journal article·2004-09

Effect of dissolved tungsten on the deformation of 70Ni-30Fe alloys

K. E. Knipling, G. Zeman, J. S. Marte, S. M. Kelly, S. L. Kampe

Publisher page

Abstract

A series of Ni-Fe alloys containing various levels of tungsten in solid solution have been prepared as a means to assess the influence of solid solution strengthening on the mechanical behavior of monolithic 70Ni-30Fe. In particular, 70Ni-30Fe alloys plus equilibrium concentrations of tungsten in solid solution nominally correspond to the compositions associated with the matrix-only portion of certain tungsten heavy alloys, that is, alloys comprised of a high volume fraction of nominally pure tungsten particles embedded within a minority Ni-Fe-W based matrix. The study shows that the working solubility of tungsten within the 70Ni-30Fe base composition increases slightly with temperature, from approximately 21 wt pct at room temperature to approximately 23 wt pct at 1400 °C. Increasing the level of tungsten in solid solution leads to increases in room-temperature yield strength, tensile strength, and ductility. In contrast, the deformation characteristics of the alloys, as quantified by the power-law work-hardening exponent, n, and the strain-rate-sensitivity exponent, m, show little variation with tungsten solute concentration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. B.H. Rabin, A. Bose, and R.M. German: Int. J. Powder Metall., 1989, vol. 25 (1), pp. 21–27.
2. B.H. Rabin and R.M. German: Metall. Trans. A, 1988, vol. 19A, pp. 1523–32.10.1007/BF02674026 ↗
3. S.G. Caldwell: Tungsten and Tungsten Alloys—1992, A. Bose and R.J. Dowding, eds., MPIF, Princeton, NJ, 1992, pp. 89–96.
4. Y.H. Chiou, Y.S. Zu. and S.T. Lin: J. Mater. Sci., 1996, vol. 31, pp. 4039–46.10.1007/BF00352666 ↗
5. J.R. Spencer and J.A. Mullendore: Tungsten and Tungsten Alloys—1992, A. Bose and R.J. Dowding, eds., MPIF, Princeton, NJ, 1992, pp. 111–18.
6. L.B. Ekbom, U. Lindegran, and J.-E. Andersson: Int. J. Refractory Hard Met., 1988, vol. 7 (4), pp. 210–14.
7. L. Ekbom: Scand. J. Metall., 1988, vol. 17, pp. 84–89.
8. R.S. Coates and K.T. Ramesh: Mater. Sci. Eng., 1991, vol. A145, pp. 159–66.10.1016/0921-5093(91)90245-I ↗
9. A. Bose: in Tungsten and Refractory Metals—1994, Proc. 2nd Int. Conf. on Tungsten and Refractory Metals, McLean, VA, Oct. 17–19, 1994, MPIF/APMI, Princeton, NJ, 1994, pp. 21–33.
10. R. Gero, L. Borukhin, and I. Pikus: Mater. Sci. Eng., 2001, vol. A302, pp. 162–67.10.1016/S0921-5093(00)01369-1 ↗
11. R.L. Woodward, I.G. McDonald, and A. Gunner: J. Mater. Sci. Lett., 1986, vol. 5, pp. 413–14.10.1007/BF01672345 ↗
12. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, Boston, MA, 1986, p. 288.
13. ASTM E92-82, “Standard Test Method for Vickers Hardness of Metallic Materials,” Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1982, vol. 03.01, pp. 208–16.
14. R.V. Minakova, N.A. Strochak, P.A. Verkhovodov, L.G. Bazhenova, and V.L. Poltoratskaya: Sov. Powder Met. Metal Ceram., 1980, vol. 19, pp. 842–46.10.1007/BF00791001 ↗
15. M.A. Meyers and J.R.C. Guimaraes: Metalurgia-ABM, 1978, vol. 34, p. 707.
16. M.A. Meyers and K.K. Chawla: Mechanical Metallurgy Principles and Applications, Prentice-Hall, Englewood Cliffs, NJ, 1984, p. 398.
17. R.J. Dowding and K.J. Tauer: Scripta Metall. Mater., 1991, vol. 25 (1), pp. 121–25.10.1016/0956-716X(91)90365-8 ↗
18. M. Yodogawa: Sintering Theory and Practice, Elsevier, New York, NY, 1982, vol. 14, p. 519.
19. M. Zhou, A. Needleman, and R.J. Clifton: J. Mech. Phys. Solids, vol. 42, 1994, pp. 423–58.10.1016/0022-5096(94)90026-4 ↗