Quantitative Analysis of Microstructural Constituents in Welded Transformation-Induced-Plasticity Steels
Source abstract
Abstract
A quantitative analysis of retained austenite and nonmetallic inclusions in gas tungsten arc (GTA)–welded aluminum-containing transformation-induced-plasticity (TRIP) steels is presented. The amount of retained austenite in the heat-affected and fusion zones of welded aluminum-containing TRIP steel with different base metal austenite fractions has been measured by magnetic saturation measurements, to study the effect of weld thermal cycles on the stabilization of austenite. It is found that for base metals containing 3 to 14 pct of austenite, 4 to 13 pct of austenite is found in the heat-affected zones and 6 to 10 pct in the fusion zones. The decomposition kinetics of retained austenite in the base metal and welded samples was also studied by thermomagnetic measurements. The decomposition kinetics of the austenite in the fusion zone is found to be slower compared to that in the base metal. Thermomagnetic measurements indicated the formation of ferromagnetic ε carbides above 290 °C and paramagnetic η(ε′) transient iron carbides at approximately 400 °C due to the decomposition of austenite during heating.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
2. M. Amirthalingam, M. Hermans, and I. Richardson: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 901–09.10.1007/s11661-008-9761-5 ↗
3. N. Kapustika, C. Conrardy, S. Babu, and C. Albright: Weld. J., 2008, vol. 87, pp. 135s–148s.
4. L. Zhao, N.H. van Dijk, E. Bruck, J. Sietsma, and S.van der Zwaag: Mater. Sci. Eng., A, 2001, vol. A313, pp. 145–52.10.1016/S0921-5093(01)00965-0 ↗
5. B.D. Cullity: Introduction to Magnetic Materials, Addison-Wesley, Reading, MA, 1972.
6. E. Girault, P. Jacques, Ph. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt, and F. Delannay: Mater. Charact., 1998, vol. 40, pp. 111–18.10.1016/S1044-5803(97)00154-X ↗
7. L. Zhao, M.K. Wibowo, M.J.M. Hermans, S.M.C. van Bohemen, and J. Sietsma: J. Mater. Process. Technol., 2009, vol. 209, pp. 5286–92.10.1016/j.jmatprotec.2009.03.017 ↗
8. N. Luzginova, L. Zhao, and J. Sietsma: Mater. Sci. Eng., A, 2007, vol. A448, pp. 104–10.10.1016/j.msea.2006.10.014 ↗
9. B.K. Jha and N.S. Mishra: Mater. Sci. Eng., A, 1999, vol. A263, pp. 42–55.10.1016/S0921-5093(98)01081-8 ↗
10. H. Yin: Iron Steel Technol., 2006, June, pp. 64–73.
11. L. Zhao, F.J. Vermolen, J. Sietsma, and S. van der Zwaag: J. Mater. Sci. Technol., 2003, vol. 19, pp. 105–08.
12. A.S. Arrott and B. Heinrich: J. Appl. Phys., 1981, vol. 53 (3), pp. 2113–15.10.1063/1.329634 ↗
13. C. Kittle: Introduction to Solid State Physics, 6th ed., John Wiley & Sons Inc., New York, NY, 1986, p. 429.
14. M.H. Saleh and R. Priestner: J. Mater. Process. Technol., 2001, vol. 113, pp. 587–93.10.1016/S0924-0136(01)00638-0 ↗
15. E. Girault, P. Jacques, P. Ratchev, J. Van Humbeeck, B. Verlinden, and E. Aernoudt: Mater. Sci. Eng., A, 1999, vols. A273–A275, pp. 471–74.10.1016/S0921-5093(99)00330-5 ↗
16. T. Minote, S. Torizuka, A. Ogawa, and N. Nikura: ISIJ Int., 1996, vol. 36 (2), pp. 201–07.10.2355/isijinternational.36.201 ↗
17. M. Amirthalingam, M.J.M. Hermans, and I.M. Richardson: IIW Document Nos. IX-2291-08 and IX-L-1029-08, International Institute of Welding, 2008.
18. J. Wang and S. van der Zwaag: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1527–39.10.1007/s11661-001-0240-5 ↗
19. Y. Hirotsu and S. Nagakura: Acta Metall., 1972, vol. 20, pp. 645–55.10.1016/0001-6160(72)90020-X ↗
20. Y. Hirotsu, Y. Itakura, K. Su, and S. Nagakura: Trans. JIM, 1976, vol. 17, pp. 503–13.10.2320/matertrans1960.17.503 ↗
21. J.H. Jack: J. Iron Steel Inst., 1951, vol. 169, pp. 26–36.