journal article·2022-01

Effect of Gas Pressure on Hydrogen Environment Embrittlement of Carbon Steel A106 in Carbon Monoxide Mixed Hydrogen Gas

Ryosuke Komoda, Masanobu Kubota, Aleksandar Staykov, Patrick Ginet, Francoise Barbier, Jader Furtado, Laurent Prost, Akihide Nagao

Publisher page

Abstract

The addition of a small volume fraction of carbon monoxide (CO) gas to pure gaseous H2 potentially mitigates the susceptibility of steel to hydrogen environment embrittlement (HEE). The effect of environmental gas pressure on the mitigation of HEEs by a mixture of H2 and CO was examined in this study. Fracture toughness tests of an ASTM A106 pipe carbon steel were carried out in H2 gas containing CO. The environmental gas pressures at which the fracture toughness tests were conducted were 0.6, 1.0 and 4.0 MPa. The addition of a certain concentration of CO to H2 gas completely prevented HEE. The CO concentration achieving complete HEE prevention increased with an enhancement of the environmental gas pressure. Molecular dynamics (MD) simulations were further conducted to interpret the experimental results based on the interactions of H2 and CO with the Fe surface in conjunction with the effect of gas pressure. The MD simulations revealed that the dissociation rate of dihydrogen molecules to atomic hydrogen on the Fe surface significantly increased with an elevation of the gas pressure, whereas the adsorption rate of CO on the Fe surface was almost independent of the gas pressure. These results suggest that the increase in the gas pressure relatively promotes hydrogen uptake into the material in the presence of CO, which accounts for the experimental results showing that the CO concentration achieving complete HEE prevention increased with the elevation of the gas pressure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. M.R. Louthan, G.R. Caskey, J.A. Donovan, and D.E. Rawl: Mater. Sci. Eng., 1972, vol. 10, pp. 357–68.10.1016/0025-5416(72)90109-7 ↗
2. D.H. Coleman, B.N. Popov, and R.E. White: J. Appl. Electrochem., 1998, vol. 28, pp. 889–94.10.1023/A:1003408230951 ↗
3. J. Yamabe, T. Awane, and S. Matsuoka: Int. J. Hydrogen Energy., 2015, vol. 40, pp. 10329–39.10.1016/j.ijhydene.2015.06.023 ↗
4. V. Srikrishnan and P.J. Ficalora: Metall. Trans. A., 1976, vol. 7A, pp. 1669–2175.10.1007/BF02817884 ↗
5. J.D. Frandsen and H.L. Marcus: Metall. Trans. A., 1977, vol. 8A, pp. 265–72.10.1007/BF02661639 ↗
6. K. Kussmaul, P. Deimel, H. Fischer, and E. Sattler: Int. J. Hydrogen Energy., 1998, vol. 23, pp. 577–82.10.1016/S0360-3199(97)00104-3 ↗
7. J.H. Holbrook, H.J. Cialone, E.W. Collings, E.J. Drauglis, P.M. Scott, and M.E. Mayfield: in Gaseous hydrogen embrittlement of materials in energy technologies, vol. 2, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, Cambridge, 2012, pp. 129–53.10.1533/9780857095374.1.129 ↗
8. B.P. Somerday, P. Sofronis, K.A. Nibur, C. San Marchi, and R. Kirchheim: Acta Mater., 2013, vol. 61, pp. 6153–70.10.1016/j.actamat.2013.07.001 ↗
9. R. Komoda, M. Kubota, A. Staykov, P. Ginet, F. Barbier, and J. Furtado: Fatigue Fract. Eng. Mater. Struct., 2019, vol. 42, pp. 1387–401.10.1111/ffe.12994 ↗
10. R. Komoda, K. Yamada, M. Kubota, P. Ginet, F. Barbier, J. Furtado, and L. Prost: Int. J. Hydrogen Energy., 2019, vol. 44, pp. 29007–16.10.1016/j.ijhydene.2019.09.146 ↗
11. R. Komoda, M. Kubota, S. Yoshida, A. Staykov, P. Ginet, F. Barbier and J. Furtado, Proceedings of the Twenty-eight International Ocean and Polar Engineering Conference, 2018, pp. 236-42.
12. A. Staykov, J. Yamabe, and B.P. Somerday: Int. J. Quantum Chem., 2014, vol. 114, pp. 626–35.10.1002/qua.24633 ↗
13. N. Moody, S.L. Robinson, and W.M. Garrison Jr.: Res Mech., 1990, vol. 30, pp. 143–206.
14. K.A. Nibur, B.P. Somerday, C. San Marchi, J.W. Foulk, M. Dadfarnia, P. Sofronis and G.A. Hayden, Sandia Report, 2010, Sand2010-4633.
15. Y. Kondo and M. Kubota: J. Jpn. Soc. Mater. Sci., 2011, vol. 60, pp. 898–904.10.2472/jsms.60.898 ↗
16. A. Macadre, M. Artamonov, S. Matsuoka, and J. Furtado: Eng. Fract. Mech., 2011, vol. 78, pp. 3196–211.10.1016/j.engfracmech.2011.09.007 ↗
17. A. Staykov, R. Komoda, M. Kubota, P. Ginet, F. Barbier, and J. Furtado: J. Phys. Chem. C., 2019, vol. 123, pp. 30265–73.10.1021/acs.jpcc.9b06927 ↗
18. D.P. Williams and H.G. Nelson: Metall. Trans., 1970, vol. 1, pp. 63–8.10.1007/BF02819243 ↗
19. H. Barthélém: Int. J. Hydrogen Energy., 2011, vol. 36, pp. 2750–8.10.1016/j.ijhydene.2010.05.029 ↗
20. J. Yamabe, M. Yoshikawa, H. Matsunaga, and S. Matsuoka: Proc. Struct. Integr., 2016, vol. 2, pp. 525–32.
21. Y. Ogawa, H. Matsunaga, J. Yamabe, M. Yoshikawa, and S. Matsuoka: Int. J. Fatigue., 2017, vol. 103, pp. 223–33.10.1016/j.ijfatigue.2017.06.006 ↗
22. D.H. Lassila and H.K. Birnbaum: Acta Metall., 1988, vol. 36, pp. 2821–5.10.1016/0001-6160(88)90128-9 ↗
23. S. Matsuoka, O. Takakuwa, S. Okazaki, M. Yoshikawa, J. Yamabe, and H. Matsunaga: Scr. Mater., 2018, vol. 154, pp. 101–5.10.1016/j.scriptamat.2018.05.035 ↗
24. K. Wada, J. Yamabe, and H. Matsunaga: Materialia., 2019, vol. 53, p. 100478.10.1016/j.mtla.2019.100478 ↗
25. M. Nagumo, H. Yoshida, Y. Shimomura, and T. Kadokura: Mater. Trans., 2001, vol. 42, pp. 132–7.10.2320/matertrans.42.132 ↗
26. K. Splichal, J. Berka, J. Burda, and M. Zmitko: J. Nucl. Mater., 2009, vol. 392, pp. 125–32.10.1016/j.jnucmat.2009.03.053 ↗
27. R. Wang: Corros. Sci., 2009, vol. 51, pp. 2803–10.10.1016/j.corsci.2009.07.013 ↗
28. M.L. Martin, J.A. Fenske, G.S. Liu, P. Sofronis, and I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 1601–6.10.1016/j.actamat.2010.11.024 ↗
29. C.D. Beachem: Metall. Trans., 1972, vol. 3, pp. 441–55.10.1007/BF02642048 ↗
30. D.P. Abraham and C.J. Altstetter: Metall. Mater. Trans. A., 1995, vol. 26A, pp. 2859–71.10.1007/BF02669644 ↗
31. K.A. Nibur, D.F. Bahr, and B.P. Somerday: Acta Mater., 2006, vol. 54, pp. 2677–84.10.1016/j.actamat.2006.02.007 ↗
32. Y. Mine and Z. Horita: Mater. Trans., 2012, vol. 53, pp. 773–85.10.2320/matertrans.M2011384 ↗
33. A. Macadre, T. Tsuchiyama, and S. Takaki: J. Mater. Sci., 2017, vol. 52, pp. 3419–28.10.1007/s10853-016-0630-0 ↗
34. A.S. Tetelman and W.D. Robertson: Acta Metall., 1963, vol. 11, pp. 415–26.10.1016/0001-6160(63)90166-4 ↗
35. F. Nakasato and I.M. Bernstein: Metall. Trans. A., 1978, vol. 9A, pp. 1317–26.10.1007/BF02652256 ↗
36. A. Kimura and H. Kimura: Mater. Sci. Eng., 1986, vol. 77, pp. 75–83.10.1016/0025-5416(86)90355-1 ↗
37. T. Wang, X.X. Tian, Y.W. Li, J. Wang, M. Beller, and H. Jiao: ACS Catal., 2014, vol. 4, pp. 1991–2005.10.1021/cs500287r ↗
38. G. Te Velde, F.M. Bickelhaupt, E.J. Baerends, C. FonsecaGuerra, S.J.A. van Gisbergen, J.G. Snijders, and T. Ziegler: J. Comput. Chem., 2001, vol. 22, pp. 931–67.10.1002/jcc.1056 ↗
39. C. Zou and A. Van Duin: JOM., 2012, vol. 64, pp. 1426–37.10.1007/s11837-012-0463-5 ↗