A Comparative Study on the Static Recrystallization Behavior of Cold-Rolled Mg-3Al-1Zn Alloy Stimulated by Electropulse Treatment and Conventional Heat Treatment
Source abstract
Abstract
Cold-rolled AZ31 Mg alloy strips, with a reduction of 33 pct, were subjected to electropulse treatment (EPT) and conventional heat treatment (HT) to evaluate the respective influences of electropulses and temperature on the recrystallization behavior of AZ31. The highest measured temperature during the EPT (543 K) was used in HT. The electron backscattered diffraction results demonstrated that the EPT-stimulated recrystallization was completed within 8 seconds, whereas for HT, recrystallization was still far from completion even after 240 seconds. It was found that both the nucleation and grain growth of these two processes were totally different. In the EPT samples, nucleation tended to occur preferentially near extension twin boundaries and grain boundaries by continuous recrystallization, whereas in the HT samples, nucleation occurred mainly by grain boundaries bulging via discontinuous recrystallization. As grain growth proceeded, the texture intensities of the EPT samples decreased gradually and finally evolved into an obvious transverse-direction-split texture. This is likely attributable to the impact of electropulses on the boundary energy and the contribution of nonbasal dislocations; however, the basal-type textures of the HT samples were notably strengthened, which is associated with a 30 deg〈0001〉 orientation with respect to the deformed texture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic Effects on Materials · Microstructure and mechanical properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. W. Dong, Z. Liu, Y. Zhang and G. Quan: Rare Metal Materials & Engineering,2014, vol. 43, pp. 2277-80.
2. B. Mordike and T. Ebert: Mater. Sci. Eng. A,2001, vol. 302, pp. 37-45.10.1016/S0921-5093(00)01351-4 ↗
3. G. Gottstein and T. Al Samman: Mater. Sci. Forum,2005, vol. 495, pp. 623-32.10.4028/www.scientific.net/MSF.495-497.623 ↗
4. J. Bhattacharyya, S. Agnew and G. Muralidharan: Acta Mater.,2015, vol. 86, pp. 80-94.10.1016/j.actamat.2014.12.009 ↗
5. A. Levinson, R. K. Mishra, R. D. Doherty and S. R. Kalidindi: Acta Mater.,2013, vol. 61, pp. 5966-78.10.1016/j.actamat.2013.06.037 ↗
6. Q. Miao, L. Hu, G. Wang and E. Wang: Mater. Sci. Eng. A,2011, vol. 528, pp. 6694-701.10.1016/j.msea.2011.05.023 ↗
7. J. Tan and M. Tan: Mater. Sci. Eng. A,2003, vol. 339, pp. 124-32.10.1016/S0921-5093(02)00096-5 ↗
8. I. Polmear: Mater. Sci. Technol.,1994, vol. 10, pp. 1-16.10.1179/mst.1994.10.1.1 ↗
9. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama and K. Higashi: Acta Mater.,2003, vol. 51, pp. 2055-65.10.1016/S1359-6454(03)00005-3 ↗
10. J. Del Valle, F. Carreño and O. A. Ruano: Acta Mater.,2006, vol. 54, pp. 4247-59.10.1016/j.actamat.2006.05.018 ↗
11. X. Huang, K. Suzuki, A. Watazu, I. Shigematsu and N. Saito: J. Alloy. Compd.,2008, vol. 457, pp. 408-12.10.1016/j.jallcom.2007.02.144 ↗
12. H. Watanabe, T. Mukai and K. Ishikawa: J. Mater. Sci.,2004, vol. 39, pp. 1477-80.10.1023/B:JMSC.0000013922.16079.d3 ↗
13. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai: Acta Mater.,1999, vol. 47, pp. 579-83.10.1016/S1359-6454(98)00365-6 ↗
14. H. Chao, H. Sun, W. Chen and E. Wang: Mater. Charact.,2011, vol. 62, pp. 312-20.10.1016/j.matchar.2011.01.007 ↗
15. W. Wu, L. Jin, F. Wang, J. Sun, Z. Zhang, W. Ding and J. Dong: Mater. Sci. Eng. A,2013, vol. 582, pp. 194-202.10.1016/j.msea.2013.05.080 ↗
16. H. Yan, S. Xu, R. Chen, S. Kamado, T. Honma and E. Han: Scr. Mater.,2011, vol. 64, pp. 141-44.10.1016/j.scriptamat.2010.09.029 ↗
17. I. Basu and T. Al-Samman: Acta Mater.,2015, vol. 96, pp. 111-32.10.1016/j.actamat.2015.05.044 ↗
18. J. Kamran, U. D. Shamas, N. Tariq, F. Ali and B. Hasan: Mater. Des.,2015, vol. 81, pp. 11-20.10.1016/j.matdes.2015.05.029 ↗
19. J. Luo, W. Hu, Q. Jin, H. Yan and R. Chen: Scr. Mater.,2017, vol. 127, pp. 146-50.10.1016/j.scriptamat.2016.08.025 ↗
20. T. Al-Samman and G. Gottstein: Mater. Sci. Eng. A,2008, vol. 490, pp. 411-20.10.1016/j.msea.2008.02.004 ↗
21. Z. Zeng, Y. Zhu, S. Xu, M. Bian, C. Davies, N. Birbilis and J. Nie: Acta Mater.,2016, vol. 105, pp. 479-94.10.1016/j.actamat.2015.12.045 ↗
22. M. Steiner, J. Bhattacharyya and S. Agnew: Acta Mater.,2015, vol. 95, pp. 443-55.10.1016/j.actamat.2015.04.043 ↗
23. O. Troitskii and V. Likhtman: Kokl. Akad. Nauk,1963, vol. 148, pp. 332-34.
24. K. Liu, X. Dong, H. Xie and F. Peng: Mater. Sci. Eng. A,2015, vol. 623, pp. 97-103.10.1016/j.msea.2014.11.039 ↗
25. Z. Xu, G. Tang, S. Tian, F. Ding and H. Tian: J. Mater. Process. Technol.,2007, vol. 182, pp. 128-33.10.1016/j.jmatprotec.2006.07.019 ↗
26. G. Tang, J. Zhang, Y. Yan, H. Zhou and W. Fang: J. Mater. Process. Technol.,2003, vol. 137, pp. 96-99.10.1016/S0924-0136(02)01091-9 ↗
27. D. Zhang, S. To, Y. H. Zhu, H. Wang and G. Y. Tang: Metall. Mater. Trans. A,2012, vol. 43, pp. 1341-46.10.1007/s11661-011-0955-x ↗
28. Y. Jiang, G. Tang, C. Shek, Y. Zhu and Z. Xu: Acta Mater.,2009, vol. 57, pp. 4797-808.10.1016/j.actamat.2009.06.044 ↗
29. W. Lu, X. Zhang and R. Qin: Phil. Mag. Lett.,2014, vol. 94, pp. 688-95.10.1080/09500839.2014.961583 ↗
30. H. Conrad: Mater. Sci. Eng. A,2000, vol. 287, pp. 227-37.10.1016/S0921-5093(00)00780-2 ↗
31. Y. Zhu, S. To, X. Liu and G. Hu: Metall. Mater. Trans. A,2011, vol. 42, pp. 1933-40.10.1007/s11661-010-0591-x ↗
32. X. Wang, W. Dai, C. Ma and X. Zhao: J. Mater. Res.,2013, vol. 28, pp. 1378-85.10.1557/jmr.2013.86 ↗
33. J. Liu, W. Liu, G. Tang and R. Zhu: J. Mater. Res.,2014, vol. 29, pp. 596-603.10.1557/jmr.2014.3 ↗
34. X. Li, X. Li, J. Zhu, X. Ye and G. Tang: Scr. Mater.,2016, vol. 112, pp. 23-27.10.1016/j.scriptamat.2015.09.001 ↗
35. G. Hu, G. Tang, Y. Zhu and C. Shek: Metall. Mater. Trans. A,2011, vol. 42, pp. 3484-90.10.1007/s11661-011-0770-4 ↗
36. M. Sanjari, S. Farzadfar, T. Sakai, H. Utsunomiya, E. Essadiqi, I.-H. Jung and S. Yue: Mater. Sci. Eng. A,2013, vol. 561, pp. 191-202.10.1016/j.msea.2012.10.075 ↗
37. M.-J. Kim, K. Lee, K. H. Oh, I.-S. Choi, H.-H. Yu, S.-T. Hong and H. N. Han: Scr. Mater.,2014, vol. 75, pp. 58-61.10.1016/j.scriptamat.2013.11.019 ↗
38. X. Li, G. Tang, J. Kuang, X. Li and J. Zhu: Mater. Sci. Eng. A,2014, vol. 612, pp. 406-13.10.1016/j.msea.2014.06.075 ↗
39. J.-H. Roh, J.-J. Seo, S.-T. Hong, M.-J. Kim, H. N. Han and J. T. Roth: Int. J. Plasticity.,2014, vol. 58, pp. 84-99.10.1016/j.ijplas.2014.02.002 ↗
40. A. Galiyev, R. Kaibyshev and G. Gottstein: Acta Mater.,2001, vol. 49, pp. 1199-207.10.1016/S1359-6454(01)00020-9 ↗
41. X. Yang, Y. Okabe, H. Miura and T. Sakai: Mater. Des.,2012, vol. 36, pp. 626-32.10.1016/j.matdes.2011.12.001 ↗
42. A. Galiyev, R. Kaibyshev and T. Sakai: Mater. Sci. Forum,2003, vol. 419, pp. 509-14.10.4028/www.scientific.net/MSF.419-422.509 ↗
43. S. Sandlöbes, S. Zaefferer, I. Schestakow, S. Yi and R. Gonzalez-Martinez: Acta Mater.,2011, vol. 59, pp. 429-39.10.1016/j.actamat.2010.08.031 ↗
44. X. Li, P. Yang, L.-N. Wang, L. Meng and F. Cui: Mater. Sci. Eng. A,2009, vol. 517, pp. 160-69.10.1016/j.msea.2009.03.045 ↗
45. É. Martin, R. K. Mishra and J. J. Jonas: Philosophical Magazine,2011, vol. 91, pp. 3613-26.10.1080/14786435.2011.588613 ↗
46. E. Popova, A. Brahme, Y. Staraselski, S. Agnew, R. Mishra and K. Inal: Mater. Des.,2016, vol. 96, pp. 446-57.10.1016/j.matdes.2016.02.042 ↗
47. J. Koike: Metall. Mater. Trans. A,2005, vol. 36, pp. 1689-96.10.1007/s11661-005-0032-4 ↗
48. D. Ando, J. Koike and Y. Sutou: Acta Mater.,2010, vol. 58, pp. 4316-24.10.1016/j.actamat.2010.03.044 ↗
49. A. Sprecher, S. Mannan and H. Conrad: Acta Metall.,1986, vol. 34, pp. 1145-62.10.1016/0001-6160(86)90001-5 ↗
50. C. Li, K. Zhang, S. Jiang and Z. Zhao: Mater. Des.,2012, vol. 34, pp. 170-78.10.1016/j.matdes.2011.08.007 ↗
51. R. D. Doherty, D. A. Hughes, F. J. Humphreys, J. J. Jonas, D. J. Jensen, M. E. Kassner, W. E. King, T. R. McNelly, H. J. McQueen and A. D. Rollett: Mater. Sci. Eng. A,1997, vol. 238, pp. 219-74.10.1016/S0921-5093(97)00424-3 ↗
52. X. Liu and J. Wang: Sci. Rep.,2016, vol. 6, pp. 21393-400.10.1038/srep21393 ↗
53. É. Martin and J. J. Jonas: Acta Mater.,2010, vol. 58, pp. 4253-66.10.1016/j.actamat.2010.04.017 ↗
54. L. Guan, G. Tang, P. K. Chu and Y. Jiang: J. Mater. Res.,2009, vol. 24, pp. 3674-79.10.1557/jmr.2009.0436 ↗