journal article·2018-06

Synthesis and Characterization of Yttria-Stabilized Zirconia Nanoparticles Doped with Ytterbium and Gadolinium: ZrO2 9.5Y2O3 5.6Yb2O3 5.2Gd2O3

M. Bahamirian, S. M. M. Hadavi, M. R. Rahimipour, M. Farvizi, A. Keyvani

Publisher page

Abstract

Defect cluster thermal barrier coatings (TBCs) are attractive alternatives to Yttria-stabilized zirconia (YSZ) in advanced applications. In this study, YSZ nanoparticles doped with ytterbium and gadolinium (ZrO2 9.5Y2O3 5.6Yb2O3 5.2Gd2O3 (ZGYbY)) were synthesized through a chemical co-precipitation and calcination method, and characterized by in situ high-temperature X-ray diffraction analysis in the temperature range of 25 °C to 1000 °C (HTK-XRD), thermogravimetric analysis, differential thermal analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM). Precise cell parameters of t-prime phase and the best zirconia phase for TBC applications were calculated by Cohen’s and Rietveld refinement methods. Optimum crystallization temperature of the precursor powder was found to be 1000 °C. Furthermore, FE-SEM results for the calcined ZGYbY powders indicated orderly particles of uniform shape and size with a small tendency toward agglomeration. Average lattice thermal expansion coefficient in the temperature range of 25 °C to 1000 °C was determined to be 31.71 × 10−6 K−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Catalytic Processes in Materials Science · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. R. Rajendran, Eng. Failure Anal., 2012, vol. 26, pp. 355-369.10.1016/j.engfailanal.2012.07.007 ↗
2. H. Xu and H. Guo, Thermal Barrier Coatings, Woodhead Publishing Limited, Cambridge, 2011, pp. 25-45.10.1533/9780857090829 ↗
3. R. Vaßen, M. O. Jarligo, T. Steinke, D. E. Mack, and D. Stöver, Surf. Coat. Technol., 2010, vol. 205, pp. 938-942.10.1016/j.surfcoat.2010.08.151 ↗
4. S. Bose, High Temperature Coatings, 2nd ed. Butterworth-Heinemann, Oxford, 2011, pp. 155-232.
5. B. Gleeson, J. Propul. Power, vol. 22, pp. 375-383, 2006.10.2514/1.20734 ↗
6. M. Hajizadeh-Oghaz, R. S. Razavi, and M. R. Loghman-Estarki, J. Sol-Gel Sci. Technol., 2014, vol. 70, pp. 6-13.10.1007/s10971-014-3266-z ↗
7. X. Cao, R. Vassen, and D. Stoever, J. Eur. Ceram. Soc., 2004, vol. 24, pp. 1-10.10.1016/S0955-2219(03)00129-8 ↗
8. A. Loganathan and A. S. Gandhi, Mater. Sci. Eng. A, 2012, vol. 556, pp. 927-935.10.1016/j.msea.2012.07.095 ↗
9. D. Clarke and C. Levi, Annu. Rev. Mater. Res., 2003, vol. 33, pp. 383-417.10.1146/annurev.matsci.33.011403.113718 ↗
10. R. Vassen, X. Cao, F. Tietz, D. Basu, and D. Stöver, J. Am. Ceram. Soc., 2000, vol. 83, pp. 2023-2028.10.1111/j.1151-2916.2000.tb01506.x ↗
11. M. Stiger, N. Yanar, M. Topping, F. Pettit, and G. Meier, Z. Metallkd., 1999, vol. 90, pp. 1069-1078.
12. C. Funke, J. Mailand, B. Siebert, R. Vaβen, and D. Stöver, Surf. Coat. Technol., 1997, vol. 94, pp. 106-11.10.1016/S0257-8972(97)00486-6 ↗
13. S.A. Tsipas, J. Eur. Ceram. Soc., 2010, vol. 30, pp. 61-72.10.1016/j.jeurceramsoc.2009.08.008 ↗
14. J. Xiang, C. Shuhai, J. Huang, W. Liang, C. Yanjun, W. Ruijun, J. Rare Earths, 2012, vol. 30, pp. 228-232.10.1016/S1002-0721(12)60028-3 ↗
15. M. R. Loghman-Estarki, M. Hajizadeh-Oghaz, H. Edris, and R. S. Razavi, Cryst. Eng. Comm., 2013, vol. 15, pp. 5898-5909.10.1039/c3ce40288f ↗
16. T. Chraska, A. H. King, and C. C. Berndt, Mater. Sci. Eng. A, 2000, vol. 286, pp. 169-178.10.1016/S0921-5093(00)00625-0 ↗
17. H. Scott, J. Mater. Sci., 1975, vol. 10, pp. 1527-1535.10.1007/BF01031853 ↗
18. T. Sakuma, Key Eng. Mater., 1998, vol. 153-154, pp. 75-96.10.4028/www.scientific.net/KEM.153-154.75 ↗
19. E. H. Kisi and C. Howard, Key Eng. Mater., 1998, vol. 153-154, pp. 1-36.10.4028/www.scientific.net/KEM.153-154.1 ↗
20. C. Viazzi, J.-P. Bonino, F. Ansart, and A. Barnabé, J. Alloys Compd., 2008, vol. 452, pp. 377-383.10.1016/j.jallcom.2006.10.155 ↗
21. C. G. Levi, Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 77-91.10.1016/j.cossms.2004.03.009 ↗
22. E. Bakan and R. Vaßen, J. Therm. Spray Technol., 2017, vol. 26, pp. 992-1010.10.1007/s11666-017-0597-7 ↗
23. D. Zhu, Y. L. Chen, and R. A. Miller, NASA/TM, 2004, 212480.
24. N. P. Padture, Nat. Mater., 2016, vol. 15, pp. 804-809.10.1038/nmat4687 ↗
25. S.-H. Jung, Z. Lu, Y.-G. Jung, D. Song, U. Paik, B.-G. Choi, Surf. Coat. Technol., 2017, vol. 323, pp. 39-48.10.1016/j.surfcoat.2016.09.032 ↗
26. Sulzer Metco, Material Product Data Sheet: Zirconia Gadolinia Ytterbia Yttria Agglomerated and Sintered Thermal Spray Powder, 2015, DSMTS-0099.4.
27. L. Tan, L. Zhao, S. Guo, E. Khosravi, and S. Yang, TMS2013 Supplemental Proceedings, 2013, pp. 335–42.10.1002/9781118663547.ch42 ↗
28. A. Keyvani and M. Bahamirian, Mater. Res. Express, 2016, vol. 3, pp.1-12.10.1088/2053-1591/3/10/105047 ↗
29. A. Keyvani and M. Bahamirian, Surf. Eng., 2017, vol. 33 (6), pp. 433-443.10.1080/02670844.2016.1267423 ↗
30. E. Muccillo, E. Souza, and R. Muccillo, J. Alloys Compd., 2002, vol. 344, pp. 175-178.10.1016/S0925-8388(02)00335-3 ↗
31. R. Juarez, D. Lamas, G. Lascalea, and N. W. De Reca, J. Eur. Ceram. Soc., 2000, vol. 20, pp. 133-138.10.1016/S0955-2219(99)00146-6 ↗
32. V. V. Srdić, M. Winterer, and H. Hahn, J. Am. Ceram. Soc., 2000, vol. 83, pp. 729-736.10.1111/j.1151-2916.2000.tb01266.x ↗
33. B. D. Cullity and J. W. Weymouth, Am. J. Phys., 1957, vol. 25, pp. 394-395.10.1119/1.1934486 ↗
34. J. I. Langford and A. Wilson, J. Appl. Crystallogr., 1978, vol. 11, pp. 102-13.10.1107/S0021889878012844 ↗
35. G. Socrates, Infrared and Raman characteristic group frequencies: tables and charts, 3rd ed., John Wiley & Sons, Chichester, 2004, pp. 95-98.
36. A. Ortiz, J. Alonso, and E. Haro-Poniatowski, J. Electron. Mater., 2005, vol. 34, pp. 150-155.10.1007/s11664-005-0226-y ↗
37. I. Kosacki, V. Petrovsky, H. U. Anderson, and P. Colomban, J. Am. Ceram. Soc., 2002, vol. 85, pp. 2646-2650.10.1111/j.1151-2916.2002.tb00509.x ↗
38. A. Naumenko, N. Berezovska, M. Biliy, and O. Shevchenko, Phys. Chem. Solid State, 2008, vol. 9, pp. 121-125.
39. A. Ghosh, A. Suri, M. Pandey, S. Thomas, T. R. Mohan, and B. Rao, Mater. Lett., 2006, vol. 60, pp. 1170-1173.10.1016/j.matlet.2005.10.102 ↗
40. S. Shukla and S. Seal, Int.Mater. Rev., 2005, vol. 50, pp. 45-64.10.1179/174328005X14267 ↗
41. R. Garvie and M. Goss, J. Mater. Sci., 1986, vol. 21, pp. 1253-1257.10.1007/BF00553259 ↗
42. M. Bhagwat and V. Ramaswamy, Mater. Res. Bull., 2004, vol. 39, pp. 1627-1640.10.1016/j.materresbull.2004.05.008 ↗
43. M. Bhagwat, A. Ramaswamy, A. Tyagi, and V. Ramaswamy, Mater. Res. Bull., 2003, vol. 38, pp. 1713-1724.10.1016/S0025-5408(03)00201-0 ↗