Microstructure and Mechanical Properties of Ultrafine-Grained Austenitic Oxide Dispersion Strengthened Steel
Source abstract
Abstract
316L stainless steel based austenitic oxide dispersion strengthened (AODS) steel was fabricated by mechanical alloying (MA) and hot isostatic pressing (HIP). The AODS sample exhibited an ultrafine-grained (UFG) structure with a bimodal grain size distribution (large grains of about 1200 nm and fine grains of about 260 nm). Two groups of oxide particles were observed; fine Y2Ti2O7 of about 7.7 nm and coarse Cr2O3 particles of about 200 nm in diameter. Tensile tests of the hot-rolled AODS steel samples showed yield strength of up to 890 MPa at room temperature, which is nearly four times higher than that of conventional 316L stainless steel. Micro-indentation and hardness tests indicated even higher yield strength of up to 1200 MPa, which shows a good agreement with the calculated value by combining of the grain refinement strengthening by the Hall–Petch relation and the dispersion strengthening by the Orowan mechanism. The lower strength from tensile tests should be attributed to the formation of micro-cracks at the interfaces between coarse Cr2O3 particles and the matrix. Coarse Cr2O3 particles were also frequently observed inside the fracture surface dimples of the creep ruptured sample at 923 K (650 °C) and 140 MPa. It is thus suggested that the yield strength and elongation could be further improved by controlling the coarse Cr2O3 particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Fusion materials and technologies · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. G.R. Odette, M.J. Alinger and B.D. Wirth: Annu. Rev. Mater. Res., 2008, vol. 38, pp. 471-503.10.1146/annurev.matsci.38.060407.130315 ↗
2. [2] S.J. Zinkle and L.L. Snead: Annu. Rev. Mater. Res., 2014, vol. 44, pp. 241-67.10.1146/annurev-matsci-070813-113627 ↗
3. [3] S. Ukai, S. Mizuta, T. Yoshitake, T. Okuda, M. Fujiwara, S. Hagi and T. Kobayashi: J. Nucl. Mater., 2000, vol. 283-87, pp. 702-06.10.1016/S0022-3115(00)00114-8 ↗
4. [4] R.L. Klueh, J.P. Shingledecker, R.W. Swindeman and D.T. Hoelzer: J. Nucl. Mater., 2005, vol. 341, pp. 103-14.10.1016/j.jnucmat.2005.01.017 ↗
5. [5] A. Kimura, R. Kasada, A. Kohyama, H. Tanigawa, T. Hirose, K. Shiba, S. Jitsukawa, S. Ohtsuka, S. Ukai, M.A. Sokolov, R.L. Klueh, T. Yamamoto and G.R. Odette: J. Nucl. Mater., 2007, vol. 367-70, pp. 60-7.10.1016/j.jnucmat.2007.03.013 ↗
6. [6] M.J. Alinger, G.R. Odette and D.T. Hoelzer: Acta Mater., 2009, vol. 57, pp. 392-406.10.1016/j.actamat.2008.09.025 ↗
7. [7] Y. de Carlan, J.-L. Bechade, P. Dubuisson, J.-L. Seran, P. Billot, A. Bougault, Théodore Cozzika, S. Doriot, D. Hamon, J. Henry, M. Ratti, N. Lochet: J. Nucl. Mater., 2009, vol. 386-88, pp. 430-32.10.1016/j.jnucmat.2008.12.156 ↗
8. C.A. Williams, P. Unifantowicz, N. Baluc, G.D.W Smith and E.A. Marquis: Acta Mater., 2013, vol. 61, pp. 2219-35.10.1016/j.actamat.2012.12.042 ↗
9. R. Rahmanifard, H. Farhangi, A.J. Novinrooz, S. Moniri: Metall. Mater. Trans. A, 2013, vol. 44, pp. 990-8.10.1007/s11661-012-1429-5 ↗
10. M. Nagini, R. Vijay, M. Ramakrishna, A.V. Reddy and G. Sundararajan: Mater. Sci. Eng. A, 2015, vol. 620, pp. 490-9.10.1016/j.msea.2014.10.050 ↗
11. S. Li, Z. Zhou, J. Jang, M. Wang, H. Hu, H. Sun, L. Zou, G. Zhang and L. Zhang: J. Nucl. Mater., 2014, vol. 455, pp. 194-200.10.1016/j.jnucmat.2014.05.061 ↗
12. A.J. London, S. Santra, S. Amirthapandian, B.K. Panigrahi, R.M. Sarguna, S. Balaji, R. Vijay, C.S. Sundar, S. Lozano-Perez, C.R.M. Grovenor: Acta Mater., 2015, vol. 97, pp. 223-33.10.1016/j.actamat.2015.06.032 ↗
13. C. David, B.K. Panigrahi, S. Balaji, A.K. Balamurugan, K.G.M. Nair, G. Amarendra, C.S. Sundar and B. Raj: J. Nucl. Mater., 2008, vol. 383, pp. 132-6.10.1016/j.jnucmat.2008.08.049 ↗
14. [14] E.H. Lee and L.K. Mansur: Philos. Mag. A, 1990, vol. 61, pp. 733-49.10.1080/01418619008231945 ↗
15. [15] A. Etienne, B. Radiguet, N.J. Cunningham, G.R. Odette, R. Valiev and P. Pareige: Ultramicroscopy, 2011, vol. 111, pp. 659-63.10.1016/j.ultramic.2010.12.026 ↗
16. [16] C. Sun, S. Zheng, C.C. Wei, Y. Wu, L. Shao, Y. Yang, et al.: Scientific Reports, 2015, vol. 5, pp. 7801-7801.10.1038/srep07801 ↗
17. [17] C. Sun, K.Y. Yu, J.H. Lee, Y. Liu, H. Wang, L. Shao, S.A. Maloy, K.T. Hartwig, and X. Zhang: J. Nucl. Mater., 2012, vol. 420, pp. 235-40.10.1016/j.jnucmat.2011.10.001 ↗
18. [18] T. Kimoto and H. Shiraishi: J. Nucl. Mater., 1985, vol. 132, pp. 266-76.10.1016/0022-3115(85)90371-X ↗
19. F.J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, 2 nd ed., Pergamon, Oxford, 1995, pp. 335-38.
20. [20] S. Yamashita, N. Akasaka and S. Ohnuki: J. Nucl. Mater., 2004, vol. 329-33, pp. 377-81.10.1016/j.jnucmat.2004.04.041 ↗
21. [21] V. de Castro, M. Briceno, S. Lozano-Perez, P. Trocellier, S.G. Roberts, R. Pareja: J. Nucl. Mater., 2014, vol 455, pp. 157-61.10.1016/j.jnucmat.2014.05.064 ↗
22. [22] J. Ribis and S. Lozano-Perez: J. Nucl. Mater., 2014, vol. 444, pp. 314-22.10.1016/j.jnucmat.2013.10.010 ↗
23. [23] H. Asgharzadeh, H.S. Kim and A. Simchi: Mater. Charact., 2013, vol. 75, pp. 108-14.10.1016/j.matchar.2012.10.007 ↗
24. [24] L. Li, W. Xu, M. Saber, Y. Zhu, C.C. Koch and R.O. Scattergood: Mater. Sci. Eng. A, 2015, vol. 636, pp. 565-71.10.1016/j.msea.2015.03.117 ↗
25. [25] M. Wang, Z. Zhou, H. Sun, H. Hu and S. Li: Mater. Sci. Eng. A, 2013, vol. 559, pp. 287-92.10.1016/j.msea.2012.08.099 ↗
26. [26] H. Oka, M. Watanabe, N. Hashimoto, S. Ohnuki, S. Yamashita and S. Ohtsuka: J. Nucl. Mater., 2013, vol. 442, pp. 164-8.10.1016/j.jnucmat.2013.04.073 ↗
27. [27] H. Oka, M. Watanabe, S. Ohnuki, N. Hashimoto, S. Yamashita and S. Ohtsuka: J. Nucl. Mater., 2014, vol. 447, pp. 248-53.10.1016/j.jnucmat.2014.01.025 ↗
28. [28] Y. Miao, K. Mo, B. Cui, W. Chen, M.K. Miller, K.A. Powers, V. McCreary, D. Gross, J. Almer, I.M. Robertson, J.F. Stubbins: Mater. Charact., 2015, vol. 101, pp. 136-43.10.1016/j.matchar.2015.01.015 ↗
29. [29] M.H. Enayati and M.R. Bafandeh: J. Alloys Compd., 2008, vol. 454, pp. 228-32.10.1016/j.jallcom.2007.03.064 ↗
30. [30] M.P. Phaniraj, D.-I. Kim, J.-H. Shim and Y. W. Cho: Acta Mater., 2009, vol. 57, pp. 1856-64.10.1016/j.actamat.2008.12.026 ↗
31. [31] Y.L. Xu, Z.J. Zhou, M. Li and P. He: J. Nucl. Mater., 2011, vol. 417, pp. 283-5.10.1016/j.jnucmat.2010.12.155 ↗
32. [32] H. Sakasegawa, L. Chaffron, F. Legendre, L. Boulanger, T. Cozzika, M. Brocq and Y. de Carlan: J. Nucl. Mater., 2009, vol. 384, pp. 115-8.10.1016/j.jnucmat.2008.11.001 ↗
33. [33] J.H. Kim, T.S. Byun and D.T. Hoelzer: J. Nucl. Mater., 2010, vol. 407, pp. 143-50.10.1016/j.jnucmat.2010.09.054 ↗
34. [34] P. Susila, D. Sturm, M. Heilmaier, B.S. Murty and V. Subramanya Sarma: J. Mater. Sci., 2010, vol. 45, pp. 4858-65.10.1007/s10853-010-4264-3 ↗
35. [35] D. Srinivasan, R. Corderman and P.R. Subramanian: Mater. Sci. Eng. A, 2006, vol. 416, pp. 211-8.10.1016/j.msea.2005.09.109 ↗
36. [36] D. Kuhlmann-Wilsdorf: Mater. Sci. Eng. A, 1989, vol. 113, pp. 1-41.10.1016/0921-5093(89)90290-6 ↗
37. [37] M.A. Munõz-Morris, C.G Oca and D.G. Morris: Acta Mater., 2002, vol. 50, pp. 2825-36.10.1016/S1359-6454(02)00101-5 ↗
38. [38] R.A. Masumura, R.M. Hazzledine and C.S. Pande: Acta Meter., 1998, vol. 46, pp. 4527-34.10.1016/S1359-6454(98)00150-5 ↗
39. [39] X.H. Chen, J. Lu, L. Lu and K. Lu: Scripta Mater., 2005, vol. 52, pp. 1039-44.10.1016/j.scriptamat.2005.01.023 ↗
40. [40] B.P. Kashyap and K. Tangri: Acta Metall. Mater., 1995, vol. 43, pp. 3971-81.10.1016/0956-7151(95)00110-H ↗
41. [41] B. Ahn, E.J. Lavernia and S.R. Nutt: J. Mater. Sci., 2008, vol. 43, pp. 7403-8.10.1007/s10853-008-2950-1 ↗
42. [42] S. Berbenni, V. Favier and M. Berveiller: Int. J. Plast., 2007, vol. 23, pp. 114-42.10.1016/j.ijplas.2006.03.004 ↗
43. [43] M.C. Zhao, F. Yin, T. Hanamura, K. Nagai and A. Atrens: Scripta Mater., 2007, vol. 57, pp. 857-60.10.1016/j.scriptamat.2007.06.062 ↗
44. [44] J. Gubicza, G. Dirras, P, Szommer and B. Bacroix: Mater. Sci. Eng. A, 2007, vol. 458, pp. 385-90.10.1016/j.msea.2006.12.127 ↗
45. [45] A. Kelly and R.B. Nicholson: Strengthening methods in crystals, Elsevier, New York, 1971, pp 37-47.
46. [46] A. Takahashi, Z.Z. Chen, N. Ghoniem and N. Kioussis: J. Nucl. Mater., 2011, vol. 417, pp. 1098-1101.10.1016/j.jnucmat.2010.12.062 ↗
47. [47]. J. Lin, K. Mo, D. Yun, Y. Miao, X. Liu, H. Zhao, D.T. Hoelzer, J. Park, J. Almer, G. Zhang, Z. Zhou, J.F. Stubbins, A.M. Yacout: J. Nucl. Mater., 2015, 10.1016/j.jnucmat.2015.10.049.10.1016/j.jnucmat.2015.10.049 ↗
48. [48] R.S. Herrick, J.R. Weertman, R. Petkovic-Luton and M.J. Luton: Scripta Mater., 1988, vol. 22, pp. 1879-84.10.1016/S0036-9748(88)80230-8 ↗
49. [49] D. Häussler, M. Bartsch, U. Messerschmidt and B. Reppich: Acta Mater., 2001, vol. 49, pp. 3647-57.10.1016/S1359-6454(01)00285-3 ↗
50. M.A. Meyers and K.K. Chawla: Mechanical Behavior of Materials, 2 nd ed., Cambridge University Press, Cambridge, 2009, pp.114, 283.
51. [51] D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, Chapman & Hall Press, London, 1992, pp. 113-5.10.1007/978-1-4899-3051-4 ↗