journal article·2018-02

Strength Improvement Through Grain Refinement of Intermetallic Compound at Al/Fe Dissimilar Joint Interface by the Addition of Alloying Elements

H. S. Furuya, Y. T. Sato, Y. S. Sato, H. Kokawa, Y. Tatsumi

Publisher page

Abstract

Dissimilar material joining between Al alloys and steel may be effective in decreasing the weight of automobile bodies. In this study, dissimilar lap joining of Al alloys containing certain alloying elements, such as Ni, Cr, Mn, Ti, or Si, to interstitial-free steel was performed by tungsten inert gas arc brazing, and the effect of the alloying element on the joint strength associated with the Al-Fe intermetallic compound layer at the dissimilar interface was examined. The addition of an appropriate amount of an alloying element to the alloy increased the joint strength; the addition of Ni exhibited the most effective improvement. The additions of some elements changed the grain structure of the η-Fe2Al5 layer but not its chemical composition. This is the first study to clarify that smaller grain size of η-Fe2Al5 correlated to greater strength of the Al/Fe dissimilar joint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Cole GS and Sherman AM: Mater. Charact., 1995, vol. 35 pp. 3-9.10.1016/1044-5803(95)00063-1 ↗
2. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood, P. De Smet, A. Haszler and A.Vieregge: Mater. Sci. Eng. A, 2000, vol. 280, pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
3. S. Mukae, K. Nishio, M. Katoh, T. Inoue and K. Sumitomo: Q. J. Jpn. Weld. Soc., 1994, vol. 12, pp. 528-533.10.2207/qjjws.12.528 ↗
4. M. Yasuyama, K. Ogawa and T. Taka: Q. J. Jpn. Weld. Soc., 1996, vol. 14, pp. 314-320.10.2207/qjjws.14.314 ↗
5. S. Kobayashi and T. Yakou: Mater. Sci. Eng. A, 2002, vol. 338, pp. 44-53.10.1016/S0921-5093(02)00053-9 ↗
6. W.J. Cheng and C.J. Wang: Surf. Coat. Technol., 2009, vol. 204, pp. 824-828.10.1016/j.surfcoat.2009.09.061 ↗
7. Y. Tanaka and M. Kajihara: Mater. Trans., 2009, vol. 50, pp. 2212-2220.10.2320/matertrans.M2009128 ↗
8. H. Springer, A. Kostka, E.J. Payton, D. Raabe, A. Kaysser-Pyzalla and G. Eggeler: Acta Mater., 2011, vol. 59, pp. 1586-1600.10.1016/j.actamat.2010.11.023 ↗
9. W.J. Cheng and C.J. Wang: Appl. Surf. Sci., 2011, vol. 257, pp. 4663-4668.10.1016/j.apsusc.2010.12.118 ↗
10. N. Takata, M. Nishimoto, S. Kobayashi and M. Takeyama: Intermetallics, 2015, vol. 67, pp. 1-11.10.1016/j.intermet.2015.07.011 ↗
11. H. Oikawa, T. Saitoh, T. Nagase and T. Kiriyama: Tetsu-to-Hagane, 1997, vol. 83, pp. 641-646.10.2355/tetsutohagane1955.83.10_641 ↗
12. T. Murakami, K. Nakata, H. Tong and M. Ushio: ISIJ Inter., 2003, vol. 43, pp.1596-1602.10.2355/isijinternational.43.1596 ↗
13. R. Borrisutthekul, T. Yachi, Y. Miyashita and Y. Mutoh: Mater. Sci. Eng. A, 2007, vol. 467, pp. 108-113.10.1016/j.msea.2007.03.049 ↗
14. T. Ogura, H. Umeshita, Y. Saito and A. Hirose: Q. J. Jpn. Weld. Soc., 2009, vol. 27, pp. 174s-178s.10.2207/qjjws.27.174s ↗
15. C. Dharmendra, K.P. Rao, J. Wilden and S. Reich: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1497-1503.10.1016/j.msea.2010.10.050 ↗
16. J.L. Song, S.B. Lin, C.L. Yang, C.L. Fan and G.C. Ma: Sci. Technol. Weld. Joi., 2010, vol. 15, pp. 212-217.
17. S. Niu, H. Dong and P. Li: Weld. J., 2017, vol. 96, pp 173-184.
18. P. Peyre, G. Sierra, F. Deschaux-Beaume, D. Stuart and G. Fras: Mater. Sci. Eng. A, 2007, vol. 444, pp. 327-338.10.1016/j.msea.2006.09.111 ↗
19. J. Yang, Y. Li, H. Zhang, W. Guo, D. Weckman, and N. Zhou: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5149-5157.10.1007/s11661-015-3079-x ↗
20. J. Liu, S. Jiang, Y. Shi, Y. Kuang, G. Huang and H. Zhang: Opt. Laser. Eng., 2015, vol. 66, pp. 1-8.10.1016/j.optlastec.2014.08.004 ↗
21. J. Lin, N. Ma, Y. Lei and H. Murakawa: J. Mater. Process. Tech., 2013, vol. 213, pp. 1303-1310.10.1016/j.jmatprotec.2013.02.011 ↗
22. S. Yang, J. Zhang, J. Lian and Y. Lei: Mater. Des., 2013, vol. 49, pp. 602-612.10.1016/j.matdes.2013.01.045 ↗
23. T. Tanaka, T. Morishige and T. Hirata: Scr. Mater., 2009, vol. 61, pp. 756-759.10.1016/j.scriptamat.2009.06.022 ↗
24. T. Ogura, Y. Saito, T. Nishida, H. Nishida, T. Yoshida, N. Omichi, M. Fujimoto and A. Hirose: Scr. Mater., 2012, vol. 66, pp. 531-534.10.1016/j.scriptamat.2011.12.035 ↗
25. M. Movahedi, A.H. Kokabi, S.M. Seyed Reihani, W.J. Cheng and C.J. Wang: Mater. Des., 2013, vol. 44, pp. 487-492.10.1016/j.matdes.2012.08.028 ↗
26. L. Xu, L. Wang, Y.C. Chen, J.D. Robson and P.B. Prangnell: Metall. Mater. Trans. A, 2016, vol. 47, pp. 334-346.10.1007/s11661-015-3179-7 ↗
27. H.T. Fujii, Y. Goto, Y.S. Sato and H. Kokawa: Scr. Mater., 2016, vol. 116, pp. 135-138.10.1016/j.scriptamat.2016.02.004 ↗
28. G. Eggeler, W. Auer and H. Kaesche: J. Mater. Sci., 1986, vol. 21, pp. 3348-3350.10.1007/BF00553379 ↗
29. W.J. Cheng and C.J. Wang: Surf. Coat. Technol., 2011, vol. 205, pp. 4726-4731.10.1016/j.surfcoat.2011.04.061 ↗
30. H. Springer, A. Kostka, J.F. dos Santos and D. Raabe: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4630-4642.10.1016/j.msea.2011.02.057 ↗
31. K. Zhang, X. Bian, Y. Li, Y. Liu and C. Yang: J. Mater. Res., 2013, vol. 28, pp. 3279-3287.10.1557/jmr.2013.345 ↗
32. N. Takata, M. Nishimoto, S. Kobayashi and M. Takeyama: Intermetallics, 2014, vol. 54, pp. 136-142.10.1016/j.intermet.2014.06.003 ↗
33. J.L. Song, S.B. Lin, C.L. Yang and C.L. Fan: J. Alloy. Compd., 2009, vol. 488, pp. 217-222.10.1016/j.jallcom.2009.08.084 ↗
34. J.L. Song, S.B. Lin, C.L. Yang, C.L. Fan and G.C. Ma: Sci. Technol. Weld. J, 2010, vol. 15, pp. 213-18.10.1179/136217110X12665048207610 ↗
35. H. Dong, W. Hu, Y. Duan, X. Wang, C. Dong: J. Meter. Process. Tech., 2012, vol. 212, pp. 458-464.10.1016/j.jmatprotec.2011.10.009 ↗
36. Y. Su, X. Hua and Y. Wu: J. Mater. Process .Tech., 2014, vol. 214, pp. 750-755.10.1016/j.jmatprotec.2013.11.022 ↗
37. H. Glasbrenner, E. Nold and Z. Voss: J. Nucl. Mater., 1997, vol. 249, pp. 39-45.10.1016/S0022-3115(97)00186-4 ↗
38. M.V. Akdeniz and A.O. Mekharbov: Acta Mater., 1998, vol. 46, pp. 1185-1192.10.1016/S1359-6454(97)00318-2 ↗
39. H. Fujita and M. Nakamura: J. Surf. Finish. Soc. Jpn., 1989, vol. 40, pp. 777-781.10.4139/sfj.40.777 ↗
40. K.A. Nazari and S.G. Shabestari: J. Alloy Compd., 2009, vol. 478, pp. 523-530.10.1016/j.jallcom.2008.11.127 ↗
41. G. Wu, J. Zhang, Y. Ren, G. Li, X. Wu, Q. Li, and K. Chou: Metall. Mater. Trans. A, 2009, vol. 43, pp. 2012-2017.
42. H. Peng, X. Su, Z. Li, J. Wang, C. Wu, H. Tu and X. Lai: Surf. Coat. Technol. 2012, vol. 206, pp. 4329-4334.10.1016/j.surfcoat.2012.01.048 ↗
43. M. Zhao, Y. Cai, F. Yin, Z. Li, and Q. Yang: Surf. Coat. Technol., 2016, vol. 306, pp. 408-417.10.1016/j.surfcoat.2015.12.017 ↗
44. X. Li, A. Scherf, M. Heilmaier and F. Stein: J. Phase Equilib. Diffus., 2016, vol. 37, pp. 162-173.10.1007/s11669-015-0446-7 ↗
45. T. Takasugi and O. Izumi: Bulletin of the Japan Institute of Metals, 1988, vol. 27, pp. 637-643.10.2320/materia1962.27.637 ↗
46. E.M. Schlson and D.R. Barker: Scr. Mater., 1983, vol. 17, pp. 519-522.10.1016/0036-9748(83)90344-7 ↗
47. T.P. Weihs, V. Zinoviev, D.V. Viens and E.M. Schulson: Acta Metall., 1987, vol. 35, pp. 1109-1118.10.1016/0001-6160(87)90058-7 ↗
48. N. Kyokuta, M. Koba, T. Araki, S. Nambu, J. Inoue and T. Koseki: Mater. Trans., 2013, vol. 54, pp. 994-1000.10.2320/matertrans.M2012425 ↗
49. J. Inoue, S. Miwa and T. Koseki: Testu-to-Hagane, 2014, vol. 100, pp. 383-389.10.2355/tetsutohagane.100.383 ↗