An Atom-Probe Tomographic Study of Arc Welds in a Multi-Component High-Strength Low-Alloy Steel
Source abstract
Abstract
An experimental plate steel with the composition Fe-1.39Cu-2.7Ni-0.58Al-0.48Mn-0.48Si-0.065Nb-0.05C (wt pct) or alternatively Fe-1.43Cu-2.61Ni-1.21Al-0.48Mn-0.98Si-0.039Nb-0.23C at. pct has been recently produced at Northwestern University for use in Naval hull and deck applications—it is designated NUCu-140. To understand the microstructural changes occurring in NUCu-140 steel after gas-metal arc welding (GMAW), a detailed study of the heat-affected and fusion zones was performed throughout the weld cross section using microhardness, metallographic, chemical, and atom-probe tomographic analyses. Local-electrode atom-probe (LEAP) tomography was employed to measure the morphology and compositions of Cu-rich precipitates from each region. The mean radius, number density, volume fraction, and compositions of the precipitates, as well as the interfacial concentration profiles, are measured. The Cu precipitates dissolve partially from the heat-affected zone (HAZ) thermal cycle, and freshly formed sub-nanometer radius Cu-rich precipitates nucleate in both the HAZ and fusion zone (FZ) during cooling; however, the precipitation of Cu during cooling in the HAZ and FZ is not sufficient to restore the lost strength. The precipitation in the FZ is reduced compared to the HAZ due to a mismatched Cu composition of the weld. Multi-pass welding is suggested to restore strength in the GMAW sample by promoting Cu precipitate nucleation and growth in the HAZ and FZ.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. P.J. Konkol, K.M. Stefanick, G.S. Pike (2011) Weld J 90(2):34-41.
2. R.P. Kolli, R.M. Wojes, S. Zaucha, D.N. Seidman (2008) Int. J. Mater. Res. 99(5): 513-527.10.3139/146.101662 ↗
3. S. Vaynman, D. Isheim, R.P. Kolli, S.P. Bhat, D.N. Seidman and M.E. Fine: Metall. Mater. Trans. A, 2008, Vol. 39A, pp 363-373.10.1007/s11661-007-9417-x ↗
4. D. Isheim, R.P. Kolli, M.E. Fine and D.N. Seidman: Scripta Mater., 2006, Iss. 1, Vol. 55, pp 35-40.10.1016/j.scriptamat.2006.02.040 ↗
5. M.S. Gagliano and M.E. Fine: CALPHAD: Comput. Coupling Phase Diagrams Thermochem., 2001, Iss. 2, Vol. 25, pp 207-216.10.1016/S0364-5916(01)00043-8 ↗
6. M.S. Gagliano and M.E. Fine: CALPHAD: Comput. Coupling Phase Diagrams Thermochem., 2004, Iss. 8, Vol. 35A, pp 2323-2329.
7. S. Vaynman, M.E. Fine, S.P. Bhat (2004) Proceedings from the Materials Science and Technology 2004 Conference. AIST and TMS, Warrendale, PA, pp. 417-421.
8. S. Vaynman, M.E. Fine, C. Hahin, N. Biondolillo and C. Crosby: Modern Steel Const., March, 2007.
9. S. Vaynman, M.E. Fine, R.I. Asfahani, D.M. Bormet, C. Hahin (2002) Microalloyed Steels 2002-Proceedings from the Materials Solutions Conference 2002. ASM International, Columbus, OH, pp. 43-48.
10. S. Vaynman and M.E. Fine, International Symposium on Steel for Fabricated Structures, AIST and ASM Int., Cincinnati, OH, 1999, pp. 59-66.
11. S. Vaynman, I.J. Uslander and M.E. Fine, 39th Mechanical Working and Steel Processing Conference Proceedings, ISS, Indianapolis, IN, 1997, pp. 1183-119.
12. S. Vaynman, M.E. Fine, G. Ghosh and S.P. Bhat, “Materials for the New Millennium” Proceedings of the Fourth Materials Engineering Conference, ASCE, New York, NY, 1996, pp. 1551-1560.
13. G. Krauss: Steels : Processing, Structure, and Performance, ASM International, Materials Park, Ohio, 2005, pp. 385-387.
14. ASTM Standard A710-02: Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates, 2007.
15. S. Vaynman, M.E. Fine, S. Lee and H.D. Espinosa: Scripta Mater., 2006, Iss. 4, Vol. 55, pp 351-354.10.1016/j.scriptamat.2006.04.029 ↗
16. R.P. Kolli and D.N. Seidman: Acta Mater., 2008, Iss. 9, Vol. 56, pp 2073-2088.10.1016/j.actamat.2007.12.044 ↗
17. R.P. Kolli and D.N. Seidman: Microsc. microanal., 2007, Iss. 4, Vol. 13, pp 272-284.10.1017/S1431927607070675 ↗
18. R.P. Kolli, Z. Mao, D.N. Seidman and D.T. Keane: Appl. Phys. Lett., 2007, Iss. 24, Vol. 91.10.1063/1.2820378 ↗
19. R.P. Kolli: Ph.D. Thesis, 2007, Northwestern University.
20. E. Hornbogen and R.C. Glenn: Trans. Metall. Soc. AIME, 1960, Iss. 6, Vol. 218, pp 1064-1070.
21. E. Hornbogen: Acta Metall., 1962, Iss. May, Vol. 10, pp 525-533.10.1016/0001-6160(62)90197-9 ↗
22. E. Hornbogen: Acta Metall., 1962, Iss. Dec., Vol. 10, pp 1187-1189.10.1016/0001-6160(62)90174-8 ↗
23. G.M. Worrall, J.T. Buswell, C.A. English, M.G. Hetherington and G.D.W. Smith: J. Nucl. Mater., 1987, Iss. 1, Vol. 148, pp 107-114.10.1016/0022-3115(87)90525-3 ↗
24. G.R. Speich and R.A. Oriani: Trans. Metall. Soc. AIME, 1965, Iss. 4, Vol. 233, pp 623-631.
25. P.J. Othen, M.L. Jenkins, G.D.W. Smith and W.J. Phythian: Philos. Mag. Lett., 1991, Iss. 6, Vol. 64, pp 383-391.10.1080/09500839108215121 ↗
26. P.J. Othen, M.L. Jenkins and G.D.W. Smith, Proceedings of the International Conference on Martensitic Transformations, 1992, pp. 527-532.
27. P.J. Othen, M.L. Jenkins and G.D.W. Smith: Philos. Mag. A, 1994, Iss. 1, Vol. 70, pp 1-24.10.1080/01418619408242533 ↗
28. H.R. Habibi-Bajguirani and M.L. Jenkins: Philos. Mag. Lett., 1996, Iss. 4, Vol. 73, pp 155-162.10.1080/095008396180786 ↗
29. S. Lozano-Perez, M.L. Jenkins and J.M. Titchmarsh: Philos. Mag. Lett., 2006, Iss. 6, Vol. 86, pp 367-374.10.1080/09500830600815365 ↗
30. S.R. Goodman, S.S. Brenner and J.R. Low: Metall. Trans., 1973, Vol. 4, pp 2363-2369.10.1007/BF02669376 ↗
31. S.R. Goodman, S.S. Brenner and J.R. Low: Metall. Trans., 1973, Vol. 4, pp 2371-2378.10.1007/BF02669377 ↗
32. M.W. Lui and I. Lemay: Metall. Trans., 1974, Iss. 6, Vol. 5, pp 1510-1511.10.1007/BF02646641 ↗
33. A. Cerezo, C.R.M. Grovenor, M.G. Hetherington, W. Sha, B.A. Shollock and G.D.W. Smith: Mater. Charact., 1990, Iss. 1, Vol. 25, pp 143-156.10.1016/1044-5803(90)90026-G ↗
34. K. Osamura, T. Yamamoto, T. Ujihara, H. Okuda and M. Furusaka: Ann. Phys. (Paris, Fr.), 1995, Iss. 3, Vol. 20, pp 3-10.
35. S.K. Lahiri, D. Chandra, L.H. Schwartz and M.E. Fine: Trans. Metall. Soc. AIME, 1969, Iss. 9, Vol. 245, pp 1865-1868.
36. M.A. Sokolov, S. Spooner, G.R. Odette, B.D. Wirth and G.E. Lucas, 18th International Symposium on Effects of Radiation on Materials, ASTM, Hyannis, MA, 1999, pp. 333-345.10.1520/STP13873S ↗
37. J.T. Buswell, E.A. Little and R.N. Sinclair: Nucl. Energy (Br. Nucl. Energy Soc.), 1998, Iss. 6, Vol. 37, pp 387-397.
38. F. Maury, N. Lorenzelli and C.H. Denovion: J. Nucl. Mater., 1991, Iss. 3, Vol. 183, pp 217-220.10.1016/0022-3115(91)90491-O ↗
39. K. Osamura, H. Okuda, K. Asano, M. Furusaka, K. Kishida and F. Kurosawa, IX International Conference on Small Angle Scattering, Saclay, France, 1993, pp. 317-320.
40. K. Osamura, H. Okuda, M. Takashima, K. Asano, M. Furusaka (1993) Mater. Trans. JIM 34(4):305-311.10.2320/matertrans1989.34.305 ↗
41. K. Osamura, H. Okuda, S. Ochiai, M. Takashima, K. Asano, M. Furusaka, K. Kishida and F. Kurosawa: ISIJ Int., 1994, Iss. 4, Vol. 34, pp 359-365.10.2355/isijinternational.34.359 ↗
42. F. Maury, N. Lorenzelli, C.H. Denovion and P. Lagarde: Scripta Metall. Mater., 1991, Iss. 8, Vol. 25, pp 1839-1844.10.1016/0956-716X(91)90314-Q ↗
43. 43.S. Pizzini, K.J. Roberts, W.J. Phythian, C.A. English, G.N. Greaves (1990) Philos. Mag. Lett. 61(4):223-229.10.1080/09500839008202362 ↗
44. W.J. Phythian, A.J.E. Foreman, C.A. English, J.T. Buswell, M. Hetherington, K. Roberts and S. Pizzini, Effects of Radiation on Materials : 15th International Symposium, ASTM, Nashville, TN, 1992, pp. 131-150.10.1520/STP17866S ↗
45. A.B. Edwards, K.J. Roberts, S. Pizzini and W.J. Phythian: Philos. Mag. A, 1999, Iss. 6, Vol. 79, pp 1295-1319.10.1080/01418619908210362 ↗
46. P. Asoka-Kumar, B.D. Wirth, P.A. Sterne, R.H. Howell and G.R. Odette: Philos. Mag. Lett., 2002, Iss. 11, Vol. 82, pp 609-615.10.1080/0950083021000019958 ↗
47. K. Verheyen, M. Jardin and A. Almazouzi: J. Nucl. Mater., 2006, Iss. 1-3, Vol. 351, pp 209-215.10.1016/j.jnucmat.2006.02.011 ↗
48. J.J. Blackstock and G.J. Ackland: Philos. Mag. A, 2001, Iss. 9, Vol. 81, pp 2127-2148.10.1080/01418610108217139 ↗
49. T. Harry and D.J. Bacon: Acta Mater., 2002, Iss. 1, Vol. 50, pp 195-208.10.1016/S1359-6454(01)00331-7 ↗
50. T. Harry and D.J. Bacon: Acta Mater., 2002, Iss. 1, Vol. 50, pp 209-222.10.1016/S1359-6454(01)00332-9 ↗
51. J.Z. Liu, A.v.d. Walle, G. Ghosh and M. Asta: Phys. Rev. B: Condens. Matter Mater. Phys., 2005, Iss. 14, Vol. 72, pp 1-16.
52. E. Kozeschnik: Scripta Mater., 2008, Iss. 9, Vol. 59, pp 1018-1021.10.1016/j.scriptamat.2008.07.008 ↗
53. J. Farren, A.H. Hunter, D.N. Seidman, C. Robino, E. Kozeschnik, and J. DuPont: Metall. Mater. Trans. A, 2012, Appeared online July 4, 2012.
54. B. Leister and J.N. DuPont: Weld. J. (Miami, Fl, U. S.), 2012, in press.
55. Astm Standard E384-10e1 Standard Test Method for Knoop and Vickers Hardness of Materials.
56. D. Isheim, A.H. Hunter, X.J. Zhang, and D.N. Seidman: unpublished research, 2012.
57. O.C. Hellman, J.A. Vandenbroucke, J. Rusing, D. Isheim and D.N. Seidman: Microsc. microanal., 2000, Iss. 5, Vol. 6, pp 437-444.10.1007/S100050010051 ↗
58. J.W. Cahn: Interfacial Segregation, ed., American Society for Metals, Chicago, IL, 1977, pp. 3-23.
59. 59.O.C. Hellman, D.N. Seidman (2002) Mater. Sci. Eng. A 327(1):24-28.10.1016/S0921-5093(01)01885-8 ↗
60. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Steels : Microstructure and Properties, 3rd, Butterworth-Heinemann, Oxford, U.K., 2006.
61. A. Saha and G.B. Olson: J. Comput-Aided Mater. Des., 2007, Iss. 2, Vol. 14, pp 177-200.10.1007/s10820-006-9031-z ↗
62. G. Spanos, D.W. Moon, R.W. Fonda, E.S.K. Menon and A.G. Fox: Metall. Mater. Trans. A, 2001, Iss. 12, Vol. 32, pp 3043-3054.10.1007/s11661-001-0179-6 ↗
63. X.H. Yu, J.L. Caron, S.S. Babu, J.C. Lippold, D. Isheim and D.N. Seidman: Metall. Mater. Trans. A, 2011, Iss. 12, Vol. 42A, pp 3669-3679.10.1007/s11661-011-0707-y ↗
64. J.R. Davis: Alloying : Understanding the Basics, ASM International, Materials Park, OH, 2001, pp. 223-233.10.31399/asm.tb.aub.9781627082976 ↗
65. C. Zhu, A. Cerezo and G.D.W. Smith: Ultramicroscopy, 2009, Iss. 5, Vol. 109, pp 545-552.10.1016/j.ultramic.2008.12.007 ↗
66. K.A. Taylor, L. Chang, G.B. Olson, G.D.W. Smith, M. Cohen and J.B. Vandersande: Metall. Trans. A, 1989, Vol. 20A, pp 2717-2737.10.1007/BF02670166 ↗
67. K.A. Taylor, G.B. Olson, M. Cohen and J.B. Vandersande: Metall. Trans. A, 1989, Vol. 20, pp 2749-2765.10.1007/BF02670168 ↗
68. O.N.C. Uwakweh, J.M.R. Genin and J.F. Silvain: Metall. Trans. A, 1991, Vol. 22, pp 797-806.10.1007/BF02658989 ↗