Determining Thermophysical Properties of Normal and Metastable Liquid Zr-Fe Alloys by Electrostatic Levitation Method
Source abstract
Abstract
The thermophysical properties of liquid Zr-Fe alloys were experimentally measured by an electrostatic levitation technique. A series of undercoolings from 45 K to 410 K were achieved for these liquid alloys in the natural radiation cooling process. Since the experiments were conducted in high-vacuum and containerless conditions, the ratio of the specific heat to the hemispherical emissivity was deduced and showed a quadratic relationship with temperature. For the eutectic Zr76Fe24 alloy, the hypercooling of 306 K and hemispherical emissivity were derived theoretically due to its low liquidus temperature and scarce volatilization. Through digital image processing, the alloy densities were measured, and the results depended linearly on temperature over a wide temperature range covering both superheated and undercooled liquid states. The absolute value of the temperature coefficient tended to increase with increasing Fe contents, indicating that the liquid density sensitivity increased with increasing Fe contents. The surface tension and viscosity were also determined by a drop oscillation method under the electrostatic levitation condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermodynamic and Structural Properties of Metals and Alloys · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Y. J. Lü and M. Chen, Int. J. Mol. Sci., 2011, vol. 12, pp. 278-316.10.3390/ijms12010278 ↗
2. S. H. Oh, M. F. Chisholm, Y. Kauffmann, W. D. Kaplan, W. Luo, M. Ruehle and C. Scheu, Science, 2010, vol. 330, pp. 489-93.10.1126/science.1190596 ↗
3. M. P. Brenner and D. Lohse, Phys. Rev. Lett., 2008, vol. 101, art. no. 214505.10.1103/PhysRevLett.101.214505 ↗
4. B. Ribic, R. Rai and T. DebRoy, Sci. Technol. Weld. Joining, 2008, vol. 13, pp. 683-93.10.1179/136217108X356782 ↗
5. S. I. Sohn, Phys. Rev. E, 2009, vol. 80, art. no. 55302.
6. H. P. Wang, S. J. Yang, L. Hu and B. Wei, Chem. Phys. Lett., 2016, vol. 653, pp. 112-6.10.1016/j.cplett.2016.04.074 ↗
7. L. Hu, L. H. Li, S. J. Yang and B. Wei, Chem. Phys. Lett., 2015, vol. 621, pp. 91-5.10.1016/j.cplett.2014.12.058 ↗
8. B. O. Mukhamedov, I. Saenko, A. V. Ponomareva, M. J. Kriegel, A. Chugreev, A. Udovsky, O. Fabrichnaya and I. A. Abrikosov, Intermetallics, 2019, vol. 109, pp. 189-96.10.1016/j.intermet.2019.01.018 ↗
9. J. C. Bendert, M. E. Blodgett, A. K. Gangopadhyay and K. F. Kelton, Appl. Phys. Lett., 2013, vol. 102, art. no. 211913.10.1063/1.4808030 ↗
10. I. Saenko, A. Kuprava, A. Udovsky and O. Fabrichnaya, Calphad, 2019, vol. 66, art. no. 101625.10.1016/j.calphad.2019.05.002 ↗
11. J. D. Paulsen, J. C. Burton and S. R. Nagel, Phys. Rev. Lett., 2011, vol. 106, art. no. 114501.10.1103/PhysRevLett.106.114501 ↗
12. E. de Miguel, N. G. Almarza and G. Jackson, J. Chem. Phys., 2007, vol. 127, art. no. 34707.
13. S. Jeon, D. Kang, S. H. Kang, S. E. Kang, J. T. Okada, T. Ishikawa, S. Lee and G. W. Lee, Isij Int., 2016, vol. 56, pp. 719-22.10.2355/isijinternational.ISIJINT-2015-526 ↗
14. T. Ishikawa and P. Paradis, Crystals, 2017, vol. 7, art. no. 309.10.3390/cryst7100309 ↗
15. D. Kang, S. Jeon, H. Yoo, T. Ishikawa, J. T. Okada, P. Paradis and G. W. Lee, Cryst. Growth Des., 2014, vol. 14, pp. 1103-9.10.1021/cg401597p ↗
16. H. P. Wang, B. C. Luo and B. Wei, Phys. Rev. E, 2008, vol. 78, art. no. 41204.
17. P. C. Zhang, J. Chang and H. P. Wang, Metall. Mater. Trans. B, 2020, vol. 51, pp. 327-37.10.1007/s11663-019-01748-0 ↗
18. W. J. Xie, C. D. Cao, Y. J. Lü and B. Wei, Phys. Rev. E, 2002, vol. 66, art. no. 61601.
19. H. P. Wang, P. Lü, X. Cai, B. Zhai, J. F. Zhao, B. Wei, Mater. Sci. Eng. A, 2020, vol. 772, art. no. 138660.
20. H. P. Wang, M. X. Li, P. F. Zou, X. Cai, L. Hu and B. Wei, Phys. Rev. E, 2018, vol. 98, art. no. 63106.
21. K. Zhou and B. Wei, Appl. Phys. A: Mater. Sci. Process., 2016, vol. 122, art. no. 248.
22. R. K. Wunderlich, H. Fecht and G. Lohöfer, Metall. Mater. Trans. B, 2017, vol. 48, pp. 237-46.10.1007/s11663-016-0847-y ↗
23. H. P. Wang, C. H. Zheng, P. F. Zou, S. J. Yang, L. Hu and B. Wei, J. Mater. Sci. Technol., 2018, vol. 34, pp. 436-9.10.1016/j.jmst.2017.10.014 ↗
24. Q. L. Chu, M. Zhang, J. H. Li, F. X. Yan and C. Yan, Mater. Lett., 2018, vol. 231, pp. 134-6.10.1016/j.matlet.2018.08.038 ↗
25. J. L. Lin, W. C. Zhong, Z. W. Cheng, H. Z. Bilheux and B. J. Heuser, J. Nucl. Mater., 2017, vol. 496, pp. 129-39.10.1016/j.jnucmat.2017.09.025 ↗
26. W. Li, Y. Z. Yang, J. Xu and C. X. Xie, J. Alloy. Compd., 2017, vol. 710, pp. 644-9.10.1016/j.jallcom.2017.03.315 ↗
27. Q. Peng, E. Gartner, J. T. Busby, A. T. Motta and G. S. Was, Corrosion, 2007, vol. 63, pp. 577-90.10.5006/1.3278408 ↗
28. A. Couet, A. T. Motta and R. J. Comstock, J. Nucl. Mater., 2014, vol. 451, pp. 1-13.10.1016/j.jnucmat.2014.03.001 ↗
29. S. Martin, S. Richter, S. Decker, U. Martin, L. Krüger and D. Rafaja, Steel Res. Int., 2011, vol. 82, pp. 1133-40.10.1002/srin.201100099 ↗
30. Y. X. Geng, Z. J. Zhang, Z. R. Wang, Y. M. Wang, J. B. Qiang, C. Dong, H. B. Wang and O. Tegus, J. Non-Cryst. Solids, 2016, vol. 450, pp. 1-5.
31. L. T. Zhang, Y. P. Zhang, Y. K. Zhou, W. X. Tian, S. Z. Qiu and G. H. Su, Prog. Nucl. Energ., 2015, vol. 79, pp. 167-81.10.1016/j.pnucene.2014.11.021 ↗
32. T. Okawa and T. Nakajima, Ann. Nucl. Energy, 2017, vol. 101, pp. 182-95.10.1016/j.anucene.2016.09.042 ↗
33. Y. Ohishi, H. Muta, K. Kurosaki, J. T. Okada, T. Ishikawa, Y. Watanabe and S. Yamanaka, J. Nucl. Sci. Technol., 2016, vol. 53, pp. 1943-50.10.1080/00223131.2016.1174626 ↗
34. F. Stein, G. Sauthoff and M. Palm, J. Phase Equilib., 2002, vol. 23, pp. 480-94.10.1361/105497102770331172 ↗
35. P. F. Zou, H. P. Wang, S. J. Yang, L. Hu and B. Wei, Metall. Mater. Trans. A, 2018, vol. 49, pp. 5488-96.10.1007/s11661-018-4877-8 ↗
36. P. F. Zou, H. P. Wang, S. J. Yang, L. Hu and B. Wei, Chem. Phys. Lett., 2017, vol. 681, pp. 101-04.10.1016/j.cplett.2017.05.059 ↗
37. A. J. Rulison and W. K. Rhim, Rev. Sci. Instrum., 1994, vol. 65, pp. 695-700.10.1063/1.1145087 ↗
38. Y. S. Sung, H. Takeya and K. Togano, J. Appl. Phys., 2002, vol. 92, pp. 6531-6.10.1063/1.1518753 ↗
39. L. Rayleigh, Proc. R. Soc. London, 1879, vol. 29, pp. 71-97.10.1098/rspl.1879.0015 ↗
40. K. V. Beard and J. Q. Feng, Proc. R. Soc. A, 1990, vol. 430, pp. 133-50.
41. P. F. Paradis, T. Ishikawa, G. W. Lee, D. HollandMoritz, J. Brillo, W. K. Rhim and J. T. Okada, Mater. Sci. Eng. R, 2014, 76, 1-53.10.1016/j.mser.2013.12.001 ↗
42. J. Lee, J. E. Rodriguez, R. W. Hyers and D. M. Matson, Metall. Mater. Trans. B, 2015, vol. 46, pp. 2470-5.10.1007/s11663-015-0434-7 ↗
43. P. F. Paradis and W. K. Rhim, J. Chem. Thermodyn., 2000, vol. 32, pp. 123-33.10.1006/jcht.1999.0576 ↗