journal article·2017-05Open access

Effect of Nb Addition to Ti-Bearing Super Martensitic Stainless Steel on Control of Austenite Grain Size and Strengthening

Xiaoping Ma, Brian Langelier, Baptiste Gault, Sundaresa Subramanian

Abstract

The role of Nb in normalized and tempered Ti-bearing 13Cr5Ni2Mo super martensitic stainless steel is investigated through in-depth characterization of the bimodal chemistry and size of Nb-rich precipitates/atomic clusters and Nb in solid solution. Transmission electron microscopy and atom probe tomography are used to analyze the samples and clarify precipitates/atom cluster interactions with dislocations and austenite grain boundaries. The effect of 0.1 wt pct Nb addition on the promotion of (Ti, Nb)N-Nb(C,N) composite precipitates, as well as the retention of Nb in solution after cooling to room temperature, are analyzed quantitatively. (Ti, Nb)N-Nb(C,N) composite precipitates with average diameters of approximately 24 ± 8 nm resulting from epitaxial growth of Nb(C,N) on pre-existing (Ti,Nb)N particles, with inter-particle spacing on the order of 205 ± 68 nm, are found to be associated with mean austenite grain size of 28 ± 10 µm in the sample normalized at 1323 K (1050 °C). The calculated Zener limiting austenite grain size of 38 ± 13 µm is in agreement with the experimentally observed austenite grain size distribution. 0.08 wt pct Nb is retained in the as-normalized condition, which is able to promote Nb(C, N) atomic clusters at dislocations during tempering at 873 K (600 °C) for 2 hours, and increases the yield strength by 160 MPa, which is predicted to be close to maximum increase in strengthening effect. Retention of solute Nb before tempering also leads to it preferentially combing with C and N to form Nb(C, N) atom clusters, which suppresses the occurrence of Cr- and Mo-rich carbides during tempering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. B. Qin, Z.Y. Wang and Q.S. Sun: Mater. Charact., 2008, vol. 59, pp. 1096–1100.10.1016/j.matchar.2007.08.025 ↗
2. Y.Y. Song, D.H. Ping, F.X. Yin, X.Y. Li and Y.Y. Li: Mater. Sci. Eng. A, 2012, vol. 527, pp. 614-18.10.1016/j.msea.2009.08.022 ↗
3. P.D. Bilmes, C.L. Llorente, C.M. Méndez and C.A. Gervasi: Corrosion. Sci., 2009, vol. 51, pp. 876-81.10.1016/j.corsci.2009.01.018 ↗
4. P.D. Bilmes, M. Solari and C.L. Llorente: Mater. Charact., 2001, vol. 46, pp. 285-96.10.1016/S1044-5803(00)00099-1 ↗
5. X.P. Ma, L.J. Wang, C.M. Liu and S.V. Subramanian: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6812 – 18.10.1016/j.msea.2011.05.065 ↗
6. Xiaoping Ma, Lijun Wang, Sundaresa Subramanian and Chunming Liu: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4475-86.10.1007/s11661-012-1268-4 ↗
7. E. Ladanova, J.K. Solberg and T. Rogne: Corrosion Eng. Sci. Technol., 2006, vol. 41, pp. 143–51.10.1179/174327806X107914 ↗
8. B. Gault, M. Moody, J. Cairney and S.P. Ringer: Atom Probe Microscopy, Springer Science, New York, 2012.10.1007/978-1-4614-3436-8 ↗
9. B.P. Geiser, D.J. Larson, E. Oltman, S.S. Gerstl, D.A. Reinhard, T.F. Kelly and T.J. Prosa: Microsc. Microanal., 2009, vol. 15 (S2), pp. 292–93.10.1017/S1431927609098249 ↗
10. B. Gault, D. Haley, F. de Geuser, M.P. Moody, E.A. Marquis, D.J. Larson and B.P. Geiser: Ultramicrosc., 2011, vol. 111, pp. 448–57.10.1016/j.ultramic.2010.11.016 ↗
11. B. Gault, M.P. Moody, F. de Geuser, G. Tsafnat, A. La Fontaine, L.T. Stephenson, D. Haley and S.P. Ringer: J. Appl. Phys., 2009, 105:034913.10.1063/1.3068197 ↗
12. M. Hillert and L.I. Staffanson: Acta Chemica Scandinavica, 1970, vol. 24, pp. 3618–26.10.3891/acta.chem.scand.24-3618 ↗
13. H. Zou: Ph.D. thesis, McMaster University, Canada, 1991.
14. L. Ryde: Mater. Sci. Tech., 2006, vol. 22, pp. 1297–1306.10.1179/174328406X130948 ↗
15. T. Gladman and F.B. Pickering: Yield, Flow and Fracture of Polycrystals, Applied Science Publishers, London, 1982, pp. 141-98.
16. S.V. Subramanian, F. Boratto, J.J. Jonas, C.M. Sellars: Proc. of Int. Symp. on Microalloyed Bar and Forging Steels, 1990, pp. 120–36.
17. S.G. Hong, K.B. Kang and C.G. Park: Scr. Mater., 2002, vol. 46, pp. 163-68.10.1016/S1359-6462(01)01214-3 ↗
18. T. Gladman: Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, U.K., 1997, pp. 82–87.
19. M. Kuzmina, M. Herbig, D. Ponge, S. Sandlobes and D. Raabe: Sci., 2015, vol. 349, pp. 1080–83.10.1126/science.aab2633 ↗
20. G.D.W. Smith, D. Hudson, P.D. Styman and C.A. Williams: Philos. Mag., 2013, vol. 93, pp. 3726–40.10.1080/14786435.2013.818257 ↗
21. C.A. Williams, J.M. Hyde, G.D.W. Smith and E.A. Marquis: J. Nucl. Mater., 2011, vol. 412, pp. 100–05.10.1016/j.jnucmat.2011.02.029 ↗
22. B. Gault, M.P. Moody, J.M. Cairney and S.P. Ringer: Mater. Today, 2012, vol. 15, pp. 378–86.10.1016/S1369-7021(12)70164-5 ↗
23. O.C. Hellman, J.A. Vandenbroucke, J. Rüsing, D. Isheim and D.N. Seidman: Microsc. Microanal., 2000, vol. 6, pp. 437–44.10.1007/S100050010051 ↗
24. P. Felfer, A. Ceguerra, S. Ringer and J. Cairney: Ultramicrosc., 2013, vol. 132, pp. 100–06.10.1016/j.ultramic.2013.03.004 ↗
25. P. Maugis and K. Hoummada: Scr. Mater., 2016, vol.120, pp. 90–93.10.1016/j.scriptamat.2016.04.005 ↗
26. F. Danoix, E. Bémont, P. Maugis and D. Blavette: Adv. Eng. Mater., 2006, vol. 8, pp. 1202-05.10.1002/adem.200600225 ↗
27. A. Deschamps, F. Danoix, F. De Geuser, T. Epicier, H. Leitner and M. Perez: Mater. Lett., 2011, vol.65, pp. 2265–68.10.1016/j.matlet.2011.03.110 ↗
28. M. Perez, E. Courtois, D. Acevedo, T. Epicier and P. Maugis: Mater. Sci. Forum, 2007, vol. 539-543, pp. 4196-4201.10.4028/www.scientific.net/MSF.539-543.4196 ↗
29. Bémont E. PhD. Rouen, Universite´ de Rouen, France, 2003.
30. E. Bémont, E. Cadel, P. Maugis, D. Blavette: Surf. Interface Anal., 2004, 36:585–88.10.1002/sia.1706 ↗
31. M.F. Ashby: 1 st Riso Int. Symp. on Metallurgy and Materials Science on Recrystallization and grain Growth in Multi-Phase Particle Containing Materials, 1980, pp. 325–36.
32. G.S. Rohrer: Trans. AIME, 1948, vol. 175, pp. 15–51, by C.S. Smith: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1063–100.10.1007/s11661-010-0215-5 ↗
33. J.W. Cahn: Acta Matell., 1962, vol. 10, pp. 789-98.10.1016/0001-6160(62)90092-5 ↗
34. H.S. Zurob, G. Zhu, S.V. Subramanian, G.R. Purdy, C.R. Hutchinson and Y. Brechet: ISIJ Int., 2005, vol. 45, pp. 713-22.10.2355/isijinternational.45.713 ↗
35. P. Gong, E.J. Palmiere and W.M. Rainforth: Acta Mater., 2015, vol. 97, pp. 392-403.10.1016/j.actamat.2015.06.057 ↗
36. M. Maalekian, R. Radis, M. Militzer, A. Moreau and W.J. Poole: Acta Mater., 2012, vol. 60, pp. 1015–26.10.1016/j.actamat.2011.11.016 ↗
37. C. Fossaert, G. Rees, T. Maurickx and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 21-30.10.1007/BF02669791 ↗
38. S.V. Subramanian, X. Ma, K. Rehman: Proc. Energy Mater., Xi’an China, 2014.
39. M.T. Nagata, J.G. Speer and D.K. Matlock: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3099-3110.10.1007/s11661-002-0294-z ↗
40. B. Dutta, E.J. Palmiere and C.M. Sellars: Acta Mater., 2001, vol. 49, pp. 785–94.10.1016/S1359-6454(00)00389-X ↗
41. F. Perrard, A. Deschamps and P. Maugis: Acta Mater., 2007, vol. 55, pp. 1255–66.10.1016/j.actamat.2006.10.003 ↗
42. F. Perrard, A. Deschamps, F. Bley, P. Donnadieu and P. Maugis: J. Appl. Crystallogr., 2006, vol. 39, pp. 473-82.10.1107/S002188980601301X ↗
43. K.Y. Xie, T. Zheng, J.M. Cairney, H. Kaul, J.G. Williams, F.J. Barbaro, C.R. Killmore and S.P. Ringer: Scr. Mater., 2012, vol. 66, pp. 710-13.10.1016/j.scriptamat.2012.01.029 ↗
44. T. Gladman: Mater. Sci. and Technol., 1999, vol. 15, pp. 30-36.10.1179/026708399773002782 ↗
45. M.F. Ashby: On the Orowan stress, in: A.S. Argon (Ed.), Physics of Strength and Plasticity, MIT Press, Cambridge, 1969, pp.113-31.
46. A.J. Breen, K.Y. Xie, M.P. Moody, B. Gault, H.W. Yen, C.C. Wong, J.M. Cairney, and S.P. Ringer: Microsc. Microanal., 2014, vol. 20, pp. 1100-10.10.1017/S1431927614012872 ↗
47. S.L. Shrestha, K.Y. Xie, C. Zhu, S.P. Ringer, C. Killmore, K. Carpenter, H. Kaul, J.G. Williams and J.M. Cairney: Mater. Sci. Eng. A, 2013, vol. 568, pp. 88–95.10.1016/j.msea.2013.01.021 ↗
48. S.L. Shrestha, K.Y. Xie, S.P. Ringer, K.R. Carpenter, D.R. Smith, C.R. Killmore and J.M. Cairney: Scr. Mater., 2013, vol. 69, pp. 481–84.10.1016/j.scriptamat.2013.06.007 ↗
49. A.G. Kostryzhev, A. Al Shahrani, C. Zhu, J.M. Cairney, S.P. Ringer, C.R. Killmore and E.V. Pereloma: Mater. Sci. Eng. A, 2014, vol. 607, pp. 226-35.10.1016/j.msea.2014.03.140 ↗
50. A.J. Ardell: Metall. Trans. A, 1985, vol. 16A, pp. 2131-65.10.1007/BF02670416 ↗
51. E.V. Pereloma, A. Shekhter, M.K. Miller and S.P. Ringer: Acta Mater., 2004, vol. 52, pp. 5589–5602.10.1016/j.actamat.2004.08.018 ↗
52. E.V. Pereloma, R.A. Stohr, M.K. Miller and S.P. Ringer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 3069-75.10.1007/s11661-009-9993-z ↗
53. S.P. Ringer: Mater. Sci. Forum, 2006, vol. 519-521, pp. 25-34.10.4028/www.scientific.net/MSF.519-521.25 ↗