Dissimilar Impact Welding of 6111-T4, 5052-H32 Aluminum Alloys to 22MnB5, DP980 Steels and the Structure–Property Relationship of a Strongly Bonded Interface
Source abstract
Abstract
The ability to weld high-strength aluminum to high-strength steel is highly desired for vehicle lightweighting but difficult to attain by conventional means. In this work, vaporizing foil actuator welding was used to successfully weld four Al/Fe combinations consisting of high-strength alloys: AA5052-H32, AA6111-T4, DP980, and 22MnB5. Flyer velocities up to 727 m/s were reached using 10 kJ input energy. In lap-shear testing, samples primarily failed in base aluminum near the aluminum’s native strength, showing that the welds were stronger than a base metal and that the base metal was not significantly weakened by the welding process. A particularly strong weld area was studied by transmission electron microscopy to shed light on the microstructural features of strong impact welds. It was found to be characterized by a continuously bonded, fully crystalline interface, extremely fine (nanoscale) grains, mesoscopic as well as microscopic wavy features, and lack of large continuous intermetallic compounds.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced Welding Techniques Analysis · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. William J. Joost: JOM, 2012, vol. 64, pp. 1032-103810.1007/s11837-012-0424-z ↗
2. Ranfeng Qiu, Chihiro Iwamoto, and Shinobu Satonaka: J. Mater. Process. Technol., 2009, vol. 209, pp. 4186–93.10.1016/j.jmatprotec.2008.11.003 ↗
3. R.Y. Hwang and C.P. Chou: Scripta Mater., 1998, vol. 38, pp. 215–21.10.1016/S1359-6462(97)00472-7 ↗
4. Simon Benson, Jonathan Downes, and Robert S. Dow: Thin-Walled Struct., 2013, vol. 70, pp. 19–32.10.1016/j.tws.2013.04.006 ↗
5. Y. Abe, T. Kato, and K. Mori: J. Mater. Process. Technol., 2006, vol. 177, pp. 417–21.10.1016/j.jmatprotec.2006.04.029 ↗
6. T.A. Barnes and I.R. Pashby: J. Mater. Process. Technol., 2000, vol. 99, pp. 72–79.10.1016/S0924-0136(99)00361-1 ↗
7. Paul Briskham, Nicholas Blundell, Li Han, Richard Hewitt, Ken Young, and Douglas Boomer: Sae Sp, 2006, vol. 2034, p. 105.
8. Z. Shen, Y. Chen, M. Haghshenas, and A.P. Gerlich: Eng. Sci. Technol., Int. J., 2015, vol. 18, pp. 8–15.
9. S. Fukada, R. Ohashi, M. Fujimoto, and H. Okada: Refill Friction Stir Spot Welding of Dissimilar Materials Consisting of A6061 and Hot Dip Zinc-Coated Steel Sheets, Woodhead Publishing Limited, Cambridge, 2013.10.1533/978-1-78242-164-1.183 ↗
10. A. Vivek, S.R. Hansen, B.C. Liu, and Glenn S. Daehn: J. Mater. Process. Technol., 2013, vol. 213, pp. 2304–11.10.1016/j.jmatprotec.2013.07.006 ↗
11. Mustafa Acarer and Bilge Demir: Mater. Lett., 2008, vol. 62, pp. 4158–60.10.1016/j.matlet.2008.05.060 ↗
12. Arun Prasath Manogaran, Prabu Manoharan, Didier Priem, Surendar Marya, and Guillaume Racineux: J. Mater. Process. Technol., 2014, vol. 214, pp. 1236–44.10.1016/j.jmatprotec.2014.01.007 ↗
13. G.R. Abrahamson: J. Appl. Mech., 1961. 28:519-52810.1115/1.3641777 ↗
14. N. Mårtensson and J. Schweitz: Metall. Trans. A, 1985, vol. 16A, pp. 841–52.
15. B. Crossland, A.S. Bahrani, and T.J. Black: Proc. R. Soc. London. Ser. A: Math. Phys. Sci., 1967, pp. 123–36.
16. Haiyang Lei, Yongbing Li, Blair E. Carlson, and Zhongqin Lin: J. Manuf. Sci. Eng., 2015, vol. 137, p. 51028.10.1115/1.4029093 ↗
17. A. Szecket: J. Vac. Sci. Technol. A, 1985, vol. 3, p. 2588.10.1116/1.572839 ↗
18. O.T. Strand, D.R. Goosman, C. Martinez, T.L. Whitworth, and W.W. Kuhlow: Rev. Sci. Instrum., 2006, vol. 77, p. 83108.10.1063/1.2336749 ↗
19. S.R. Hansen, A. Vivek, and G.S. Daehn: Proc. Int. Conf. High Speed Form, 2014.
20. Jason R. Johnson, Geoff Taber, Anupam Vivek, Yuan Zhang, Scott Golowin, Kristin Banik, Gregg K. Fenton, and Glenn S. Daehn: Steel Res. Int., 2009, vol. 80, pp. 359–65.
21. Patrick W. Trimby: Ultramicroscopy, 2012, vol. 120, pp. 16–24.10.1016/j.ultramic.2012.06.004 ↗
22. A. Vivek, B. Liu, D. Sakkinen, M. Harris, and G. Daehn: SAE Technical Paper, 2015, pp. 2–6.
23. A.K. Lakshminarayanan, V. Balasubramanian, and K. Elangovan: Int. J. Adv. Manuf. Technol., 2009, vol. 40, pp. 286–96.10.1007/s00170-007-1325-0 ↗
24. Jérôme Fontane, Laurent Joly, and Jean N. Reinaud: Phys. Fluids, 2008, vol. 20, p. 91109.10.1063/1.2976423 ↗
25. Zhisong Fan, Haiping Yu, and Chunfeng Li: Scripta Mater., 2016, vol. 110, pp. 14–18.10.1016/j.scriptamat.2015.07.035 ↗
26. J Li, Q Yu, Z Zhang, W Xu, X Sun: Appl. Phys. Lett. 2016, vol. 108, pp. 201606.10.1063/1.4947465 ↗
27. M. Presley: Ph.D. Dissertation, The Ohio State University, Columbus, OH, 2016.
28. J.L. Brimhall, H.E. Kissinger, and L.A. Charlot: Radiat. Eff., 1983, vol. 77, pp. 273–93.10.1080/00337578308228192 ↗
29. Taku Sakai, Andrey Belyakov, Rustam Kaibyshev, Hiromi Miura, and John J. Jonas: Progr. Mater. Sci., 2014, vol. 60, pp. 130–207.10.1016/j.pmatsci.2013.09.002 ↗
30. L.E. Murr, G. Liu, and J.C. McClure: J. Mater. Sci. Lett., 1997, vol. 16, pp. 1801–03.10.1023/A:1018556332357 ↗