Influence of Temperature on Fatigue-Induced Martensitic Phase Transformation in a Metastable CrMnNi-Steel
Source abstract
Abstract
Metastable austenitic steels can exhibit a fatigue-induced martensitic phase transformation during cyclic loading. It is generally agreed that a certain strain amplitude and a threshold of the cumulated plastic strain must be exceeded to trigger martensitic phase transformation under cyclic loading. With respect to monotonic loading, the martensitic phase transformation takes place up to a critical temperature—the so-called M d temperature. The goal of the present investigation is to determine an M d,c temperature which would be the highest temperature at which a fatigue-induced martensitic phase transformation can take place. For this purpose, fatigue tests controlled by the total strain were performed at different temperatures. The material investigated was a high-alloy metastable austenitic steel X3CrMnNi16.7.7 (16.3Cr-7.2Mn-6.6Ni-0.03C-0.09N-1.0Si) produced using the hot pressing technique. The temperatures were set in the range of 283 K (10 °C) ≤ T ≤ 473 K (200 °C). Depending on the temperature and strain amplitude, the onset of the martensitic phase transformation shifted to different values of the cumulated plastic strain, or was inhibited completely. Moreover, it is known that metastable austenitic CrMnNi steels with higher nickel contents can exhibit the deformation-induced twinning effect. Thus, at higher temperatures and strain amplitudes, a transition from the deformation-induced martensitic transformation to deformation-induced twinning takes place. The fatigue-induced martensitic phase transformation was monitored during cyclic loading using a ferrite sensor. The microstructure after the fatigue tests was examined using the back-scattered electrons, the electron channeling contrast imaging and the electron backscatter diffraction techniques to study the temperature-dependent dislocation structures and phase transformations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. F. Lecroisey, A. Pineau: Metall. Trans., 1972, vol. 3, pp. 387-396.10.1007/BF02642042 ↗
2. L. Remy: Thesis, 1976, Université d’Orsay, Paris.
3. L. Remy, A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99-107.10.1016/0025-5416(77)90093-3 ↗
4. K. Sato, M. Ichinose, Y. Hirotsu, Y. Inoue: ISIJ Int., 1989, vol. 29, pp. 868-877.10.2355/isijinternational.29.868 ↗
5. S. Allain, J.-P. Chateau, O. Bouaziz, S. Migot, N. Guelton: Mater. Sci. Eng. A, 2004, vols. 387-389, pp. 158-162.10.1016/j.msea.2004.01.059 ↗
6. H. Bhadeshia, R. Honeycombe (2006) Steels Microstructure and Properties, Amsterdam: Elsevier.
7. L. Remy, A. Pineau: Mater. Sci. Eng., 1978, vol. 36, pp. 47-63.10.1016/0025-5416(78)90194-5 ↗
8. P.C.J. Gallagher: Metal. Trans., 1970, vol. 1, pp. 2429-2461.10.1007/BF03038370 ↗
9. V. Zackay, E. Parker, D. Fahr, R. Busch: Transaction of the American Society for Metals, 1967, vol. 60, pp. 252-259.
10. O. Grässel, G. Frommeyer, C. Derber, H. Hofmann: J. Phys. IV, 1997, vol. 7, pp. 383-388.
11. O. Grässel, L. Krüger, G. Frommeyer, L. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391-1409.10.1016/S0749-6419(00)00015-2 ↗
12. S. Martin, C. Ullrich, D. Šimek, U. Martin, D. Rafaja: J. Appl. Cryst., 2011, vol. 44, pp. 779-787.10.1107/S0021889811019558 ↗
13. L. Remy, A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 99-107.10.1016/0025-5416(77)90093-3 ↗
14. S. Martin, S. Wolf, U. Martin, L. Krüger: Solid State Phenom., 2011, vol. 172-174, pp. 172-177.10.4028/www.scientific.net/SSP.172-174.172 ↗
15. A. Vinogradov, A. Lazarev, M. Linderov, A. Weidner, H. Biermann: Acta Mater., 2013, vol. 61, pp. 2434-2449.10.1016/j.actamat.2013.01.016 ↗
16. K. Tsuzaki, T. Maki, I. Tamura: J. Phys., (1982) 43: 2–7
17. K. Tsuzaki, E. Nakanishi, T. Maki, I. Tamura: Trans. ISIJ, 1983, vol. 23, pp. 834-841.10.2355/isijinternational1966.23.834 ↗
18. G. Baudry, A. Pineau: Mater. Sci. Eng., 1977, vol. 28, pp. 229-242.10.1016/0025-5416(77)90176-8 ↗
19. U. Krupp, C. West, H.-J. Christ: Mater. Sci. Eng. A, 2008, vol. 481-482, pp. 713-717.10.1016/j.msea.2006.12.211 ↗
20. M. Bayerlein, H.-J. Christ, H. Mughrabi: Mater. Sci. Eng. A, 1989, vol. 114, pp. L11-L16.10.1016/0921-5093(89)90871-X ↗
21. M. Bayerlein, H. Mughrabi, M. Kesten, B. Meier: Mater. Sci. Eng. A, 1992, vol. 159, pp. 35-41.10.1016/0921-5093(92)90396-I ↗
22. M. Smaga, F. Walther, D. Eifler: Int. J. Mat. Res., 2006, vol. 97, pp. 1648-1655.10.3139/146.101396 ↗
23. M. Smaga, F. Walther, D. Eifler: Mater. Sci. Eng. A, 2008, vol. 483-484, pp. 394-397.10.1016/j.msea.2006.09.140 ↗
24. F. Hahnenberger, M. Smaga, D. Eifler: Procedia Eng., 2011, vol. 10, pp. 625-630.10.1016/j.proeng.2011.04.104 ↗
25. F. Hahnenberger, M. Smaga, D. Eifler: Adv. Eng. Mater., 2012, vol. 14, pp. 853-858.10.1002/adem.201100341 ↗
26. F. Hahnenberger, M. Smaga, and D. Eifler: Int. J. Fatigue., 2012, DOI:10.1016/j.ijfatigue.2012.07.004.10.1016/j.ijfatigue.2012.07.004 ↗
27. G. Franke, C. Altstetter: Metall. Trans. A, 1976, vol. 7A, pp. 1719-1727.10.1007/BF02817890 ↗
28. D. Hennessy, G. Steckel, C. Altstetter: Metall. Trans. A, 1976, vol. 7, pp. 415-424.10.1007/BF02642838 ↗
29. A. Glage, C. Weigelt, J. Räthel, H. Biermann: Adv. Eng. Mater., 2013, vol. 15, pp. 550-557.10.1002/adem.201200334 ↗
30. H.J. Maier, B. Donth, M. Bayerlein, H. Mughrabi, B. Meier, M. Kesten: Z. Metallkd., 1993, vol. 84, pp. 820-826.
31. G.B. Olson, R. Chait, M. Azrin, R.A. Gagne: Metall. Trans. A, 1980, vol. 11A, pp. 1069-1071.10.1007/BF02654722 ↗
32. G.R. Chanani, S.D. Antolovich: Metall. Trans., 1974, vol. 5, pp. 217-229.10.1007/BF02642945 ↗
33. A. Jahn, A. Kovalev, A. Weiß, P. R. Scheller: Steel Res. Int., 2011, vol. 82, pp. 1108-1112.10.1002/srin.201100063 ↗
34. A. Weiss, H. Gutte, M. Radtke, and P. Scheller: Patent Specification WO 2008/009722 A1.
35. T. Angel: J. Iron Steel Inst. 177: 165-174 (1954).
36. Q.-X. Dai, A.-D. Wang, X.-N. Cheng, X.-M. Luo: Chinese Phys., 2002, vol. 11, pp. 596-600.10.1088/1009-1963/11/6/315 ↗
37. J. Talonen, P. Aspegren, H. Hänninen: Mater. Sci. Technol., 2004, vol. 20, pp. 1506-1512.10.1179/026708304X4367 ↗
38. D. Rafaja, C. Krbetschek, C. Ullrich, S. Martin: J. Appl. Cryst., 2014, vol. 47, pp. 936-947.10.1107/S1600576714007109 ↗
39. L. Krüger, S. Wolf, U. Martin, S. Martin, P.R. Scheller, A. Jahn, and A. Weiß: J. Phys. Conf. Ser., J. Phys. Conf. Ser., vol. 240, p. 012098, DOI:10.1088/1742-6596/240/1/012098.10.1088/1742-6596/240/1/012098 ↗
40. A.S. Hamada, L.P. Karjalainen, R.D.K. Misra, J. Talonen: Mater. Sci. Eng. A, 2013, vol. 559, pp. 336-344.10.1016/j.msea.2012.08.108 ↗
41. J. Talonen: Doctoral Thesis, Helsinki University of Technology, 2007.
42. Y. Tomita, T. Iwamoto: Int. J. Mech. Sci., 2001, vol. 43, pp. 2017-2034.10.1016/S0020-7403(01)00026-1 ↗
43. A. Niesłony, C. el Dsoki, H. Kaufmann, P. Krug: Int. J. Fatigue, 2008, vol. 30, pp. 1967-1977.10.1016/j.ijfatigue.2008.01.012 ↗
44. N.J. Hurd: Mater. Sci. Technol., 1988, vol. 4, pp. 513-517.10.1179/mst.1988.4.6.513 ↗
45. A. Glage: Doctoral Thesis, Technische Universität Bergakademie Freiberg, 2014.