Formation of Iron-Rich Intermetallic Phases in Al-7Si-Mg: Influence of Cooling Rate and Strontium Modification
Source abstract
Abstract
Abstract The influence of cooling rate on the formation of iron-rich intermetallic phases during solidification of unmodified and strontium-modified Al-7Si-0.3Mg alloys has been investigated. The effect of strontium on the intermetallic phases was evaluated in unquenched and quenched samples. Samples were quenched before the start of the Al-Si eutectic reaction, along the Al-Si eutectic reaction and just after the end of solidification. The results show that the addition of strontium increased the size of both β-Al5FeSi and π-Al8FeMg3Si6 at low cooling rates. For unmodified and strontium-modified alloys, an increase of cooling rate resulted in a decrease in size of the intermetallic phases, particularly in the strontium modified alloy. In the strontium modified alloy quenched before the start of the Al-Si eutectic reaction, π-Al8FeMg3Si6 appeared as thin platelets at the eutectic cell boundaries. Chinese script-like π-Al8FeMg3Si6 and platelet-like β-Al5FeSi intermetallic phases were observed uniformly distributed in the eutectic regions in the unmodified alloy quenched before the start of the eutectic reaction. Strontium modified semi-solid Al-7Si-0.3Mg castings were produced and the type of intermetallic phase, morphology, size, area fraction and distribution were similar to that observed in the strontium modified alloy quenched before the start of the Al-Si eutectic reaction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. L.F. Mondolfo: Aluminium Alloys: Structure and Properties, 1976.10.1016/B978-0-408-70932-3.50008-5 ↗
2. B. Zhang, D.R. Poirier, and W. Chen: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2659–66.10.1007/s11661-999-0306-3 ↗
3. S. Dezecot and M. Brochu: Int. J. Fatigue, 2015, vol. 77, pp. 154–9.10.1016/j.ijfatigue.2015.03.004 ↗
4. M. Blad, B. Johannesson, P. Nordberg, and J. Winklhofer: in Semi-Solid Processing of Alloys and Composites XIV, vol. 256, Trans Tech Publications, 2016, pp. 328–33.10.4028/www.scientific.net/SSP.256.328 ↗
5. X.G. Hu, Q. Zhu, S.P. Midson, H.V. Atkinson, H.B. Dong, F. Zhang, and Y.L. Kang: Acta Mater., 2017, vol. 124, pp. 446–55.10.1016/j.actamat.2016.11.032 ↗
6. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 73–84.10.1016/S1471-5317(00)00008-0 ↗
7. H.R. Ammar, A.M. Samuel, and F.H. Samuel: Mater. Sci. Eng. A, 2008, vol. 473, pp. 65–75.10.1016/j.msea.2007.03.112 ↗
8. Q.G. Wang, D. Apelian, and D.A. Lados: J. Light Met., 2001, vol. 1, pp. 85–97.10.1016/S1471-5317(00)00009-2 ↗
9. J.Z. Yi, Y.X. Gao, P.D. Lee, and T.C. Lindley: Mater. Sci. Eng. A, 2004, vol. 386, pp. 396–407.10.1016/S0921-5093(04)00964-5 ↗
10. R. Chen, Q. Xu, H. Guo, Z. Xia, Q. Wu, and B. Liu: Mater. Sci. Eng. A, 2017, vol. 685, pp. 391–402.10.1016/j.msea.2016.12.051 ↗
11. M. Yildirim and D. Özyürek: Mater. Des., 2013, vol. 51, pp. 767–74.10.1016/j.matdes.2013.04.089 ↗
12. M. V. Kral, H.R. McIntyre, and M.J. Smillie: Scr. Mater., 2004, vol. 51, pp. 215–9.10.1016/j.scriptamat.2004.04.015 ↗
13. M. V. Kral, P.N.H. Nakashima, and D.R.G. Mitchell: Metall. Mater. Trans. A, 2006, vol. 37, pp. 1987–97.10.1007/s11661-006-0141-8 ↗
14. M. V. Kral: Mater. Lett., 2005, vol. 59, pp. 2271–6.10.1016/j.matlet.2004.05.091 ↗
15. M. Timpel, N. Wanderka, B.S. Murty, and J. Banhart: Acta Mater., 2010, vol. 58, pp. 6600–8.10.1016/j.actamat.2010.08.021 ↗
16. J.M. Yu, N. Wanderka, G. Miehe, and J. Banhart: Intermetallics, 2016, vol. 72, pp. 53–61.10.1016/j.intermet.2016.02.003 ↗
17. J.M. Yu, N. Wanderka, A. Rack, R. Daudin, E. Boller, H. Markötter, A. Manzoni, F. Vogel, T. Arlt, I. Manke, and J. Banhart: Acta Mater., 2017, vol. 129, pp. 194–202.10.1016/j.actamat.2017.02.048 ↗
18. M. Timpel, N. Wanderka, R. Grothausmann, and J. Banhart: J. Alloys Compd., 2013, vol. 558, pp. 18–25.10.1016/j.jallcom.2012.12.009 ↗
19. W. Khalifa, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. A, 2003, vol. 34, pp. 807–25.10.1007/s11661-003-1009-9 ↗
20. Y.S. Choi, J.S. Lee, W.T. Kim, and H.Y. Ra: J. Mater. Sci., 1999, vol. 34, pp. 2163–8.10.1023/A:1004584415196 ↗
21. Y.H. Cho, H.C. Lee, K.H. Oh, and A.K. Dahle: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1009–10.
22. A.M. Samuel, A. Pennors, C. Villeneuve, F.H. Samuel, H.W. Doty, and S. Valtierra: Int. J. Cast Met. Res., 2000, vol. 13, pp. 231–53.10.1080/13640461.2000.11819406 ↗
23. A.M. Samuel, F.H. Samuel, and H.W. Doty: J. Mater. Sci., 1996, vol. 31, pp. 5529–39.10.1007/BF01159327 ↗
24. X. Cao and J. Campbell: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1409–20.10.1007/s11661-003-0253-3 ↗
25. J. Campbell: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1009–10.10.1007/s11661-009-9804-6 ↗
26. C. Puncreobutr, A.B. Phillion, J.L. Fife, P. Rockett, A.P. Horsfield, and P.D. Lee: Acta Mater., 2014, vol. 79, pp. 292–303.10.1016/j.actamat.2014.07.018 ↗
27. Q.G. Wang and C.J. Davidson: J. Mater. Sci., 2001, vol. 36, pp. 739–50.10.1023/A:1004801327556 ↗
28. B. Closset and J.E. Gruzleski: Metall. Mater. Trans. A, 1982, vol. 13, pp. 945–51.10.1007/BF02643389 ↗
29. Q. Tang, J. Zhao, T. Wang, J. Chen, and K. He: J. Alloys Compd., 2018, vol. 741, pp. 161–73.10.1016/j.jallcom.2018.01.138 ↗
30. D. Casari, T.H. Ludwig, M. Merlin, L. Arnberg, and G.L. Garagnani: Mater. Sci. Eng. A, 2014, vol. 610, pp. 414–26.10.1016/j.msea.2014.05.059 ↗
31. E. Sjölander and S. Seifeddine: Metall. Mater. Trans. A, 2014, vol. 45, pp. 1916–27.10.1007/s11661-013-2141-9 ↗
32. K.Y. Wen, W. Hu, and G. Gottstein: Mater. Sci. Technol., 2003, vol. 19, pp. 762–8.10.1179/026708303225002839 ↗
33. S. Menargues, E. Martín, M.T. Baile, and J.A. Picas: Mater. Sci. Eng. A, 2015, vol. 621, pp. 236–42.10.1016/j.msea.2014.10.078 ↗
34. B. Mingo, R. Arrabal, A. Pardo, E. Matykina, and P. Skeldon: Mater. Charact., 2016, vol. 112, pp. 122–8.10.1016/j.matchar.2015.12.006 ↗
35. J.A. Taylor, J. Barresi, M.J. Couper, and D.H. StJohn: in Aluminium Alloys—Their Physical and Mechanical Properties, vol. 331, Trans Tech Publications, 2000, pp. 277–82.10.4028/www.scientific.net/MSF.331-337.277 ↗
36. E.A. Elsharkawi, E. Samuel, A.M. Samuel, and F.H. Samuel: J. Mater. Sci., 2010, vol. 45, pp. 1528–39.10.1007/s10853-009-4118-z ↗
37. G. Gustafsson, T. Thorvaldssons, and G.L. Dunlop: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 45–52.10.1007/BF02644441 ↗
38. J.A. Taylor: Procedia Mater. Sci., 2012, vol. 1, pp. 19–33.10.1016/j.mspro.2012.06.004 ↗
39. L. Bäckerud, G. Chai, and J. Tamminen: Solidification Characteristics of Aluminum Alloys, Volume 2: Foundry Alloys, AFS/SKANALUMINIUM, Stockholm, 1990.
40. J.M. Yu, N. Wanderka, A. Rack, R. Daudin, E. Boller, H. Markötter, A. Manzoni, F. Vogel, T. Arlt, I. Manke, and J. Banhart: J. Alloys Compd., 2018, vol. 766, pp. 818–27.10.1016/j.jallcom.2018.06.372 ↗
41. İ. Öztürk, G. Hapçı Ağaoğlu, E. Erzi, D. Dispinar, and G. Orhan: J. Alloys Compd., 2018, vol. 763, pp. 384–91.10.1016/j.jallcom.2018.05.341 ↗
42. O. Granath, M. Wessén, and H. Cao: Int. J. Cast Met. Res., 2008, vol. 21, pp. 349–56.10.1179/136404608X320706 ↗
43. ASTM E562—11: ASTM Int., 2011, pp. 1–7.
44. G.L. Brollo, C.T.W. Proni, L.C. de Paula, and E.J. Zoqui: Thermochim. Acta, 2017, vol. 651, pp. 22–33.10.1016/j.tca.2017.02.010 ↗
45. S.D. McDonald, K. Nogita, and A.K. Dahle: Acta Mater., 2004, vol. 52, pp. 4273–80.10.1016/j.actamat.2004.05.043 ↗
46. A.K. Dahle, K. Nogita, J.W. Zindel, S.D. McDonald, and L.M. Hogan: Metall. Mater. Trans. A, 2001, vol. 32, pp. 949–60.10.1007/s11661-001-0352-y ↗
47. C.H. Caceres, C.J. Davidson, Q.G. Wang, and J.R. Griffiths: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2611–8.10.1007/s11661-999-0301-8 ↗
48. N.A. Belov, D.G. Eskin, and A.A. Aksenov: Multicomponent Phase Diagrams: Applications for Commercial Aluminum Alloys, Elsevier B.V., 2005.
49. L. Lu and A.K. Dahle: Metall. Mater. Trans. A, 2005, vol. 36, pp. 819–35.
50. M. Tebib, A.M. Samuel, F. Ajersch, and X.G. Chen: Mater. Charact., 2014, vol. 89, pp. 112–23.10.1016/j.matchar.2014.01.005 ↗
51. W. Khalifa, F.H. Samuel, J.E. Gruzleski, H.W. Doty, and S. Valtierra: Metall. Mater. Trans. A, 2005, vol. 36, pp. 1017–32.10.1007/s11661-005-0295-9 ↗
52. L. Liu, A.M.A. Mohamed, A.M. Samuel, F.H. Samuel, H.W. Doty, and S. Valtierra: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2457–69.10.1007/s11661-009-9944-8 ↗
53. F.H. Samuel, A.M. Samuel, P. Ouellet, and H.W. Doty: Metall. Mater. Trans. A, 1998, vol. 29, pp. 2871–84.10.1007/s11661-998-0194-y ↗
54. S.D. McDonald, A.K. Dahle, J.A. Taylor, and D.H. StJohn: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1829–37.10.1007/s11661-004-0091-y ↗