journal article·2019-11

The Anisotropy of Serrated Flow Behavior of Al-Cu-Li (AA2198) Alloy

Niraj Nayan, S. V. S. Narayana Murty, Rajdeep Sarkar, A. K. Mukhopadhyay, Sarita Ahlawat, S. K. Sarkar, M. J. N. V. Prasad, I. Samajdar

Publisher page

Abstract

The serrations in tensile stress–strain curves for Al-Cu-Li-based AA2198 alloy sheets were studied in various temper conditions. The alloy exhibited typical Portevin-Le-Chatelier effects with intense serrations in the stress–strain curves. This was observed in the solution-treated condition, while the intensity and frequency of serrations decreased upon aging. Detailed microscopic examination together with thermal stability studies showed the absence of δ′ (i.e., metastable Al3Li) precipitate in the alloy. As a result, the shearing of δ’ precipitates by dislocations during plastic deformation did not occur in the present alloy. The quasistatic tensile testing as a function of test temperature, strain rate and temper condition and the acoustic emission study confirmed that the combined interaction of copper and lithium atoms with mobile dislocations is the underlying mechanism for the plastic instability in this alloy. The alloy displayed significant anisotropic behavior in terms of mechanical properties and serration characteristics, and these observations are related to the difference in the effective grain size of the samples in various orientations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. RC Picu, G Vincze, F Ozturk, JJ Gracio, F Barlat and AM Maniatty, Materials Science and Engineering: A 2005, vol. 390, pp. 334-343.10.1016/j.msea.2004.08.029 ↗
2. YZ Shen, KH Oh and DN Lee, Materials Science and Engineering: A 2006, vol. 435, pp. 343-354.10.1016/j.msea.2006.07.058 ↗
3. A Portevin and F Le Chatelier, Comptes Rendus de l’Académie des Sciences Paris 1923, vol. 176, pp. 507-510.
4. Ahmet Yilmaz, Science and technology of advanced materials 2011, vol. 12, p. 063001.10.1088/1468-6996/12/6/063001 ↗
5. Győző Horváth, Nguyen Q Chinh, Jenő Gubicza and János Lendvai, Materials Science and Engineering: A 2007, vol. 445, pp. 186-192.10.1016/j.msea.2006.09.019 ↗
6. Alexis Deschamps, Benjamin Decreus, Frederic De Geuser, Thomas Dorin and Matthew Weyland, Acta Materialia 2013, vol. 61, pp. 4010-4021.10.1016/j.actamat.2013.03.015 ↗
7. Andrzej Dziadoń, Scripta materialia 1996, vol. 34, pp. 375-380.10.1016/S0956-716X(95)00537-6 ↗
8. Zs Kovács, D Fátay, K Nyilas and J Lendvai, Journal of engineering materials and technology 2002, vol. 124, pp. 23-26.10.1115/1.1420195 ↗
9. XM Cheng and JG Morris, Scripta Materialia 2000, vol. 43, pp. 651-658.10.1016/S1359-6462(00)00474-7 ↗
10. D Thevenet, M Mliha-Touati and A Zeghloul, Materials Science and Engineering: A 1999, vol. 266, pp. 175-182.10.1016/S0921-5093(99)00029-5 ↗
11. Egidio Rizzi and Peter Hähner, International Journal of Plasticity 2004, vol. 20, pp. 121-165.10.1016/S0749-6419(03)00035-4 ↗
12. H Dierke, F Krawehl, S Graff, S Forest, J Šachl and H Neuhäuser, Computational Materials Science 2007, vol. 39, pp. 106-112.10.1016/j.commatsci.2006.03.019 ↗
13. GJ Fan, GY Wang, H Choo, PK Liaw, YS Park, BQ Han and EJ Lavernia, Scripta Materialia 2005, vol. 52, pp. 929-933.10.1016/j.scriptamat.2004.12.028 ↗
14. Huifeng Jiang, Qingchuan Zhang, Xuedong Chen, Zhongjia Chen, Zhenyu Jiang, Xiaoping Wu and Jinghong Fan, Acta Materialia 2007, vol. 55, pp. 2219-2228.10.1016/j.actamat.2006.10.029 ↗
15. A Chatterjee, A Sarkar, P Barat, P Mukherjee and N Gayathri, Materials Science and Engineering: A 2009, vol. 508, pp. 156-160.10.1016/j.msea.2008.12.030 ↗
16. E.O. Hall: Yield point phenomena in metals and alloys. Springer, Berlin, 2012.
17. JM Gentzbittel and R Fougeres, Scripta metallurgica 1987, vol. 21, pp. 1411-1416.10.1016/0036-9748(87)90274-2 ↗
18. JT Evans, Scripta metallurgica 1987, vol. 21, pp. 1435-1438.10.1016/0036-9748(87)90278-X ↗
19. PJ Gregson, DS McDarmaid and E Hunt, Materials science and technology 1988, vol. 4, pp. 713-718.10.1179/mst.1988.4.8.713 ↗
20. JC Huang and GT Gray, Scripta metallurgica et materialia 1990, vol. 24, pp. 85-90.10.1016/0956-716X(90)90571-W ↗
21. Subodh Kumar, Janusz Król and Erwin Pink, Scripta Materialia 1996, vol. 35, pp. 775-780.10.1016/1359-6462(96)00218-7 ↗
22. M Cieslar, P Vostrý and I Stulíková, Phys. Status Solidi (a) 1996, vol. 157, pp. 217-227.10.1002/pssa.2211570203 ↗
23. F Chmelık, E Pink, J Król, J Balık, J Pešička and P Lukáč, Acta Materialia 1998, vol. 46, pp. 4435-4442.10.1016/S1359-6454(98)00070-6 ↗
24. Erwin Pink, Subodh Kumar and Baohui Tian, Materials Science and Engineering: A 2000, vol. 280, pp. 17-24.10.1016/S0921-5093(99)00650-4 ↗
25. DL Sun, DZ Yang and TQ Lei, Materials Chemistry and Physics 1990, vol. 25, pp. 307-313.10.1016/0254-0584(90)90075-L ↗
26. S Kumar and HB McShane, Scripta metallurgica et materialia 1993, vol. 28, pp. 1149-1154.10.1016/0956-716X(93)90025-N ↗
27. S Kumar and E Pink, Acta Materialia 1997, vol. 45, pp. 5295-5301.10.1016/S1359-6454(97)00149-3 ↗
28. SJ Zambo and JA Wert, Scripta metallurgica et materialia 1993, vol. 29, pp. 1523-1528.10.1016/0956-716X(93)90271-S ↗
29. H. Ovri and E. T. Lilleodden, Acta Materialia 2015, vol. 89, pp. 88-97.10.1016/j.actamat.2015.01.065 ↗
30. LP Kubin, A Styczynski and Y Estrin, Scripta metallurgica et materialia 1992, vol. 26, pp. 1423-1428.10.1016/0956-716X(92)90660-7 ↗
31. Subodh Kumar, Scripta metallurgica et materialia 1995, vol. 33, pp. 81-86.10.1016/0956-716X(95)00099-H ↗
32. BH Tian, YG Zhang and CQ Chen, Materials Science and Engineering: A 1998, vol. 254, pp. 227-233.10.1016/S0921-5093(98)00692-3 ↗
33. F Zeides and I Roman, Scripta metallurgica et materialia 1990, vol. 24, pp. 1919-1922.10.1016/0956-716X(90)90051-H ↗
34. N Ilić, DJ Drobnjak, V Radmilović, MT Jovanović and D Marković, Scripta materialia 1996, vol. 34, pp. 1123-1130.10.1016/1359-6462(95)00627-3 ↗
35. AK Vasudevan, WG Fricke, RC Malcolm, RJ Bucci, MA Przystupa and F Barlat, Metallurgical Transactions A 1988, vol. 19, pp. 731-732.10.1007/BF02649289 ↗
36. KK Cho, YH Chung, CW Lee, SI Kwun and MC Shin, Scripta Materialia 1999, vol. 40, pp. 651-657.10.1016/S1359-6462(98)00481-3 ↗
37. A. Cho, Z. Long, B. Lisagor, T. Bales, M.S. Domack, J.A. Wagner: in Materials Science Forum, Trans Tech Publ, 2006, pp. 1585–1590.10.4028/www.scientific.net/MSF.519-521.1585 ↗
38. R. Shabadi, S. Kumar, H. J. Roven, E.S. Dwarakadasa, Mater. Sci. Eng. A 2004, vol. 382, pp. 203-208.10.1016/j.msea.2004.04.079 ↗
39. J Mizera and KJ Kurzydlowski, Scripta Materialia 2001, vol. 45, pp. 801-806.10.1016/S1359-6462(01)01099-5 ↗
40. A Deschamps, M Garcia, J Chevy, B Davo and F De Geuser, Acta Materialia 2017, vol. 122, pp. 32-46.10.1016/j.actamat.2016.09.036 ↗
41. PJ Gregson, HM Flower, CNJ Tite and AK Mukhopadhyay, Materials science and technology 1986, vol. 2, pp. 349-353.10.1179/mst.1986.2.4.349 ↗
42. AK Jena, AK Gupta and MC Chaturvedi, Acta Metallurgica 1989, vol. 37, pp. 885-895.10.1016/0001-6160(89)90015-1 ↗
43. H.H. Jo and K.-I. Hirano, in Materials Science Forum, Trans Tech Publ, 1987, pp. 377–382.
44. AK Mukhopadhyay, GJ Shiflet and EA Starke Jr, Scripta Metallurgica et Materialia 1990, vol. 24, pp. 307-312.10.1016/0956-716X(90)90261-E ↗
45. G Sha, RKW Marceau, X Gao, BC Muddle and SP Ringer, Acta Materialia 2011, vol. 59, pp. 1659-1670.10.1016/j.actamat.2010.11.033 ↗
46. L Kovarik, SA Court, HL Fraser and MJ Mills, Acta Materialia 2008, vol. 56, pp. 4804-4815.10.1016/j.actamat.2008.05.042 ↗
47. N. Nayan, S.V.S. NarayanaMurty, A.K. Mukhopadhyay, K.S. Prasad, A.K. Jha, B. Pant, S.C. Sharma, K.M. George, Mater. Sci. Eng. A 2013, vol. 585, pp. 475-479.10.1016/j.msea.2013.08.001 ↗
48. B Decreus, A Deschamps, F De Geuser, P Donnadieu, C Sigli and M Weyland, Acta Materialia 2013, vol. 61, pp. 2207-2218.10.1016/j.actamat.2012.12.041 ↗
49. Thomas Dorin, Alexis Deschamps, Frédéric De Geuser, Williams Lefebvre and Christophe Sigli, Philosophical Magazine 2014, vol. 94, pp. 1012-1030.10.1080/14786435.2013.878047 ↗
50. WM Webernig, E Pink and J Krol, Zeitschrift fuer Metallkunde 1986, vol. 77, pp. 188-192.
51. NQ Chinh, F Csikor, Z Kovács J Lendvai, J. Mater. Res., 2000, vol. 15, pp. 1037-1040.10.1557/JMR.2000.0147 ↗
52. Avraham Rosen, Materials Science and Engineering 1971, vol. 7, pp. 191-202.10.1016/0025-5416(71)90145-5 ↗
53. CR Heiple and SH Carpenter, Journal of Acoustic Emission 1987, vol. 6, pp. 177-204.
54. CR Heiple, SH Carpenter and MJ Carr, Metal Science 1981, vol. 15, pp. 587-598.10.1179/msc.1981.15.11-12.587 ↗
55. CH Caceres and AH Rodriguez, Acta Metallurgica 1987, vol. 35, pp. 2851-2864.10.1016/0001-6160(87)90284-7 ↗
56. F Chmelik, Z Trojanova, Z Převorovský and P Lukáč, Materials Science and Engineering: A 1993, vol. 164, pp. 260-265.10.1016/0921-5093(93)90674-4 ↗
57. PG McCormick, Philosophical Magazine 1971, vol. 23, pp. 949-956.10.1080/14786437108216997 ↗