journal article·2011-09

Evaluation of Al-Ti-C Master Alloys as Grain Refiner for Aluminum and Its Alloys

M. A. Doheim, A. M. Omran, A. Abdel-Gwad, G. A. Sayed

Publisher page

Abstract

Al-Ti-C master alloys have a great potential as efficient grain refiners for aluminum and its alloys. In the present work, the Al-Ti-C master alloys are synthesized via a relatively novel technique through the reaction of a compacted mixture of K2TiF6 and graphite with molten aluminum. The obtained alloys are examined using scanning electron microscopy (SEM), energy-dispersive spectroscopy, and X-ray diffraction (XRD) methods. The results indicate that the produced Al-Ti-C master alloys contain TiC and TiAl3 particles within the aluminum matrix. Also, these alloys were evaluated using the KBI test mold. The results indicate that the produced Al-Ti-C master alloy is an efficient grain refiner for pure aluminum and its alloys compared with the Al-Ti-B one. The factors affecting the grain refinement of aluminum and its alloys are studied. The proper conditions for evaluating the efficiency of the produced Al-Ti-C master alloy to obtain a minimum grain size are as follows: temperature, 993 K (720 °C); holding time, 2 minutes; and (Ti/Al) weight ratio, 0.01 pct.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. L. Backerud, H. Boettcher, J. Courtenary, and R. Vainikl: in Light Metals 2004, A.T. Tabereaux, ed., TMS, Warrendale, PA, 2004, pp. 833–35.
2. A.M. Omran, M.A. Shaheen, J.H. Aly, and A. Bastaweesy: in Light Metals 2004, A.T. Tabereaux, ed., TMS, Warrendale, PA, 2004, pp. 817–20.
3. K.T. Kashyap and Chandrakar: Bull. Mater. Sci., 2001, vol. 24 (4), pp. 345–53.10.1007/BF02708630 ↗
4. D. Boot, P. Cooper, D.H. StJohn, and A.K. Dohle: in Light Metals 2002, W. Schneider, ed., TMS, Warrendale, PA, 2002, pp. 909–15.
5. G.K. Sigworth: U.S Patent No. 4812290, 1989.
6. I.H. Ali, M.A. Shaheen, and A.M. Omran: 2nd Minia Int. Conf. Advanced Trends in Engineering, Apr. 7–9, 2002, El Minia University, El Minia, Egypt, pp. 1403–10.
7. A.A. Abdel-Hamid and A.L.O. Zaid: Current Advances in Mechanical Design and Production, 7th Cairo University International MDP Conf., Cairo, Egypt, Feb. 2000, pp. 331–38.10.1016/B978-008043711-8/50034-9 ↗
8. J.A. Spittle and S. Sadli: Cast Met., 1995, vol. 7 (4), pp. 247–53.10.1080/09534962.1995.11819185 ↗
9. Y. Lina and L. Xiangfa: J. Mater. Process. Technol., 2007, vol. 82, pp. 519–24.
10. B.S. Murty, S.A. Kori, and M. Chakraborty: Int. Mater. Rev., 2002, vol. 47 (1), pp. 3–29.10.1179/095066001225001049 ↗
11. A. Banerrji and W. Reif: Metall. Trans. A, 1986, vol. 17A, pp. 2127–37.10.1007/BF02645911 ↗
12. A. Banerrji and W. Reif: Metall. Trans. A, 1985, vol. 16A, pp. 2065–68.10.1007/BF02662410 ↗
13. M.A. Hadia, A.A. Ghaneya, and A. Niazy: in Light Metals 1996, W. Hale, ed., TMS, Warrendale, PA, 1996, pp. 729–39.
14. A.J. Whitehead, S.A. Danilak, and D.A. Granger: in Light Metals 1997, R. Huglen, ed., Warrendale, PA, TMS, 1997, pp. 785–93.
15. M.A. Doheim, A.M. Omran, and A. Abdel-Gwad: J. Eng. Sci., 2008, vol. 36 (2), pp. 471–81.
16. P. Hoefs, W. Reif, A.H. Geen, P.C. Van Wiggen, W. Schneider, and D. Brandner: in Light Metals 1997, R. Huglen, ed., TMS, Warrendale, PA, 1997, pp. 777–84.
17. B.Q. Zang, L. Lu, M.O. Li, H.S. Fang, H.T. Ma, and J.G. Li: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1727–33.10.1007/s11661-003-0316-5 ↗
18. Y. Birol: J. Alloys Compd., 2008, vol. 454, pp. 110–17.10.1016/j.jallcom.2006.12.016 ↗
19. A.M. Omran: Al-Azhar Univ. Eng. J., JAUES, 2008, vol. 3 (13), pp. 56–61.
20. A. Cibula: J. Inst. Met., 1951–52, vol. 80, pp. 1–16.10.1017/S0022481200102890 ↗
21. A.M. Kanury: Metall. Trans. A, 1992, vol. 23A, pp. 2349–56.10.1007/BF02658036 ↗
22. A.R. Kennedy: Proc. Int. Conf., HTC, Cracow, Poland, June–July 1997.
23. A.R. Kennedy, A.E. Karantzalis, and S.M. Wyatt: J. Mater. Sci., 1999, vol. 34 (5), pp. 933–40.10.1023/A:1004519306186 ↗
24. I.A. Mwamba: M.Sc. Thesis, University of the Witwatersrand, Johannesburg, 2006.