journal article·2012-12

Modeling of the Effect of Temperature, Frequency, and Phase Transformations on the Viscoelastic Properties of AA 7075-T6 and AA 2024-T3 Aluminum Alloys

Jose I. Rojas, Daniel Crespo

Publisher page

Abstract

The viscoelastic response of commercial aluminum alloys 7075-T6 and 2024-T3 as a function of temperature is presented. Experimental data are obtained with a dynamic-mechanical analyzer (DMA) at different loading frequencies and compared with the available transmission electron microscopy (TEM) and differential scanning calorimetry (DSC) data. The effect of successive microstructural transformations (particle precipitation and redissolution) is revealed. An ana- lytical model is developed, which fits the mechanical response up to 573 K (300 C). The model takes into account the concentration of Guinier-Preston Zones (GPZ) and metastable precipi- tates ( g ¢ in AA 7075-T6 and h ¢ /S ¢ in AA 2024-T3), allowing us to determine the kinetic parameters of these transformations. The activation energies were previously obtained by sev- eral authors from DSC measurements and other techniques, showing considerable dispersion. The presented data, obtained with a completely different technique, allow us to reduce the uncertainty on these data and show the potential of DMA measurements in the study of microstructural transformations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. A.S. Nowick and B.S. Berry: Anelastic Relaxation in Crystalline Solids, Academic Press, New York, NY, 1972.
2. Y.M. Soifer, N.P. Kobelev, L.G. Brodova, A.N. Mannkhin, E. Korin, and L. Soifer: Nanostruct. Mater., 1999, vol. 12, pp. 875–78.10.1016/S0965-9773(99)00256-1 ↗
3. S. Abis, M. Massazza, P. Mengucci, and G. Riontino: Scripta Mater., 2001, vol. 45, pp. 685–91.10.1016/S1359-6462(01)01080-6 ↗
4. G. Bierwagen: J. Coat. Technol., 2001, vol. 73, pp. 45–52.10.1007/BF02730030 ↗
5. A.J. Vreugdenhil, V.N. Balbyshev, and M.S. Donley: J. Coat. Technol., 2001, vol. 73, pp. 35–43.10.1007/BF02730029 ↗
6. R.M. Chlistovsky, P.J. Heffernan, and D.L. DuQuesnay: Int. J. Fatigue, 2007, vol. 29, pp. 1941–49.10.1016/j.ijfatigue.2007.01.010 ↗
7. E.A. Starke and J.T. Staley: Prog. Aerosp. Sci., 1996, vol. 32, pp. 131–72.10.1016/0376-0421(95)00004-6 ↗
8. R. Ferragut, A. Somoza, and A. Dupasquier: J. Phys. Condens. Matter, 1996, vol. 8, pp. 8945–52.10.1088/0953-8984/8/45/026 ↗
9. T. Engdahl, V. Hansen, P.J. Warren, and K. Stiller: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2002, vol. 327, pp. 59–64.10.1016/S0921-5093(01)01876-7 ↗
10. C.E. Macchi, A. Somoza, A. Dupasquier, and I.J. Polmear: Acta Mater., 2003, vol. 51, pp. 5151–58.10.1016/S1359-6454(03)00364-1 ↗
11. F. Viana, A.M.P. Pinto, H.M.C. Santos, and A.B. Lopes: J. Mater. Process. Technol., 1999, vol. 93, pp. 54–59.10.1016/S0924-0136(99)00219-8 ↗
12. G.W. Smith: Thermochim. Acta, 1998, vol. 317, pp. 7–23.10.1016/S0040-6031(98)00361-X ↗
13. S. Abis, P. Mengucci, and G. Riontino: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 1996, vol. 214, pp. 153–60.10.1016/0921-5093(96)10259-8 ↗
14. C. Badini, F. Marino, and E. Verne: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 1995, vol. 191, pp. 185–91.10.1016/0921-5093(94)09637-C ↗
15. A.K. Jena, A.K. Gupta, and M.C. Chatuverdi: Acta Metall., 1989, vol. 37, pp. 885–95.10.1016/0001-6160(89)90015-1 ↗
16. T.J. Konno, M. Kawasaki, and K. Hiraga: J. Electron Microsc., 2001, vol. 50, pp. 105–11.10.1093/jmicro/50.2.105 ↗
17. J.I. Gersten and F.W. Smith: The Physics and Chemistry of Materials, 1st ed., Wiley, New York, NY, 2001, pp. 757–67.
18. J.W. Christian: The Theory of Transformations in Metals and Alloys, 3rd ed., Pergamon, Oxford, U.K., 2002, pp. 532–46.
19. M.J. Starink and A.M. Zahra: Thermochim. Acta, 1997, vol. 292, pp. 159–68.10.1016/S0040-6031(96)03135-8 ↗
20. J.M. Papazian: Metall. Trans. A, 1982, vol. 13A, pp. 761–69.10.1007/BF02642389 ↗
21. S. Yannacopoulos, S.O. Kasap, A. Hedayat, and A. Verma: Can. Metall. Q., 1994, vol. 33, pp. 51–60.10.1179/000844394795539343 ↗
22. U. Batra and S.R. Prabhakar: Trans. Indian Inst. Met., 1995, vol. 48, pp. 55–61.
23. E.S. Tankins and W.E. Frazier: Mater. Perform., 1987, vol. 26, pp. 37–44.
24. M.J. Starink and P. Vanmourik: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 1992, vol. 156, pp. 183–94.10.1016/0921-5093(92)90150-Y ↗
25. H.I. Aaronson and C. Laird: Trans. TMS-AIME, 1968, vol. 242, p. 1437.
26. Y.H. Chen and R.D. Doherty: Scripta Metall., 1977, vol. 11, pp. 725–29.10.1016/0036-9748(77)90065-5 ↗
27. J.I. Rojas, A. Aguiar, and D. Crespo: Phys. Status Solidi C, 2011, vol. 8, pp. 3111–14.10.1002/pssc.201000732 ↗
28. T. Das, S. Bandyopadhyay, and S. Blairs: J. Mater. Sci., 1994, vol. 29, pp. 5680–88.10.1007/BF00349964 ↗
29. P.M. Sutton: Phys. Rev., 1953, vol. 91, pp. 816–21.10.1103/PhysRev.91.816 ↗
30. G.N. Kamm and G.A. Alers: J. Appl. Phys., 1964, vol. 35, pp. 327–30.10.1063/1.1713309 ↗
31. J.A. Brammer and C.M. Percival: Exp. Mech., 1970, vol. 10, p. 245.10.1007/BF02324097 ↗
32. Y.P. Varshni: Phys. Rev. B, 1970, vol. 2, pp. 3952–58.10.1103/PhysRevB.2.3952 ↗
33. A. Wolfenden and J.M. Wolla: J. Mater. Sci., 1989, vol. 24, pp. 3205–12.10.1007/BF01139042 ↗
34. T. Ozawa: Thermochim. Acta, 1992, vol. 203, pp. 159–65.10.1016/0040-6031(92)85192-X ↗
35. R. Graf, I.J. Polmear, and G. Thomas: J. Inst. Met., 1958, vol. 86, pp. 535–38.
36. V. Hansen, K. Stiller, and G. Waterloo: Mater. Sci. Forum, 2002, vols. 396–402, pp. 815–20.10.4028/www.scientific.net/MSF.396-402.815 ↗
37. E. Salamci: Mater. Sci. Technol., 2004, vol. 20, pp. 859–63.10.1179/026708304225010433 ↗
38. J.M. Papazian: Mater. Sci. Eng., 1986, vol. 79, pp. 97–104.10.1016/0025-5416(86)90391-5 ↗
39. J.M. Badia, J.M. Antoranz, and P. Tarin: Boletín Sociedad Española Cerámica Vidrio, 2004, vol. 43, pp. 224–28.10.3989/cyv.2004.v43.i2.508 ↗
40. A. Charai, T. Walther, and C. Alfonso: Acta Mater., 2000, vol. 48, pp. 2751–64.10.1016/S1359-6454(99)00422-X ↗
41. H.C. Shih, N.J. Ho, and J.C. Huang: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2479–94.10.1007/BF02652342 ↗
42. E.J. Mittemeijer: J. Mater. Sci., 1992, vol. 27, pp. 3977–87.10.1007/BF01105093 ↗
43. V. Dixit, R.S. Mishra, R.J. Lederich, and R. Talwar: Sci. Technol. Weld. Joi., 2009, vol. 14, pp. 346–55.10.1179/136217109X415910 ↗
44. E. Hersent, J.H. Driver, and D. Piot: Scripta Mater., 2010, vol. 62, pp. 455–57.10.1016/j.scriptamat.2009.12.009 ↗
45. MATLAB: The MathWorks Inc., R2010b, Natick, MA, 2010.
46. J.K. Park and A.J. Ardell: Metall. Trans. A, 1983, vol. 14A, pp. 1957–65.10.1007/BF02662363 ↗
47. M.M. Sharma, M.F. Amateaub, and T.J. Eden: J. Alloy. Compd., 2006, vol. 416, pp. 135–42.10.1016/j.jallcom.2005.08.045 ↗
48. H.T. Jeong, E. Fleury, W.T. Kim, D.H. Kim, and K. Hono: J. Phys. Soc. Jpn, 2004, vol. 73, pp. 3192–97.10.1143/JPSJ.73.3192 ↗
49. Y. Du, Y.A. Chang, B.Y. Huang, W.P. Gong, Z.P. Jin, H.H. Xu, Z.H. Yuan, Y. Liu, Y.H. He, and F.Y. Xie: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2003, vol. 363, pp. 140–51.10.1016/S0921-5093(03)00624-5 ↗
50. S.K. Maloney, K. Hono, I.J. Polmear, and S.P. Ringer: Micron, 2001, vol. 32, pp. 741–47.10.1016/S0968-4328(00)00081-0 ↗
51. M. De Sanctis: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 1991, vol. 141, pp. 103–21.10.1016/0921-5093(91)90714-X ↗