journal article·2021-01

The Correlation Between the Microstructural Parameters and Mechanical Properties of Reduced Activation Ferritic–Martensitic (RAFM) Steel: Influence of Roll Deformation and Medium Temperature Tempering

Chunliang Mao, Chenxi Liu, Guowang Liu, Liming Yu, Huijun Li, Ji Dong, Yongchang Liu

Publisher page

Abstract

The evolutionary behaviors of dislocations, sub-grain boundaries (SGBs), and precipitated carbide particles in 9Cr-1.7W-0.1C reduced activation ferritic–martensitic (RAFM) steel were studied by implementing varying levels of roll deformation and tempering processes. The microstructural parameters were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electron backscatter diffraction (EBSD). The relationships between these parameters, the deformation levels, and different tempering processes were quantitatively determined. The obtained results demonstrate that both high-level deformation and dual tempering (medium-temperature tempering T1 followed by standard tempering T2) contribute to the refinement of M23C6/MX particles, especially M23C6, due to the greater abundance of nucleation sites for M23C6/MX particles supplied by SGBs. How the correlation among these different microstructural parameters (dislocations, SGBs, and carbide particles) influenced the decreased process of engineering strength both at room temperature (RT) and high temperature was qualitatively and quantitatively discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. [1] C.A. Williams, J.M. Hyde, G.D.W. Smith, E.A. Marquis: J. Nucl. Mater., 2011, vol. 412, pp100–105.10.1016/j.jnucmat.2011.02.029 ↗
2. [2] X. Zhou, C. Liu, L. Yu, Y. Liu, H. Li: J. Mater. Sci. Technol., 2015, vol. 31, pp 235–242.10.1016/j.jmst.2014.12.001 ↗
3. [3] S. Kano, H.L. Yang, R. Suzue, Y. Matsukawa, Y. Satoh, H. Sakasegawa, H. Tanigawa, H. Abe: Nucl. Mater. Energy, 2016, vol. 9, pp 331–337.10.1016/j.nme.2016.09.017 ↗
4. [4] N. Baluc: J. Nucl. Mater., 2007, vol. 370, pp 33–41.10.1016/j.jnucmat.2007.03.036 ↗
5. [5] R.L. Klueh, A.T. Nelson: J. Nucl. Mater., 2007, vol. 371, pp37–52.10.1016/j.jnucmat.2007.05.005 ↗
6. [6] J. Chen, C. Liu, Y. Liu, B. Yan, H. Li: J. Nucl. Mater., 2016, vol. 479, pp 295–301.10.1016/j.jnucmat.2016.07.029 ↗
7. [7] Q. Zhao, Z. Ma, L. Yu, H. Li, C. Liu, C. Li, Y. Liu: J. Mater. Sci. Technol., 2019, vol. 35, pp 1064–1073.10.1016/j.jmst.2018.12.008 ↗
8. [8] C. Liu, Y. Gao, X. Li, W. Li, K. Gan: J. Nucl. Mater., 2020, vol. 531, pp 152011.10.1016/j.jnucmat.2020.152011 ↗
9. [9] X. Hu, L. Huang, W. Yan, W. Wang, W. Sha, Y. Shan, K. Yang: Mater. Sci. Eng. A., 2013, vol. 586, pp 253–258.10.1016/j.msea.2013.08.025 ↗
10. Materna-Morris E, Möslang A, Schneider H-C (2013) J Nucl Mater 442:62–6610.1016/j.jnucmat.2013.03.038 ↗
11. [11] A. Nishimura, N. Inoue, T. Muroga: J. Nucl. Mater., 1998, vol. 258–263, pp 1242–1247.10.1016/S0022-3115(98)00172-X ↗
12. [12] Y.F. Li, T. Nagasaka, T. Muroga, Q.Y. Huang, Y.C. Wu: J. Nucl. Mater., 2009, vol. 386–388, pp 495–498.
13. [13] K.C. Sahoo, J. Vanaja, P. Parameswaran, V.D. Vijayanand, K. Laha: Mater. Sci. Eng. A., 2017, vol. 686, pp 54–64.10.1016/j.msea.2017.01.030 ↗
14. [14] C. Mao, C. Liu, L. Yu, H. Li, Y. Liu: Mater. Sci. Eng. A., 2019, vol. 739, pp 90–98.10.1016/j.msea.2018.10.023 ↗
15. [15] Y. Tsuchida, K. Okamoto, Y. Tokunaga: ISIJ Int. 1995, vol. 35, pp 317–323.10.2355/isijinternational.35.317 ↗
16. [16] Y. Xu, M. Wang, Y. Wang, T. Gu, L. Chen, X. Zhou, Q. Ma, Y. Liu, J. Huang: J. Alloys Compd., 2015, vol. 621, pp 93–98.10.1016/j.jallcom.2014.09.204 ↗
17. [17] K. Sawada, M. Takeda, K. Maruyama, R. Ishii, M. Yamada, Y. Nagae, R. Komine: Mater. Sci. Eng. A, 1999, vol. 267, pp 19–25.10.1016/S0921-5093(99)00066-0 ↗
18. [18] P. Hofer, H. Cerjak, B. Schaffernak, P. Warbichler: Steel Res., 1998, vol. 69, pp 343–348.10.1002/srin.199805562 ↗
19. [19] S. Ukai, T. Nishida, T. Okuda, T. Yoshitake: J. Nucl. Mater., 1998, vol. 258–263, pp 1745–1749.10.1016/S0022-3115(98)00241-4 ↗
20. [20] M. Taneike, F. Abe, K. Sawada: Nature, 2003, vol. 424, pp 294–296.10.1038/nature01740 ↗
21. [21] L. Schäfer: J. Nucl. Mater., 1998, vol. 258–263, pp 1336–1339.10.1016/S0022-3115(98)00200-1 ↗
22. [22] Z. Shang, J. Ding, C. Fan, M. Song, J. Li, Q. Li, S. Xue, K.T. Hartwig, X. Zhang: Acta Mater., 2019, vol. 169, pp 209–224.10.1016/j.actamat.2019.02.043 ↗
23. [23] J. Pešička, R. Kužel, A. Dronhofer, G. Eggeler: Acta Mater., 2003, vol. 51, pp 4847–4862.10.1016/S1359-6454(03)00324-0 ↗
24. [24] S.S. Samant, I. V Singh, R.N. Singh: Mater. Sci. Eng. A, 2018, vol. 738, pp 135–152.10.1016/j.msea.2018.09.092 ↗
25. [25] X. Hu, L. Huang, W. Yan, W. Wang, W. Sha, Y. Shan, K. Yang: Mater. Sci. Eng. A, 2014, vol. 607, pp 356–359.10.1016/j.msea.2014.04.005 ↗
26. El-Desoky OE, Abd El-Azim ME, ElKossy MR (2019) Int J Press Vessel Pip 171:145–15210.1016/j.ijpvp.2019.02.008 ↗
27. [27] M. Mandal, R. Mitra: Mater. Sci. Eng. A, 2019, vol. 760, pp 88–104.10.1016/j.msea.2019.05.106 ↗
28. [28] T.D. Porter, K.O. Findley, M.J. Kaufman, R.N. Wright: Int. J. Fatigue, 2019, vol. 124, pp 205–216.10.1016/j.ijfatigue.2019.02.037 ↗
29. Ghatei Kalashami A, Kermanpur A, Ghassemali E, Najafizadeh A, Mazaheri Y (2016) Mater Sci Eng A 678:215–22610.1016/j.msea.2016.09.108 ↗
30. Soares GC, Gonzalez BM, de Arruda Santos L (2017) Mater Sci Eng A 684:577–58510.1016/j.msea.2016.12.094 ↗
31. [31] C. Mao, C. Liu, L. Yu, H. Li, Y. Liu: Mater. Sci. Eng. A, 2018, vol. 725, pp 283–289.10.1016/j.msea.2018.03.119 ↗
32. [32] C. Du, J.P.M. Hoefnagels, R. Vaes, M.G.D. Geers: Scr. Mater., 2016, vol. 116, pp 117–121.10.1016/j.scriptamat.2016.01.043 ↗
33. [33] D.T. Pierce, J.A. Jiménez, J. Bentley, D. Raabe, J.E. Wittig: Acta Mater., 2015, vol. 100, pp 178–190.10.1016/j.actamat.2015.08.030 ↗
34. [34] M. Dadé, J. Malaplate, J. Garnier, F. De Geuser, F. Barcelo, P. Wident, A. Deschamps: Acta Mater., 2017, vol. 127, pp 165–177.10.1016/j.actamat.2017.01.026 ↗
35. [35] G. Fribourg, Y. Bréchet, A. Deschamps, A. Simar: Acta Mater., 2011, vol. 59, pp 3621–3635.10.1016/j.actamat.2011.02.035 ↗
36. [36] A.A.F. Tavassoli, J.W. Rensman, M. Schirra, K. Shiba: Fusion Eng. Des., 2002, vol. 61–62, pp 617–628.10.1016/S0920-3796(02)00255-7 ↗
37. [37] L. Tan, L.L. Snead, Y. Katoh: J. Nucl. Mater., 2016, vol. 478, pp 42–49.10.1016/j.jnucmat.2016.05.037 ↗
38. [38] A. Ramar, R. Schäublin: J. Nucl. Mater., 2013, vol. 432, pp 323–333.10.1016/j.jnucmat.2012.07.024 ↗
39. M. Couvrat. Fabrication d’aciers ODS à haute performance: relation procédé, microstructure, propriétés. Université de Rennes, 2013
40. Susila P, Sturm D, Heilmaier M, Murty BS, Subramanya Sarma V (2011) Mater Sci Eng A 528:4579–458410.1016/j.msea.2011.02.078 ↗
41. [41] S. Morito, H. Yoshida, T. Maki, X. Huang: Mater. Sci. Eng. A, 2006, vol. 438–440, pp 237–240.10.1016/j.msea.2005.12.048 ↗
42. [42] J. Daigne, M. Guttmann, J.P. Naylor: Mater. Sci. Eng., 1982, vol. 56, pp 1–10.10.1016/0025-5416(82)90176-8 ↗
43. [43] A. Shibata, T. Nagoshi, M. Sone, S. Morito, Y. Higo: Mater. Sci. Eng. A, 2010, vol. 527, pp 7538–7544.10.1016/j.msea.2010.08.026 ↗
44. [44] E.I. Galindo-Nava, P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2015, vol. 98, pp 81–93.10.1016/j.actamat.2015.07.018 ↗
45. [45] F.R.S. G. I. Taylor: Proc. R. Soc. London. Ser. A, 1934, vol. 145, pp 362.10.1098/rspa.1934.0106 ↗
46. Kim B, Boucard E, Sourmail T, San Martín D, Gey N, Rivera-Díaz-del-Castillo PEJ (2014) Acta Mater 68:169–17810.1016/j.actamat.2014.01.039 ↗
47. [47] T. Gladman: Mater. Sci. Technol., 1999, vol. 15, pp 30–36.10.1179/026708399773002782 ↗
48. [48] Y. Xu, X. Zhang, Y. Tian, C. Chen, Y. Nan, H. He, M. Wang: Mater. Charact., 2016, vol. 111, pp 122–127.10.1016/j.matchar.2015.11.023 ↗
49. [49] A. Kostka, K.G. Tak, R.J. Hellmig, Y. Estrin, G. Eggeler: Acta Mater., 2007, vol. 55, pp 539–550.10.1016/j.actamat.2006.08.046 ↗