.1007/s11661-014-2470-3 ↗
24. M. Enomoto: Met. Mater., 1998, vol. 4, pp. 115-23.10.1007/BF03026028 ↗
25. T. Pan, Z. Yang, B. Bai and H. Fang: Acta. Metall. Sinica., 2003, vol. 39, pp. 1037-42.
26. J.R. Yang and H.K.D.H. Bhadeshia: J. Mater. Sci., 1991, vol. 26, pp. 839-45.10.1007/BF00588325 ↗
27. S.S. Babu and H.K.D.H. Bhadeshia: Mater. Trans. JIM, 1991, vol. 32, pp. 679-88.10.2320/matertrans1989.32.679 ↗
28. G.I. Rees and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1994, vol. 10, pp. 353-58.10.1179/mst.1994.10.5.353 ↗
29. G. Thewlis, J.A. Whiteman and D.J. Senogles: Mater. Sci. Technol., 1997, vol. 13, pp. 257-74.10.1179/mst.1997.13.3.257 ↗
30. J.R. Yang and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1989, vol. 5, pp. 93-97.10.1179/mst.1989.5.1.93 ↗
31. G. Miyamoto, T. Shinyoshi, J. Yamaguchi, T. Furuhara, T. Maki and R. Uemori: Scripta Mater., 2003, vol. 48, pp. 371-77.10.1016/S1359-6462(02)00451-7 ↗
32. M. Strangwood and H.K.D.H. Bhadeshia: Proceedings of the Conference on Advances in Welding Science and Technology, ASM International, Materials Park, OH, 1987, pp. 187–91.
33. M. Strangwood: Ph.D. Thesis, University of Cambridge, Cambridge, U.K., 1987.
34. Y.M. Kim, H. Lee and N.J. Kim: Mat. Sci. Eng. A-Struct., 2008, vol. 478, pp. 361-70.10.1016/j.msea.2007.06.035 ↗
35. S.S. Babu: Curr. Opin. Solid St. M., 2004, vol. 8, pp. 267-78.10.1016/j.cossms.2004.10.001 ↗
36. C.H. Lee, H.K.D.H. Bhadeshia and H.-C. Lee: Mat. Sci. Eng. A-Struct., 2003, vol. 360, pp. 249-57.10.1016/S0921-5093(03)00477-5 ↗
37. G.M. Evans: Weld. J., 1982, vol. 61, pp. 125s-132s.
38. G.M. Evans: IIW Doc. II-A-460-78.
39. E. Surian, J. Trotti, A. Cassanelli and L.A. de Vedia: Weld. J., 1994, vol. 73, pp. 45s-53s.
40. E. Surian, M. Ramini de Rissone and L. de Vedia: Weld. J., 2005, vol. 84, pp. 53s-62s.
41. M.H. Avazkonandeh-Gharavol, M. Haddad-Sabzevar and A. Haerian: J. Mater. Sci., 2009, vol. 44, pp. 186-97.10.1007/s10853-008-3103-2 ↗
42. J.H. Chen, T.D. Xia and C. Yan: Weld. J., 1993, vol. 72, pp. 19s-27s.
43. Z.L. Zhou and S.H. Liu: Acta. Metall. Sinica, 1998, vol. 11, pp. 87-92.
44. W.W. Bose-Filho, A.L.M. Carvalho and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 29-39.10.1016/j.matchar.2006.03.004 ↗
45. K. Easterling: Introduction to the physical metallurgy of welding, p. 20, Butterworth, London, 1983.
46. A.-F. Gourgues, H.M. Flower and T.C. Lindley: Mater. Sci. Technol., 2000, vol. 16, pp. 26-40.10.1179/026708300773002636 ↗
47. J.S. Park, C. Lee and J.H. Park: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 1550-64.10.1007/s11663-012-9734-3 ↗
48. A. Hasegawa, K. Morita and N. Sano: Tetsu-to-Hagané, 1995, vol. 81, pp. 1109-13.10.2355/tetsutohagane1955.81.12_1109 ↗
49. M. Wakoh, T. Sawai and S. Mizoguchi: ISIJ Int., 1996, vol. 36, pp. 1014-21.10.2355/isijinternational.36.1014 ↗
50. Y.-B. Kang and H.-G. Lee: ISIJ Int., 2010, vol. 50, pp. 501-08.10.2355/isijinternational.50.501 ↗
51. D.A. Porter, K.E. Easterling and M.Y. Sherif: Phase transformations in metals and alloys, p. 90, CRC Press, New York, 2009.
52. R. Ciach, B. Dukiet-Zawadzka and T.D. Ciach: J. Mater. Sci., 1978, vol. 13, pp. 2676-86.10.1007/BF02402755 ↗
53. W.C. Leslie: The physical metallurgy of steels, p. 176, McGraw-Hill, New York, 1982.