Effects of MgO Nanoparticle Additions on the Structure and Mechanical Properties of Continuously Cast Steel Billets
Source abstract
Abstract
A new approach for pre-dispersing MgO nanoparticles and adding them to molten steel during continuous casting operations was established. The influence of different mass fractions of MgO nanoparticles on inclusion characteristics, steel microstructure, and the ability of inclusions to induce acicular ferrite (AF) formation, was investigated. The results revealed that after adding different mass fractions of nanoparticles, the majority of inclusions contained MgO-Al2O3, and the inclusion size was considerably refined. These inclusions promoted AF formation, and with increasing inclusion size from 1.0 to 1.8 μm, the proportion of AF progressively increased. The ability of inclusions to induce AF was greatly reduced when the inclusion size reached 7.0 μm. This was primarily due to the relationship between the ferrite nucleation rate and inclusion size. It was also found that the size of inclusions that functioned as pinning particles was larger than that of inclusions that served as AF nucleation cores. When the mass fraction of MgO nanoparticles reached 0.05 pct, the degree of interlocking of AF within the microstructure of billet specimens was maximized and this was associated with optimal values for strength and impact properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. X. Zhang, L. Fan, Y. Xu, J. Li, X. Xiao, and L. Jiang: Mater & Design., 2015, vol. 65, pp. 682-89.10.1016/j.matdes.2014.09.074 ↗
2. C. Zhang, X. Song, P. Lu, and X. Hu: Mater & Design., 2012, vol. 36, pp. 233-42.10.1016/j.matdes.2011.11.016 ↗
3. J. Kobayashi, S.M. Song, and K.I. Sugimoto: ISIJ Int., 2012, vol. 52, pp. 1124-29.10.2355/isijinternational.52.1124 ↗
4. C.J. Martis, S.K. Putatunda, and J. Boileau: Mater & Design., 2013, vol. 46, pp. 168-74.10.1016/j.matdes.2012.10.017 ↗
5. D. Rasouli, S.K. Asl, A. Akbarzadeh, and G.H. Daneshi: Mater & Design., 2009, vol. 30, pp. 2167-72.10.1016/j.matdes.2008.08.024 ↗
6. M. Niikura, M. Fujioka, Y. Adachi, A. Matsukura, T. Yokota, Y. Shirota, and Y. Hagiwara: J Mater Process Tech., 2001, vol. 117, pp. 341-46.10.1016/S0924-0136(01)00800-7 ↗
7. P. Cizek, B. Wynne, C. Davies, B. Muddle, and P. Hodgson: Metall Mater Trans A., 2002, vol. 33, pp. 1331-49.10.1007/s11661-002-0059-8 ↗
8. A. Kojima, Y. Watanabe, Y. Terada, A. Yoshie, and H. Tamehiro: ISIJ Int., 1996, vol. 36, pp. 603-10.10.2355/isijinternational.36.603 ↗
9. H. Beladi, G.L. Kelly, A. Shokouhi, and P.D. Hodgson: Mat Sci Eng A-Struct., 2004, vol. 371, pp. 343-52.10.1016/j.msea.2003.12.024 ↗
10. P.C.M. Rodrigues, E.V. Pereloma, and D.B. Santos: Mat Sci Eng A-Struct., 2000, vol. 283, pp. 136-43.10.1016/S0921-5093(99)00795-9 ↗
11. C. Zener: Trans Amer Inst Metall Engrs., 1949, vol. 175, pp. 15-17.
12. P.L. Harrison and R.A. Farrar: J. Mater Sci., 1981, vol. 16, pp. 2218-26.10.1007/BF00542384 ↗
13. J. Takamura and S. Mizoguchi: Proceedings of 6th International Iron and Steel Congress., Iron and Steel Institution Japan, Tokyo, 1990, vol. 01, pp. 591–95.
14. S. Mizoguchi and J. Takamura: Proceedings of 6th International Iron and Steel Congress., Iron and Steel Institution Japan, Tokyo, 1990, vol. 01, pp. 598–604.
15. H. Homma, S. Ohkita, S. Matsuda, and K. Yamamoto: Weld J., 1987, vol. 66, pp. 301-09.
16. Y. Tomita, N. Saito, T. Tsuzuki, Y. Tokunaga, and K. Okamoto: ISIJ Int., 1994, vol. 34, pp. 829-35.10.2355/isijinternational.34.829 ↗
17. K. Yamamoto, T. Hasegawa, and J. Takamura: ISIJ Int., 1996, vol. 36, pp. 80-86.10.2355/isijinternational.36.80 ↗
18. J. Shim, Y.W. Chou, S.H. Chung, J. H. Shim, and D.N. Lee: Acta Mater., 1999, vol. 47, pp. 2751-60.10.1016/S1359-6454(99)00114-7 ↗
19. J.S. Byun, J.H. Shim, Y.W. Chou, and D.N. Lee: Acta Mater., 2003, vol. 51, pp. 1593-1606.10.1016/S1359-6454(02)00560-8 ↗
20. S.H. Nedjad and A. Farzaneh: Scripta Mater., 2007, vol. 57, pp. 937-40.10.1016/j.scriptamat.2007.07.016 ↗
21. R.A. Ricks, P.R. Howell, and G.S. Barritte: J. Mater Sci., 1982, vol. 17, pp. 732-40.10.1007/BF00540369 ↗
22. S.S. Babu and S.A. David: ISIJ Int., 2002, vol. 42, pp. 1344-53.10.2355/isijinternational.42.1344 ↗
23. S. Talas and R.C. Cochrane: J. Alloys Compd., 2005, vol. 396, pp. 224-27.10.1016/j.jallcom.2005.01.009 ↗
24. K. Nishioka and K. Ichikawa: Sci Technol Adv Mat., 2012, vol. 13, pp. 1-20.
25. M. Hasegawa and K. Takeshita: Metall Mater Trans B., 1978, vol. 09, pp. 383-88.10.1007/BF02654411 ↗
26. M.Hasegawa and K. Takeshita: Tetsu-to-Hagané., 1976, vol. 62, pp. 201-09. (in Japanese).10.2355/tetsutohagane1955.62.2_201 ↗
27. M.Hasegawa and K.Takeshita: Tetsu-to-Hagané., 1977,vol. 63, pp. 294-302. (in Japanese).10.2355/tetsutohagane1955.63.2_294 ↗
28. M.Hasegawa and K. Takeshita: Bull. Jap. Inst. Metals., 1976, vol. 15, pp. 462-64. (in Japanese).10.2320/materia1962.15.462 ↗
29. J.M. Gregg and H.K.D.H. Bhadeshia: Acta Mater., 1997, vol. 45, pp. 739-48.10.1016/S1359-6454(96)00187-5 ↗
30. G.C. Wang, T.M. Wang, S.N. Li, and K.M. Fang: Chinese Journal of Engineering., 2007, vol. 29, pp. 578-81. (in Chinese).
31. Z.D. Huang, J.P. Niu, Q.K. Cai, and L. Wang: Journal of Northeastern University., 2009, vol. 30, pp. 997-1000. (in Chinese).
32. B. Wen and B. Song: Steel Res Int., 2012, vol. 83, pp. 487-95.10.1002/srin.201100266 ↗
33. H.S. Kim, H.G. Lee, and K.S. Oh: Met Mater Int., 2000, vol. 06, pp. 305-10.10.1007/BF03028076 ↗
34. C.S. Smith: Trans. AIME, 1948, vol. 175, pp. 15-51.
35. J.W. Christian: in Physical Metallurgy, 1 st ed., R.W. Cahn, ed., North-Holland Publishing Company, Amsterdam, 1977, pp. 479–580.
36. W. Wang and L.M. Fu: Acta Metall Sin., 2008, vol. 44, pp. 723-28. (in Chinese)