Creep Behavior of a High-$$\gamma\prime$$ Ni-Based Superalloy Fabricated via Electron Beam Melting
Source abstract
Abstract
Additive manufacturing enables the fabrication of complex engineering components previously inaccessible through traditional processes. Nickel-base superalloys with large $$\gamma\prime$$ volume fraction are typically considered non-weldable and therefore exhibit a propensity for cracking during the fusion process. These crack-prone materials, however, are of great importance in gas turbine engines due to their excellent high temperature creep resistance. In this study we investigate the creep behavior of IN738LC produced by the electron beam melting process. We find that with appropriate post-build heat treatment the creep response of material oriented in the build direction exhibits deformation and rupture behavior comparable to that of conventionally cast IN738 & IN738LC. In the transverse direction properties fall below the expected cast behavior, however, we argue this is likely due to differences in grain scale and crystallographic texture. It may be possible to coarsen the grain morphology with appropriate process-parameter optimization in order to reduce the severity of intergranular fracture in the transverse direction. These results illustrate that high temperature properties exhibited by additively manufactured IN738LC are suitable for the hot section of gas turbine engines.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. R.C. Reed, The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2008.
2. C.T. Sims: Superalloys, TMS, Warrendale, PA, 1984, pp. 399–419
3. F. VerSnyder: in Proceedings of a Conference held in Liege, 1982.
4. R. Brunetaud, D. Coutsouradis, T. Gibbons, Y. Lindblom, D. Meadowcroft, and R. Stickler: in Proceedings of a Conference held in Liege, 1982.
5. W. Betteridge, S. Shaw, Mater. Sci. Technol., 1987, vol. 39, 682–9410.1179/mst.1987.3.9.682 ↗
6. F.I. Versnyder, M. Shank, Mater. Sci. Eng., 1970, vol. 64, 213–4710.1016/0025-5416(70)90050-9 ↗
7. B. Piearcey, F. VerSnyder, J. Aircraft, 1966, vol. 35, 390–9710.2514/3.43751 ↗
8. S.F.L. Ver: Gas turbine element, US Patent 3,260,505, 1966.
9. L. Mataveli Suave, J. Cormier, P. Villechaise, D. Bertheau, G. Benoit, G. Cailletaud, and L. Marcin: Mater. High Temp., vol. 334–345, 361–71, 2016.10.1080/09603409.2016.1159836 ↗
10. J. Lacaze and A. Hazotte: Text. Microstruct., 1970, vol. 13, art. no. 601079.
11. T. Pollock, A. Argon, Acta Metall. Mater., 1992, vol. 401, 1–3010.1016/0956-7151(92)90195-K ↗
12. M. Nathal, L. Ebert, Metall. Trans. A, 1985, vol. 1610, 1863–7010.1007/BF02670373 ↗
13. T. Murakumo, T. Kobayashi, Y. Koizumi, H. Harada, Acta Mater., 2004, vol. 5212, 3737–4410.1016/j.actamat.2004.04.028 ↗
14. A. Giamei, D. Anton, Metall. Trans. A, 1985, vol. 1611, 1997–200510.1007/BF02662400 ↗
15. P. Caron, T. Khan, Mater. Sci. Eng., 1983, vol. 612, 173–8410.1016/0025-5416(83)90199-4 ↗
16. R.R. Dehoff, M. Kirka, W. Sames, H. Bilheux, A. Tremsin, L. Lowe, S. Babu, Mater. Sci. Technol., 2015, vol. 318, 931–3810.1179/1743284714Y.0000000734 ↗
17. N. Raghavan, R. Dehoff, S. Pannala, S. Simunovic, M. Kirka, J. Turner, N. Carlson, S.S. Babu, Acta Mater., 2016, vol. 112, 303–31410.1016/j.actamat.2016.03.063 ↗
18. N. Raghavan, S. Simunovic, R. Dehoff, A. Plotkowski, J. Turner, M. Kirka, S. Babu, Acta Mater., 2017, vol. 140, 375–8710.1016/j.actamat.2017.08.038 ↗
19. G. Dinda, A. Dasgupta, J. Mazumder, Scr. Mater., 2012, vol. 675, 503–0610.1016/j.scriptamat.2012.06.014 ↗
20. H. Wei, J. Mazumder, T. DebRoy, Sci. Rep., 2015, vol. 5, 1644610.1038/srep16446 ↗
21. L.L. Parimi, G. Ravi, D. Clark, M.M. Attallah, Mater. Charact., 2014, vol. 89, 102–11110.1016/j.matchar.2013.12.012 ↗
22. C. Körner, M. Ramsperger, C. Meid, D. Bürger, P. Wollgramm, M. Bartsch, G. Eggeler, Metall. Mater. Trans. A, 2018, vol. 499A, 3781–9210.1007/s11661-018-4762-5 ↗
23. M. Ramsperger, R.F. Singer, and C. Körner: Metall. Mater. Trans. A, 2016, vol. 473A, 1469–80.10.1007/s11661-015-3300-y ↗
24. E. Chauvet, C. Tassin, J.J. Blandin, R. Dendievel, G. Martin, Scr. Mater., 2018, vol. 152, 15–1910.1016/j.scriptamat.2018.03.041 ↗
25. F. Geiger, K. Kunze, T. Etter, Mater. Sci. Eng. A, 2016, vol. 661, 240–4610.1016/j.msea.2016.03.036 ↗
26. V. Popovich, E. Borisov, V.S. Sufiyarov, A. Popovich, Met. Sci. Heat Treat., 2019, vol. 6011-6012, 701–0910.1007/s11041-019-00343-z ↗
27. L. Thijs, M.L.M. Sistiaga, R. Wauthle, Q. Xie, J.P. Kruth, J. Van Humbeeck, Acta Mater., 2013, vol. 6112, 4657–6810.1016/j.actamat.2013.04.036 ↗
28. K. Kunze, T. Etter, J. Grässlin, V. Shklover, Mater. Sci. Eng. A, 2015, vol. 620, 213–2210.1016/j.msea.2014.10.003 ↗
29. T. Etter, K. Kunze, F. Geiger, and H. Meidani: in IOP Conference Series: Materials Science and Engineering, vol. 82, p. 012097, IOP Publishing, Bristol, 2015.10.1088/1757-899X/82/1/012097 ↗
30. M.L. Montero-Sistiaga, S. Pourbabak, J. Van Humbeeck, D. Schryvers, K. Vanmeensel, Mater. Des., 2019, vol. 165, 10759810.1016/j.matdes.2019.107598 ↗
31. W.J. Sames, F. List, S. Pannala, R.R. Dehoff, S.S. Babu, Int. Mater. Rev., 2016, vol. 615, 315–6010.1080/09506608.2015.1116649 ↗
32. R.F. Decker, Metall. Trans., 1973, vol. 411, 2495–51810.1007/BF02644252 ↗
33. V. Mohles, D. Rönnpagel, E. Nembach, Comput. Mater. Sci., 1999, vol. 161-4, 144–5010.1016/S0927-0256(99)00056-7 ↗
34. L.N. Carter, M.M. Attallah, R.C. Reed, Superalloys, 2012, vol. 2012, 577–8610.7449/2012/Superalloys_2012_577_586 ↗
35. M. Henderson, D. Arrell, R. Larsson, M. Heobel, G. Marchant, Sci. Technol. Weld. Join., 2004, vol. 91, 13–2110.1179/136217104225017099 ↗
36. M.J. Donachie and S.J. Donachie: Superalloys: A Technical Guide, ASM International, Materials Park, 2002.10.31399/asm.tb.stg2.9781627082679 ↗
37. J. Yang, F. Li, Z. Wang, X. Zeng, J. Mater. Process. Technol., 2015, vol. 225, 229–3910.1016/j.jmatprotec.2015.06.002 ↗
38. R. Engeli, T. Etter, S. Hoevel, K. Wegener, J. Mater. Process. Technol., 2016, vol. 229, 484–9110.1016/j.jmatprotec.2015.09.046 ↗
39. S. Asavavisithchai, W. Homkrajai, P. Wangyao, High Temp. Mater. Processes, 2010, vol. 291-2, 61–6810.1515/HTMP.2010.29.1-2.61 ↗
40. O. Ojo, N. Richards, M. Chaturvedi, Scr. Mater., 2004, vol. 505, 641–4610.1016/j.scriptamat.2003.11.025 ↗
41. R. Reed, N. Matan, D. Cox, M. Rist, C. Rae, Acta Mater., 1999, vol. 4712, 3367–8110.1016/S1359-6454(99)00217-7 ↗
42. R. Stevens, P. Flewitt, Mater. Sci. Eng., 1979, vol. 373, 237–4710.1016/0025-5416(79)90157-5 ↗
43. R. Stevens, P. Flewitt, Acta Metall., 1981, vol. 295, 867–8210.1016/0001-6160(81)90129-2 ↗
44. D. Woodford, J. Frawley, Metall. Trans., 1974, vol. 59, 2005–201310.1007/BF02644493 ↗
45. R. Mishra, S. Singh, A. Sriramamurthy, M. Pandey, Mater. Sci. Technol., 1995, vol. 114, 341–4610.1179/mst.1995.11.4.341 ↗
46. L. Rickenbacher, T. Etter, S. Hövel, K. Wegener, Rapid Prototyping J., 2013, vol. 194, 282–9010.1108/13552541311323281 ↗
47. J. Xu, H. Gruber, D. Deng, R.L. Peng, J.J. Moverare, Acta Mater., 2019, vol. 179, 142–5710.1016/j.actamat.2019.08.034 ↗
48. Y.T. Tang, A.J. Wilkinson, R.C. Reed, Metall. Mater. Trans. A, 2018, vol. 499, 4324–4210.1007/s11661-018-4671-7 ↗
49. J. Risse, C. Broeckmann, Additive manufacturing of nickel-base superalloy in738lc by laser powder bed fusion. Tech. Rep., Lehrstuhl für Lasertechnik, 2019
50. M. Pröbstle, S. Neumeier, J. Hopfenmüller, L. Freund, T. Niendorf, D. Schwarze, M. Göken, Mater. Sci. Eng. A, 2016, vol. 674, 299–30710.1016/j.msea.2016.07.061 ↗
51. L. Thébaud, P. Villechaise, C. Crozet, A. Devaux, D. Béchet, J.M. Franchet, A.L. Rouffié, M. Mills, J. Cormier, Mater. Sci. Eng. A, 2018, vol. 716, 274–8310.1016/j.msea.2017.12.104 ↗
52. B. Shassere, D. Greeley, A. Okello, M. Kirka, P. Nandwana, R. Dehoff, Metall. Mater. Trans. A, 2018, vol. 4910A, 5107–11710.1007/s11661-018-4812-z ↗
53. Y.L. Kuo, S. Horikawa, K. Kakehi, Scr. Mater., 2017, vol. 129, 74–7810.1016/j.scriptamat.2016.10.035 ↗
54. Y.L. Kuo, T. Nagahari, K. Kakehi, Materials, 2018, vol. 116, 99610.3390/ma11060996 ↗
55. W. Sames: Additive manufacturing of inconel 718 using electron beam melting: processing, post-processing, & mechanical properties, Ph.D. thesis, Texas A & M, 2015.
56. O. Messé, R. Muñoz-Moreno, T. Illston, S. Baker, H. Stone, Addit. Manuf., 2018, vol. 22, 394–404
57. G. Jiangting, D. Ranucci, E. Picco, Superalloys 1984, 1984, pp. 689–98
58. R. Castillo, A. Koul, and J. Immarigeom: in: Superalloys 1988, The Metallurgical Society, 1988.
59. National Institute for Materials Science: in: NIMS Creep Data Sheet, NIMS, Tsukuba, 2007.
60. The International Nickel Company, Inc.: Alloy IN-738 Technical Data, The International Nickel Company Inc, New York, 1981.
61. A. Koul, J. Immarigeon, R. Castillo, P. Lowden, and J. Liburdi, in Proceedings of Superalloys 1988 (Sixth International Symposium), pp. 755–764, 1988.10.7449/1988/Superalloys_1988_755_764 ↗
62. A. Ibanez, V. Srinivasan, A. Saxena, Fatigue Fract. Eng. Mater. Struct., 2006, vol. 2912, 1010–2010.1111/j.1460-2695.2006.01066.x ↗
63. G. Jianting, D. Ranucci, E. Picco, Mater. Sci. Eng., 1983, vol. 581, 127–3310.1016/0025-5416(83)90144-1 ↗
64. F. Bachmann, R. Hielscher, and H. Schaeben, in Solid State Phenomenon, vol. 160, pp. 63–68, Trans Tech Publ, 2010.10.4028/www.scientific.net/SSP.160.63 ↗
65. M.I. Latypov, M. Kühbach, I.J. Beyerlein, J.C. Stinville, L.S. Toth, T.M. Pollock, S.R. Kalidindi, Mater. Charact., 2018, vol. 145, 671–8510.1016/j.matchar.2018.09.020 ↗
66. D.M. Turner, S.R. Niezgoda, S.R. Kalidindi, Model. Simul. Mater. Sci. Eng., 2016, vol. 247, 07500210.1088/0965-0393/24/7/075002 ↗
67. P. Fernandez-Zelaia, S.N. Melkote, J. Mater. Process. Technol., 2019, vol. 273, 11625110.1016/j.jmatprotec.2019.116251 ↗
68. OpenCV: Open Source Computer Vision Library, 2015.
69. K.A. Unocic, D. Shin, X. Sang, E. Cakmak, P.F. Tortorelli, Scr. Mater., 2019, vol. 162, 416–2010.1016/j.scriptamat.2018.11.045 ↗
70. L. Liu, F. Sommer, and H. Fu: Scr. Metall. Mater. (U.S.), vol. 30, 587–591, 1994.10.1016/0956-716X(94)90434-0 ↗
71. F. Furillo, J. Davidson, J. Tien, L. Jackman, Mater. Sci. Eng., 1979, vol. 392, 267–7310.1016/0025-5416(79)90065-X ↗
72. R. Oruganti, M. Karadge, S. Nalawade, S. Kelekanjeri, F. Mastromatteo, Superalloys 2012, 2012, pp. 473–7910.7449/2012/Superalloys_2012_473_479 ↗
73. F.C. Monkman and N. Grant: in Proceedings of ASTM, vol. 56, pp. 91–103, 1956
74. P. Caron, T. Khan, Y. Ohta, Y. Nakagawa, Superalloys 1988, pp. 215–24 (1988)
75. R. Coble, J. Appl. Phys., 1963, vol. 346, 1679–8210.1063/1.1702656 ↗
76. A.T. Polonsky, M.P. Echlin, W.C. Lenthe, R.R. Dehoff, M.M. Kirka, T.M. Pollock, Mater. Charact., 2018, vol. 143, 171–8110.1016/j.matchar.2018.02.020 ↗
77. C.S. Kim, C.Y. Hyun, K.Y. Jhang, Int. J. Mod. Phys. B, 2011, vol. 2510, 1385–9210.1142/S0217979211100011 ↗
78. M. Kirka, K. Brindley, R. Neu, S. Antolovich, S. Shinde, P. Gravett, Int. J. Fatigue, 2015, vol. 81, 191–20110.1016/j.ijfatigue.2015.08.001 ↗
79. M. Kirka, K. Brindley, R. Neu, S. Antolovich, S. Shinde, P. Gravett, Int. J. Fatigue, 2015, vol. 81, 48–6010.1016/j.ijfatigue.2015.07.011 ↗
80. F.R. Nabarro, Metall. Mater. Trans. A, 1996, vol. 273, 513–3010.1007/BF02648942 ↗
81. O. Paris, M. Fa, E. Fa, T. Pollock, P. Fratzl, et al., Acta Mater., 1997, vol. 453, 1085–9710.1016/S1359-6454(96)00223-6 ↗
82. N. Matan, D. Cox, C. Rae, R. Reed, Acta Mater., 1999, vol. 477, 2031–4510.1016/S1359-6454(99)00093-2 ↗
83. R. MacKay, M. Nathal, Acta Metall. Mater., 1990, vol. 386, 993–100510.1016/0956-7151(90)90171-C ↗
84. A. Epishin, T. Link, H. Klingelhöffer, B. Fedelich, P. Portella, Mater. High Temp., 2010, vol. 271, 53–5910.3184/096034009X12603595726283 ↗
85. A. Brailsford, P. Wynblatt, Acta Metall., 1979, vol. 273, 489–9710.1016/0001-6160(79)90041-5 ↗
86. H. Huang, G. Liu, H. Wang, A. Ullah, B. Hu, Metall. Mater. Trans. A, 2020, vol. 513A, 1075–8410.1007/s11661-019-05581-7 ↗
87. I.M. Lifshitz, V.V. Slyozov, J. Phys. Chem. Solids, 1961, vol. 191-192, 35–5010.1016/0022-3697(61)90054-3 ↗