journal article·2020-05

Texture Evolution and Dynamic Recrystallization Behavior of Hybrid-Reinforced Titanium Matrix Composites: Enhanced Strength and Ductility

Peikun Qiu, Yuanfei Han, Guangfa Huang, Jianwen Le, Liming Lei, Lv Xiao, Weijie Lu

Publisher page

Abstract

TiB, TiC and La2O3 hybrid-reinforced Ti-6Al-4V matrix composites were fabricated by common casting and processed by the following forging and isothermal extrusion. The texture evolution, dynamic recrystallization (DRX) behavior and mechanical properties of the as-extruded composites were investigated. The results show that DRXed regions and deformed regions formed during extrusion, strong 〈0001〉α, $$ \left\langle {10\bar{1}0} \right\rangle\alpha $$ and weak $$ \left\langle { 1 0 {\bar{\text{1}}\text{1}}} \right\rangle\alpha $$ fiber textures parallel to extrusion direction were formed due to the selection of slip system in α phase and inheritance from phase transformation according to Burgers orientation relationship. Additionally, the orientation of α grain in DRXed regions became randomized in comparison with the deformed regions. Micro-sized TiB short fibers not only acted as source to generated dislocations, but hindered dislocation slip to cause pile-ups around TiB, which is beneficial to stimulate dynamic recrystallization. Submicro-sized La2O3 particles distributed at the triple junction of grain boundaries could pin grain boundaries and hinder grain growth. Tensile test results show that the ultimate tensile strength got a 9.8 pct enhancement, from 834.3 ± 10 to 916.0 ± 10.6 MPa, accompanied by simultaneous improvement of elongation from 5.4 ± 0.6 to 12.2 ± 0.7 pct at room temperature. The simultaneous increase of strength and ductility was principally attributed to TiB fracture modes and grain refinement after extrusion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. S.C. Tjong and Y.W. Mai: Compos. Sci. Technol., 2008, vol. 68, pp. 583–601.10.1016/j.compscitech.2007.07.016 ↗
2. K. Kawabata, E. Sato and K. Kuribayashi: Acta Mater., 2003,vol. 51, pp. 1909–22.10.1016/S1359-6454(02)00597-9 ↗
3. S. Gorsse and D.B. Miracle: Acta Mater., 2003, vol. 51, pp. 2427–42.10.1016/S1359-6454(02)00510-4 ↗
4. S.L. Wei, L.J. Huang, X.T. Li, Y. Jiao, W. Ren and L. Geng: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 3629-45.10.1007/s11661-019-05244-7 ↗
5. W.J. Lu, D. Zhang, X.N. Zhang, R.J. Wu, T. Sakata and H. Mori: Scripta Mater., 2001, vol. 44, pp. 2449–55.10.1016/S1359-6462(01)00926-5 ↗
6. W.J. Lu, X.L. Guo, J.L. Meng, F.Q. Wang, L.Q. Wang and D. Zhang: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3490-3501.
7. L. Xiao, W.J. Lu, J.N. Qin, Y.F. Chen, D. Zhang, M.M. Wang, F. Zhu and B. Ji: Compos. Sci. Technol., 2009, vol. 69, pp. 1925-31.10.1016/j.compscitech.2009.04.009 ↗
8. Z.F. Yang, W.J. Lu, J.N. Qin, J.J. Gu, D. Zhang and J.L. Liu: J. Alloys Compd., 2006, vol. 425, pp. 379-83.10.1016/j.jallcom.2006.01.045 ↗
9. V. de Castro, T. Leguey, A. Muñoz, M.A. Monge and R. Pareja: Mater. Sci. Eng. A, 2006, vol. 422, pp. 189-97.10.1016/j.msea.2006.02.027 ↗
10. R.A. Gaisin, V.M. Imayev and R.M. Imayev: J. Alloys Compd., 2017, vol. 723, pp. 385-94.10.1016/j.jallcom.2017.06.287 ↗
11. M. Ozerov, M. Klimova, V. Sokolovsky, N. Stepanov, A. Popov, M. Boldin and S. Zherebtsov: J. Alloys Compd., 2019, vol. 770, pp. 840-48.10.1016/j.jallcom.2018.08.215 ↗
12. K. Kondoh, T. Threrujirapapong, J. Umeda and B. Fugetsu: Compos. Sci. Technol., 2012, vol. 72, pp. 1291-97.10.1016/j.compscitech.2012.05.002 ↗
13. J.B. Fruhauf, J. Roger, O. Dezellus, S. Gourdet, N. Karnatak, S. Saunier, F. Montheillet and C. Desrayaud: Mater. Sci. Eng. A, 2012, vol. 554, pp. 22-32.10.1016/j.msea.2012.05.096 ↗
14. G.F. Huang, Y.F. Han, X.L. Guo, D. Qiu, L.Q. Wang, W.J. Lu and D. Zhang: Mater. Sci. Eng. A, 2017, vol. 688, pp. 155-63.10.1016/j.msea.2017.02.002 ↗
15. X.L. Guo, L.Q. Wang, M.M. Wang, J.N. Qin, D. Zhang and W.J. Lu: Acta Mater., 2012, vol. 60, pp. 2656-67.10.1016/j.actamat.2012.01.032 ↗
16. T.S. Ghesmati, S.A. Sajjadi, A. Babakhani and W.J. Lu: Mater. Sci. Eng. A, 2015, vol. 624, pp. 271-78.10.1016/j.msea.2014.11.036 ↗
17. S.G. Tabrizi, S.A. Sajjadi, A. Babakhani and W. Lu: J. Alloys Compd., 2017, vol. 692, pp. 734-44.10.1016/j.jallcom.2016.09.026 ↗
18. M. Wang, W. Lu and J. Qin: Scripta Mater., 2005, vol. 53, pp. 265-70.10.1016/j.scriptamat.2005.01.049 ↗
19. S. Roy and S. Suwas: Mater. Sci. Eng. A, 2013, vol. 574, pp. 205-17.10.1016/j.msea.2013.03.013 ↗
20. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–7410.1016/S0921-5093(97)00424-3 ↗
21. D.G. Cram, H.S. Zurob, Y.J.M. Brechet and C.R. Hutchinson: Acta Mater., 2009, vol. 57, pp. 5218-28.10.1016/j.actamat.2009.07.024 ↗
22. S.E. Ion, F.J. Humphreys and S.H. White: Acta Metall., 1982, vol. 30, pp. 1909-19.10.1016/0001-6160(82)90031-1 ↗
23. M.E. Kassner and S.R. Barrabes: Mater. Sci. Eng. A, 2005, vol. 410-411, pp. 152-55.10.1016/j.msea.2005.08.052 ↗
24. S. Balachandran, S. Kumar and D. Banerjee: Acta Mater., 2017, vol. 131, pp. 423–34.10.1016/j.actamat.2017.04.008 ↗
25. S. Zherebtsov, M. Murzinova, G. Salishchev and S.L. Semiatin: Acta Mater., 2011, vol. 59, pp. 4138–50.10.1016/j.actamat.2011.03.037 ↗
26. H. Matsumoto, L. Bin, S.H. Lee, Y. Li, Y. Ono and A. Chiba: Metall. Mater. Trans. A, 2013, vol. 44A, 3245-60.10.1007/s11661-013-1655-5 ↗
27. P.W. Liu, Y.F. Han, P.K. Qiu, F.S. Xu, Y. Chen, L.H. Du, G.F. Huang, J.W. Mao and W.J. Lu: Mater. Charact., 2018, vol. 146, pp. 15-24.10.1016/j.matchar.2018.09.040 ↗
28. W. Lu, L. Xiao and K. Geng: Mater. Charact., 2008, vol. 59, pp. 912-19.10.1016/j.matchar.2007.07.016 ↗
29. V.M. Imayev, R.A. Gaisin and R.M. Imayev: J. Alloys Compd., 2018, vol. 762, pp. 555-564.10.1016/j.jallcom.2018.05.273 ↗
30. Q. Chao, P.D. Hodgson and H. Beladi: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2659-71.10.1007/s11661-014-2205-5 ↗
31. S.F. Li, K. Kondoh, H. Imai, B. Chen, L. Jia, J. Umeda and Y.B. Fu: Mater. Des., 2016, vol. 95, pp. 127-32.10.1016/j.matdes.2016.01.092 ↗
32. S. Grützner, L. Krüger, C. Schimpf, M. Radajewski and I. Schneider: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5671-82.10.1007/s11661-018-4849-z ↗
33. H.L. Cox: Brit. J. Appl. Phys., 1952, vol. 3, pp. 72-79.10.1088/0508-3443/3/3/302 ↗
34. V.C. Nardone and K.M. Prewo: Scripta Matall., 1986, vol. 20, pp. 43-48.10.1016/0036-9748(86)90210-3 ↗
35. V.C. Nardone: Scripta Matall., 1987, vol. 21, pp. 1313-18.10.1016/0036-9748(87)90105-0 ↗
36. L. Xiao, W. Lu, J. Qin, D. Zhang, M. Wang, F. Zhu and B. Ji: J. Mater. Res., 2008, vol. 23, pp. 3066-74.10.1557/JMR.2008.0378 ↗
37. I. Sen, S. Tamirisakandala, D.B. Miracle and U. Ramamurty: Acta Mater., 2007, vol. 55, pp. 4983-93.10.1016/j.actamat.2007.05.009 ↗
38. D. Hill, R. Banerjee, D. Huber, J. Tiley and H.L. Fraser: Scripta Mater., 2005, vol. 52, pp. 387-92.10.1016/j.scriptamat.2004.10.019 ↗
39. G. Lutjering: Mater. Sci. Eng. A, 1998, vol. 243, pp. 32-45.10.1016/S0921-5093(97)00778-8 ↗
40. Y.B. Chun, M. Battaini, C.H.J. Davies and S.K. Hwang: Metall. Mater. Trans. A, 2010, vol. 41, pp. 3473-87.10.1007/s11661-010-0410-4 ↗
41. C.K. Yan, A.H. Feng, S.J. Qu, G.J. Cao, J.L. Sun, J. Shen and D.L. Chen: Acta Mater., 2018, vol. 154, pp. 311-24.10.1016/j.actamat.2018.05.057 ↗
42. S. Balachandran, A. Kashiwar, A. Choudhury, D. Banerjee, R. Shi and Y. Wang: Acta Mater., 2016, vol. 106, pp. 374-87.10.1016/j.actamat.2016.01.023 ↗
43. N. Stanford and P.S. Bate: Acta Mater., 2004, vol. 52, pp. 5215-24.10.1016/j.actamat.2004.07.034 ↗
44. G.C. Obasi, S. Birosca, D.G.L. Prakash, J.Q. da Fonseca and M. Preuss: Acta Mater., 2012, vol. 60, pp. 6013-24.10.1016/j.actamat.2012.07.025 ↗
45. T. Sakai, A.B. Akov, R. Kaibyshev, H. Miura and J.J. Jonas: Prog. Mater. Sci., 2014, vol. 60, pp. 130-207.10.1016/j.pmatsci.2013.09.002 ↗
46. C.J. Zhang, J.P. Qu, J. Wu, S.Z. Zhang, J.C. Han, M.D. Hayat and P. Cao: Mater. Lett., 2018, vol. 233, pp. 242-45.10.1016/j.matlet.2018.09.012 ↗
47. J.D. Robson, D.T. Henry and B. Davis: Acta Mater., 2009, vol. 57, pp. 2739–47.10.1016/j.actamat.2009.02.032 ↗
48. J.D. Robson, D.T. Henry and B. Davis: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4239-47.10.1016/j.msea.2011.02.030 ↗
49. E.V. Pereloma, P. Mannan, G. Casillas and A.A. Saleh: Mater. Charact., 2017, vol. 125, pp. 94-98.10.1016/j.matchar.2017.01.026 ↗
50. W. Xu, M. Ferry, J.M. Cairney and F.J. Humphreys: Acta Mater., 2007, vol. 55, pp. 5157–67.10.1016/j.actamat.2007.05.045 ↗
51. A. Rollett, F. Humphreys, G.S. Rohrer and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier Ltd., Oxford, UK, 2004, pp. 451-67.
52. F.J. Humphreys and P.N. Kalu: Acta Metall., 1987, vol. 35, pp. 2815-29.10.1016/0001-6160(87)90281-1 ↗
53. S. Gourdet and F. Montheillet: Acta Mater., 2003, vol. 51, pp. 2685-99.10.1016/S1359-6454(03)00078-8 ↗
54. M.G. Jiang, C. Xu, H. Yan, G.H. Fan, T. Nakata, C.S. Lao, R.S. Chen, S. Kamado, E.H. Han and B.H. Lu: Acta Mater., 2018, vol. 157, pp. 53-71.10.1016/j.actamat.2018.07.014 ↗
55. R.L. Goetz: Scripta Mater., 2005, vol. 52, pp. 851-56.10.1016/j.scriptamat.2005.01.012 ↗
56. Y.C. Yoo, J.S. Jeon and H.I. Lee: Compos. Sci. Technol., 1997, vol. 57, pp. 651-54.10.1016/S0266-3538(97)00010-9 ↗
57. P. Cavaliere and E. Evangelista: Compos. Sci. Technol., 2006, vol. 66, pp. 357-62.10.1016/j.compscitech.2005.04.047 ↗