Effects of Titanium Addition on the Microstructural and Mechanical Property Evolution of FeCrB Alloys
Source abstract
Abstract
Effects of Ti addition on the microstructural and mechanical property evolution of FeCrB alloys have been systematically studied through experiments and modeling. Microstructural analysis reveals that Ti addition can induce the formation of in situ nanoparticles which can be mainly divided into two categories based on their distribution types. The first are the interfacial ones accumulating on the boride surface to control their growth, while the second are the intragranular ones distributed in the matrix to reinforce the FeCrB alloys. Model predictions show that the nanoparticle-induced growth restriction is responsible for the microstructural refinement. The refined microstructure and reinforcing nanoparticles can lead to the enhanced mechanical properties of FeCrB alloys. When the Ti addition reaches 1.4 wt pct, the FeCrB alloy exhibits the most refined and homogeneous microstructure and thus the optimal performance with its microhardness, macrohardness, ultimate tensile strength, elongation, impact toughness, and the wear-resistant performance are increased by 31.9, 29.0, 39.7, 128.6, 27.3, and 350 pct, respectively, compared with the base alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. [1] J. Xu, M.A. Bright, X.B. Liu and E. Barbero: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2727-36.10.1007/s11661-007-9320-5 ↗
2. [2] K. Zhang: Wear, 2003, vol. 255, pp. 545-555.10.1016/S0043-1648(03)00050-4 ↗
3. [3] R.F. Yang, P. Zhang and J.H. Wu: Mater. Sci. Eng. A, 2009, vol. 499, pp. 134-137.10.1016/j.msea.2008.04.074 ↗
4. [4] X.M. Zhang and W.P. Chen: Trans. Nonferrous Met. Soc. China, 2015, vol. 25, pp. 1715-31.10.1016/S1003-6326(15)63777-3 ↗
5. [5] L.F. Hou, Y.H. Wei, Y.G. Li, B.S. Liu, H.Y. Du and C.L. Guo: Eng. Failure Anal., 2013, vol. 33, pp. 457-464.10.1016/j.engfailanal.2013.06.018 ↗
6. [6] B.S. Liu, Y.G. Wei, H.M. Li and L.F. Hou: Eng. Failure Anal., 2014, vol. 39, pp. 200-206.10.1016/j.engfailanal.2014.02.005 ↗
7. [7] E. Yamaki, K. Ginestar and L. Martinelli: Corros. Sci., 2011, vol. 53, pp. 3075-85.10.1016/j.corsci.2011.05.031 ↗
8. [8] J. Zhang, P. Hosemann and S. Maloy: J. Nucl. Mater., 2010, vol. 404, pp. 82-96.10.1016/j.jnucmat.2010.05.024 ↗
9. [9] J. Song, X.M. Wang, T. DenOuden and Q.Y. Han: Metall. Mater. Trans. A, 2016, vol. 47, pp. 2609-15.10.1007/s11661-016-3454-2 ↗
10. [10] A.E. Miller and D.M. Maijer: Mater. Sci. Eng. A, 2006, vol. 435, pp. 100-111.10.1016/j.msea.2006.07.052 ↗
11. [11] G.H. Awan and F.U. Hasan: Mater. Sci. Eng. A, 2008, vol. 472, pp. 157-165.10.1016/j.msea.2007.03.013 ↗
12. [12] G.K. Mandal, R. Balasubramaniam and S.P. Mehrotra: Metall. Mater. Trans. A, 2009, vol. 40, pp. 637-645.10.1007/s11661-008-9748-2 ↗
13. [13] Y. Wang, J.D. Xing, H.G. Fu, Y.Z. Liu, K.H. Zheng, S.Q. Ma and Y.X. Jian: Corros. Sci., 2018, vol. 131, pp. 290-299.10.1016/j.corsci.2017.12.003 ↗
14. [14] Y. Wang, J.D. Xing, S.Q. Ma, B.C. Zheng, H.G. Fu and G.Z. Liu: Corros. Sci., 2016, vol. 112, pp. 25-35.10.1016/j.corsci.2016.07.007 ↗
15. [15] G.Z. Liu, J.D. Xing, S.Q. Ma, Y.L. He, H.G. Fu, Y. Gao, Y. Wang and Y.R. Wang: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1900-07.10.1007/s11661-015-2820-9 ↗
16. [16] Z.C. Ling, W.P. Chen, T.W. Lu, B. Li and X.M. Zhang: Wear, 2019, vol. 430, pp. 81-93.10.1016/j.wear.2019.04.002 ↗
17. [17] X.M. Zhang, W.P. Chen and H.F. Luo: Tribol. Lett., 2018, vol. 66, pp. 112.10.1007/s11249-018-1066-2 ↗
18. [18] S.Q. Ma, J.D. Xing, H.G. Fu, Y.M. Gao and J.J. Zhang: Acta Mater., 2012, vol. 60, pp. 831-843.10.1016/j.actamat.2011.11.004 ↗
19. [19] C. Baron, H. Springer and D. Raabe: Mater. Sci. Eng. A, 2018, vol. 724, pp. 142-147.10.1016/j.msea.2018.03.082 ↗
20. [20] C. Baron, H. Springer and D. Raabe: Mater. Des., 2016, vol. 112, pp. 131-139.10.1016/j.matdes.2016.09.065 ↗
21. [21] S.Q. Ma, J.D. Xing, G.F. Liu, D.W. Yi, H.G. Fu, J.J. Zhang and Y.F. Li: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6800-08.10.1016/j.msea.2010.07.066 ↗
22. [22] Y.X. Jian, Z.F. Huang, J.D. Xing and Y.M. Gao: J. mater. Sci., 2018, vol. 53, pp. 5329-38.10.1007/s10853-017-1936-2 ↗
23. [23] J.J. Zhang, Y.M. Gao, J.D. Xing, S.Q. Ma, D.W. Yi and J.B. Yan: Tribol. Lett., 2011, vol. 44, pp. 31.10.1007/s11249-011-9823-5 ↗
24. [24] J. Lentz, A. Röttger, F. Großwendt and W. Theisen: Mater. Des., 2018, vol. 156, pp. 113-124.10.1016/j.matdes.2018.06.040 ↗
25. [25] Z.F. Huang, J.D. Xing and L. Lv: Mater. Charact., 2013, vol. 75, pp. 63-68.10.1016/j.matchar.2012.09.007 ↗
26. [26] Z.F. Huang, L. Chang, Z.W. Liu and Q.L. Zhang: Int. J. Mater. Res., 2017, vol. 108, pp. 424-426.10.3139/146.111491 ↗
27. [27] Y.X. Jian, Z.F. Huang, J.D. Xing and X.Z. Guo: J. Mater. Res., 2017, vol. 32, pp. 1718-26.10.1557/jmr.2017.41 ↗
28. [28] Y.X. Jian, Z.F. Huang, J.D. Xing, X.Z. Guo, Y. Wang and Z. Lv: Tribol. Lett., 2016, vol. 103, pp. 243-251.10.1016/j.triboint.2016.07.008 ↗
29. [29] B. Kowalczyk, K.J.M. Bishop, I. Lagzi, D.W. Wang, Y.H. Wei, S.B. Han and B. Grzybowski: Nat. Mater., 2012, vol. 11, pp. 227–32.10.1038/nmat3202 ↗
30. [30] L.Y. Chen, J.Q. Xu, H. Choi, H. Konishi, S. Jin and X.C. Li: Nat. commun., 2014, vol. 5, pp. 1–9.
31. [31] L.Y. Chen, J.Q. Xu and X.C. Li: Mater. Res. Lett., 2015, vol. 3, pp. 43-49.10.1080/21663831.2014.956264 ↗
32. [32] E. Guo, S. Shuai, D. Kazantsev, S. Karagadde, A.B. Phillion, T. Jing, W.Z. Li and P.D. Lee: Acta Mater., 2018, vol. 152, pp. 127-137.10.1016/j.actamat.2018.04.023 ↗
33. [33] K. Wang, H.Y. Jiang, Y.W. Jia, H. Zhou, Q.D. Wang, B. Ye and W.J. Ding: Acta Mater., 2016, vol. 103, pp. 252-263.10.1016/j.actamat.2015.10.005 ↗
34. [34] K. Wang, H.Y. Jiang, Q.D. Wang, B. Ye and W.J. Ding: Metall. Mater. Trans. A, 2016, vol. 47, pp. 4788-94.10.1007/s11661-016-3668-3 ↗
35. [35] Y. Liu, B.H. Li, J. Li, L. He, S.J. Gao and T.G. Nieh: Mater. Lett., 2010, vol. 64, pp. 1299-1301.10.1016/j.matlet.2010.03.013 ↗
36. [36] B.H. Li, Y. Liu, J. Li and L. He: J. Mater. Process. Technol., 2010, vol. 210, pp. 91-95.10.1016/j.jmatprotec.2009.08.008 ↗
37. [37] Y.F. Yang and Q.C. Jiang: Int. J. Refract. Met. Hard Mater., 2013, vol. 38, pp. 137-139.10.1016/j.ijrmhm.2012.12.004 ↗
38. [38] D. Wang, P. Shanthraj, H. Springer and D. Raabe: Mater. Des., 2018, vol. 160, pp. 557-571.10.1016/j.matdes.2018.09.033 ↗
39. [39] R. Aparicio-Fernández, H. Springer, A. Szczepaniak, H. Zhang and D. Raabe: Acta Mater., 2016, vol. 107, pp. 38-48.10.1016/j.actamat.2016.01.048 ↗
40. [40] L. Zhong, Y.H. Xu, M. Hojamberdiev, J.B. Wang and J. Wang: Mater. Des., 2011, vol. 32, pp. 3790-95.10.1016/j.matdes.2011.03.031 ↗
41. [41] G.P. Xu, K. Wang, X.P. Dong, H.Y. Jiang, Q.D. Wang, B. Ye and W.J. Ding: Corros. Sci., 2020, vol. 163, 108276.10.1016/j.corsci.2019.108276 ↗
42. [42] P. Villars and L.O. Calvert: Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, ASM, OH, USA, 1985.
43. [43] B. Bramfitt: Metall. Mater. Trans. B, 1970, vol. 1, pp. 1987-95.10.1007/BF02642799 ↗
44. [44] H. Men and Z. Fan: Acta Mater., 2011, vol. 59, pp. 2704–12.10.1016/j.actamat.2011.01.008 ↗
45. [45] M. Kumar, R. Sasikumar and P.K. Nair: Acta Mater., 1998, vol. 46, pp. 6291–6303.10.1016/S1359-6454(98)00243-2 ↗
46. [46] M. Qian, P. Cao, M.A. Easton, S.D. McDonald and D.H. StJohn: Acta Mater., 2010, vol. 58, pp. 3262–70.10.1016/j.actamat.2010.01.052 ↗
47. [47] Z. Fan, F. Gao, L. Zhou and S.Z. Lu: Acta Mater., 2018, vol. 152, pp. 248-257.10.1016/j.actamat.2018.04.045 ↗
48. [48] I. Maxwell and A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229-237.10.1016/0001-6160(75)90188-1 ↗
49. [49] C. Zener: J. appl. Phys., 1949, vol. 20, pp. 950-953.10.1063/1.1698258 ↗
50. [50] W. Yang, F. Liu, G.C. Yang, Z.F. Xu, J.H. Wang and Z.T. Wang: Thermochim. Acta, 2012, vol. 527, pp. 47-51.10.1016/j.tca.2011.10.003 ↗
51. [51] H. Baker: ASM handbook: alloy phase diagrams, ASM international, OH, USA, 1992, pp. 281.
52. Benxi Iron & Steel Co. (1977) Boron Steel. Metallurgical Industry Press, Beijing, pp. 2.
53. [53] N. Bizmark, M.A. Ioannidis and D.E. Henneke: Langmuir, 2014, vol. 30, pp. 710-717.10.1021/la404357j ↗
54. [54] K. Wang, H.Y. Jiang, Y.X. Wang, Q.D. Wang, B. Ye and W.J. Ding: Mater. Des., 2016, vol. 95, pp. 545-554.10.1016/j.matdes.2016.01.144 ↗
55. [55] N. Yüksel and S. Şahin: Mater. Des., 2014, vol. 58, pp. 491-498.10.1016/j.matdes.2014.02.032 ↗