journal article·2017-10

Natural Mallow Fiber-Reinforced Epoxy Composite for Ballistic Armor Against Class III-A Ammunition

Lucio Fabio Cassiano Nascimento, Luane Isquerdo Ferreira Holanda, Luis Henrique Leme Louro, Sergio Neves Monteiro, Alaelson Vieira Gomes, Édio Pereira Lima

Publisher page

Abstract

Epoxy matrix composites reinforced with up to 30 vol pct of continuous and aligned natural mallow fibers were for the first time ballistic tested as personal armor against class III-A 9 mm FMJ ammunition. The ballistic efficiency of these composites was assessed by measuring the dissipated energy and residual velocity after the bullet perforation. The results were compared to those in similar tests of aramid fabric (Kevlar™) commonly used in vests for personal protections. Visual inspection and scanning electron microscopy analysis of impact-fractured samples revealed failure mechanisms associated with fiber pullout and rupture as well as epoxy cracking. As compared to Kevlar™, the mallow fiber composite displayed practically the same ballistic efficiency. However, there is a reduction in both weight and cost, which makes the mallow fiber composites a promising material for personal ballistic protection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. M.J.N. Jacobs and J.L.Dingenen: J. Mater Sci.,2001, vol. 36, pp. 3137-42.10.1023/A:1017922000090 ↗
2. P.M. Cunniff: Textile Research J., 1992, vol. 62, pp. 495-501.10.1177/004051759206200902 ↗
3. T. Borvik, M. Langseth, O.S. Hopperstad and K.A. Malo: Int. J. Impact Eng., 1999, vol. 22, pp. 855-85.10.1016/S0734-743X(99)00011-1 ↗
4. S.S. Morye, P.J. Hine, R.A. Duckett, D.J. Carr and I.M. Warf: Compos. Sci. Technol., 2000, vol. 60, pp. 2631-42.10.1016/S0266-3538(00)00139-1 ↗
5. Y.S. Lee, E.D. Wetzel and N.J. Wagner: J. Mater. Sci., 2003, vol. 38, pp. 2825-33.10.1023/A:1024424200221 ↗
6. B.A. Cheeseman and T.A. Bogetti: Composite Structures, 2003, vol.61, pp. 161–73.10.1016/S0263-8223(03)00029-1 ↗
7. B.L. Lee, J.W. Song and J.E.Ward: J. Compos. Mater., 1994, vol. 28, pp. 1202-26.10.1177/002199839402801302 ↗
8. P. Wambua, B. Vangrimde, S. Lomov and I. Verpoest: Composite Structures, 2007, vol. 77, pp. 232-40.10.1016/j.compstruct.2005.07.006 ↗
9. E. Marsyahyo, H.S. Jamasri, B. Rochardjo and N. Soekrisno: Ind. Textiles, 2009, vol. 39, pp. 13-26.10.1177/1528083708098913 ↗
10. A. Ali, Z.R. Shaker, A. Khalina and S.M. Sapuan: Polym Plast Technol Eng., 2011, vol. 50, pp. 622-34.10.1080/03602559.2010.551381 ↗
11. M.H.Z. Abidin, M.A.H. Mohamad, A.M.A. Zaidi and W.A.W. Mat: Appl. Mech. Mater., 2013, vol. 315, pp. 612-15.10.4028/www.scientific.net/AMM.315.612 ↗
12. A.K. Mohanty, M. Misra and L.T. Drzal: J. Polym. Environ., 2002, vol. 10, pp. 19-26.10.1023/A:1021013921916 ↗
13. A.N. Netravali and S. Chabba: Mater Today., 2003, vol. 6, pp. 22-29.10.1016/S1369-7021(03)00427-9 ↗
14. J. Crocker: Mater. Technol., 2008, vol. 2-3, pp. 174-8.10.1179/175355508X373378 ↗
15. S.N. Monteiro, F.P.D. Lopes, A.S. Ferreira and D.C.O. Nascimento: JOM, 2009, vol. 61, pp. 17-22.10.1007/s11837-009-0004-z ↗
16. M.J. John and S. Thomas: Carbohydr. Polym., 2008, vol. 71, pp. 343-64.10.1016/j.carbpol.2007.05.040 ↗
17. S.N. Monteiro, F.P.D. Lopes, A.P. Barbosa, A.B. Bevitori, I.L.A. Silva and L.L.Costa: Met. Mat. Trans. A, 2011, vol. 42A, pp. 2963-74.10.1007/s11661-011-0789-6 ↗
18. O. Faruk, A.K. Bledzki, H.P. Fink and M. Sain: Progr. Polym. Sci. 2012, vol. 37, pp. 1555-96.10.1016/j.progpolymsci.2012.04.003 ↗
19. V.K. Thakur, M.K. Thakur and R.K. Gupta: Intl. J. Polym Anal. Charact., 2014, vol. 19, pp. 256-71.10.1080/1023666X.2014.880016 ↗
20. A. Pappu, V. Patil, S. Jain, A. Mahindrakar, R. Haque, V.K. Thakur: Int. J. Biol. Macromol. 2015, 79, pp. 449-58.10.1016/j.ijbiomac.2015.05.013 ↗
21. O. Güven, S.N. Monteiro, E.A.B. Moura and J.W. Drelich: Polym. Reviews., 2016, vol. 56, pp. 702-36.10.1080/15583724.2016.1176037 ↗
22. J. Holbery and D. Houston: JOM, 2006, vol. 58, pp. 80-6.10.1007/s11837-006-0234-2 ↗
23. R. Zah, R. Hischier, A.L. Leao and I.Braun: J. Clean. Prod., 2007, vol. 15, pp. 1032-40.10.1016/j.jclepro.2006.05.036 ↗
24. N. Thomas, S.A. Paul, L.A. Pothan, B. Deepa. In: Kalia S, Kaith BS, Kaur I, eds: Cellulose Fibers: Bio- and Nano-Polymer Composites, Springer, Berlin, 2011, pp. 3-42.10.1007/978-3-642-17370-7_1 ↗
25. S.N. Monteiro, F.O. Braga, E.P. Lima Jr., L.H.L. Louro and J.W. Drelich, Polym. Eng Sci. 2016, doi:10.1002/pen.24471.10.1002/pen.24471 ↗
26. S.N. Monteiro, T.L. Milanezi, L.H.L. Louro, E.P. Lima Jr., F.O. Braga, A.V. Gomes and J.W. Drelich, Mater. Design, 2016, vol. 96, pp. 263-69.10.1016/j.matdes.2016.02.024 ↗
27. F.S. Da-Luz, E.P. Lima, L.H.L. Louro, S.N. Monteiro, Mater. Res., 2015, vol. 18, pp. 170-77.10.1590/1516-1439.358914 ↗
28. R.B. da Cruz, E.P. Lima Jr., S.N. Monteiro and L.H.L. Louro, Mater. Res., 2015, vol. 18, pp. 70-7510.1590/1516-1439.347514 ↗
29. S.N. Monteiro, L.H.L. Louro, W. Trindade, C.N .Elias, C.L. Ferreira, E.S. Lima, R.P. Weber, J.M. Suarez, A.B.S. Figueiredo, W.A. Pinheiro, L.C. da Silva and E.P. Lima Jr., Metal. Mater. Trans. A, 2015, vol. 46A, pp. 4567-77.10.1007/s11661-015-3032-z ↗
30. L.A. Rohen, F.M. Margem, S.N. Monteiro, C.M.F. Vieira, B.M. Araujo and E.S. Lima, Mater. Res., 2015, vol. 18, pp. 55-62.10.1590/1516-1439.346314 ↗
31. National Institute of Justice: Ballistic Resistance of Body Armor, NIJ, Washington, DC, 2008.
32. S.N. Monteiro, E.P. Lima Jr., L.H.L. Louro, L.C. Silva and J.W. Drelich, Metall. Mat. Trans. A, 2015, vol. 46A, pp. 37–40.10.1007/s11661-014-2678-2 ↗
33. J.I. Margem, F.M. Margem, and S.N. Monteiro: Proceedings of the 67th International Congress of the Brazilian Association for Metallurgy, Materials and Mining, pp. 2341–52, pub. ABM, Rio de Janeiro, 2012.
34. Y.M. Moraes, D.G.D. Ribeiro, F.M. Margem, S.N. Monteiro, and J.I. Margem: Characterization of Minerals, Metals and Materials, pp. 273–8, pub. Wiley, Hoboken, 2016.10.1007/978-3-319-48210-1_33 ↗
35. L.F.C. Nascimento, L.I.F. Holanda, L.H.L. Louro, S.N. Monteiro, A.V. Gomes, and E.P. Lima Jr.: Characterization of Minerals, Metals and Materials, pp. 647–55, pub. Wiley, Hoboken, 2017.10.1007/978-3-319-51382-9_71 ↗
36. K.Y. Lee, A. Delille, and A. Bismarck: Cellulose Fibers: Bio- and Nano Polymer Composites, S. Kalia, B.S. Kaith, and I. Kaur, eds., Springer, Berlin, 2011, pp. 155–78.10.1007/978-3-642-17370-7_6 ↗
37. W.D. Callister, Jr. and D.G. Rethwish, Materials Science and Engineering – An Introduction. 8th ed., Wiley, New York, 2010.