Reverse Austenite Transformation and Grain Growth in a Low-Carbon Steel
Source abstract
Abstract
The mechanisms controlling the reverse austenite transformation and the subsequent grain growth are examined in a low-carbon steel during slow continuous heating. The ex-situ metallographic analysis of quenched samples is complemented by in-situ dilatometry of the phase transformation and real-time laser ultrasonic measurements of the austenite grain size. Although the initial state of the microstructure (bainite or martensite) has only limited impact on the austenite transformation temperature, it has significant influence on the mean austenite grain size and the rate of grain growth. The coarsening of austenite islands during reverse transformation occurring from the martensitic microstructure is responsible for a large austenite grain structure at the completion of the austenite formation. On the other hand, a much finer austenite grain size is obtained when the austenite transforms from the bainite microstructure. Upon further heating, the rate of austenite grain growth is limited by the presence of nanometric precipitates present in the bainite microstructure leading to a significantly finer austenite grain size. These results give important guidance for the design of thermomechanical-controlled processing of heavy-gage steel plates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. K. Araki, T. Yuasa, and Y. Tamura: Technical Report, JFE Steel Corporation, Kawasaki-cho, Chuo-ku, Chiba, Japan, 2013, vol. 18, pp. 56–62.
2. K. Ueda, A. Ohmori, S. Endo, and N. Shikanai: Curr. Adv. Mater. Processes: ISIJ, 2007, vol. 20(3), p. 465.
3. 3. Judd RR, and Paxton HW (1968) Trans. Metall. Soc. AIME, 1968, vol. 242, pp. 206–14.
4. M. Hillert, K. Nilsson, and L.E. Törndahl: J. Iron. St. Inst., 1971, vol. 209, pp. 49–65.
5. N.C. Law, and D.V. Edmonds: Metall. Mater. Trans. A., 1980, vol. 33, pp. 33–46.10.1007/BF02700436 ↗
6. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Trans. A., 1981, vol. 12, pp. 1419–28.10.1007/BF02643686 ↗
7. C.I. Garcia, and A.J. Deardo: Metall. Mater. Trans. A., 1981, vol. 12, pp. 521–30.10.1007/BF02648551 ↗
8. D.Z. Yang, E.L. Brown, D.K. Matlock, and G. Grauss: Metall. Trans. A., 1985, vol. 16, pp. 1385–92.10.1007/BF02658671 ↗
9. C. Garcia de Andrés, F.G. Caballero, and C. Capdevila: Scr. Mater., 1998, vol. 39, pp. 791–96.10.1016/S1359-6462(98)00146-8 ↗
10. D.V. Shtansky, K. Nakai, and Y. Ohmori: Acta Mater., 1999, vol. 47, pp. 2619–32.10.1016/S1359-6454(99)00142-1 ↗
11. F.G. Caballero, C. Capdevila, and C. Garcia de Andrés: Scr. Mater., 2000, vol. 42, pp. 1159–65.10.1016/S1359-6462(00)00352-3 ↗
12. F.G. Caballero, C. Capdevila, and C. Garcia de Andrés: Mater. Sci. Technol., 2001, vol. 17, pp. 1114–18.10.1179/026708301101511031 ↗
13. F.G. Caballero, C. Capdevila, and C. Garcia de Andrés: ISIJ Int., 2001, vol. 41, pp. 1093–102.10.2355/isijinternational.41.1093 ↗
14. F.G. Caballero, C. Capdevila, and C. Garcia de Andrés: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1283–91.10.1007/s11661-001-0218-3 ↗
15. C. Zhang, L. Zhou, X. Liu, X. Wu, and Y. Liu: Steel Res. Int., 2014, vol. 85(10), pp. 1453–58.10.1002/srin.201300386 ↗
16. S.D. Martín, T. de Cock, A. García-Junceda, F.G. Caballero, C. Capdevila, and C.G. de Andrés: Mater. Sci. Technol., 2008, vol. 24(3), pp. 266–72.10.1179/174328408X265640 ↗
17. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: Metal. Mater. Trans. A, 2011, vol. 42, pp. 1544–57.10.1007/s11661-010-0551-5 ↗
18. G. Molinder: Acta Metall., 1956, vol. 4, pp. 565–71.10.1016/0001-6160(56)90157-2 ↗
19. R.C. Reed, Z. Shen, T. Akbay, and J. M. Robinson: Mater. Sci. Eng. A, 1997, vol. 232, pp. 140–49.10.1016/S0921-5093(97)00113-5 ↗
20. R.C. Reed, T. Akbay, Z. Shen, J. M. Robinson, and J. H. Root: Mater. Sci. Eng. A, 1998, vol. 256, pp. 152–65.10.1016/S0921-5093(98)00800-4 ↗
21. Q. Lai, M. Goune, A. Perlade, T. Pardoen, P. Jacques, O. Bouaziz, and Y. Bréchet: Metal. Mater. Trans. A, 2016, vol. 47, pp. 3375–8610.1007/s11661-016-3547-y ↗
22. J.J. Yi, I.S. Kim, and H.S. Choi: Metall. Trans. A., 1985, vol. 16, pp. 1237–45.10.1007/BF02670328 ↗
23. J.R. Yang: Mater. Sci. Eng. A, 1991, vol. 131, pp. 99–113.10.1016/0921-5093(91)90349-R ↗
24. J.R. Yang, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1991, vol. 131, pp. 99–113.10.1016/0921-5093(91)90349-R ↗
25. C. Philippot, J. Drillet, P. Maugis, V. Hebert, and M. Dumont: Metall. Res. Technol., 2014, vol. 111(1), pp. 3–810.1051/metal/2014004 ↗
26. E. López-Martínez, O. Vázquez-Gómez, H.J. Vergara-Hernández, and B. Campillo: Int. J. Miner. Metall. Mater., 2015, vol. 22(12), pp. 1304–12.10.1007/s12613-015-1198-4 ↗
27. J. Huang, W.J. Poole, and M. Militzer: Metal. Mater. Trans. A, 2004, vol. 35, 3363–75.10.1007/s11661-004-0173-x ↗
28. M. Kulakov, W.J. Poole, and M. Militzer: Metal. Mater. Trans. A, 2013, vol. 44, pp. 3564–76.10.1007/s11661-013-1721-z ↗
29. A. Chbihi, D. Barbier, L. Germain, A. Hazotte, and M. Gouné: J. Mater. Sci., 2014, vol. 49(10), pp. 3608–21.10.1007/s10853-014-8029-2 ↗
30. D. Barbier, L. Germain, A. Hazotte, M. Gouné, and A. Chbihi: J. Mater. Sci., 2015, vol. 50(1), pp. 374–8110.1007/s10853-014-8596-2 ↗
31. Y. Mazaheri, A. Kermanpur, A. Najafizadeh, and A. G. Kalashami: Metall. Mater. Trans. A, 2016, vol. 47(3), pp. 1040–51.10.1007/s11661-015-3288-3 ↗
32. D.-W. Suh, C.-S. Oh, and S.-J. Kim: Met. Mater. Int., 2008, vol. 14(3), pp. 275–82.10.3365/met.mat.2008.06.275 ↗
33. P. Li, J. Li, Q. Meng, W. Hu, and D. Xu: J. Alloys Compd., 2013, vol. 578, pp. 320–27.10.1016/j.jallcom.2013.05.226 ↗
34. P. Li, J. Li, Q. Meng, W. Hu, and D. Xu: Ironmak. Steelmak., 2015, vol. 42(2), pp. 81–87.10.1179/1743281214Y.0000000228 ↗
35. G. Liu, J. Li, S. Zhang, J. Wang, and Q. Meng: J. Alloys Compd., 2016, vol. 666, pp. 309–16.10.1016/j.jallcom.2016.01.137 ↗
36. N. Li, J. Lin, D.S. Balint, and T.A. Dean: J. Mater. Process. Technol., 2016, vol. 231, pp. 254–64.10.1016/j.jmatprotec.2015.12.008 ↗
37. A. Karmakar, M. Ghosh, and D. Chakrabarti: Mater. Sci. Eng. A, 2013, vol. 564, pp. 389–99.10.1016/j.msea.2012.11.109 ↗
38. F. Fazeli, M. Militzer: J. Iron Steel Res. Int., 2011, vol. 18(1–2), pp. 658–63.
39. H. Farahani, W. Xu, and S. van der Zwaag: Metall. Mater. Trans. A, 2015, vol. 46(11), pp. 4978–85.10.1007/s11661-015-3081-3 ↗
40. C. Zheng, and D. Raabe: Acta Mater., 2013, vol. 61(14), pp. 5504–17.10.1016/j.actamat.2013.05.040 ↗
41. H. Azizi-Alizamini, and M. Militzer: Int. J. Mater. Res., 2010, vol. 101, 534–4110.3139/146.110307 ↗
42. B. Zhu, and M. Militzer: Metal. Mater. Trans. A, 2015, vol. 46, pp. 1073–84.10.1007/s11661-014-2698-y ↗
43. M. Kulakov, W.J. Poole, and M. Militzer: ISIJ Int., 2014, vol. 54, pp. 2627–26.10.2355/isijinternational.54.2627 ↗
44. N. Li, J. Lin, D.S. Balint, and T.A. Dean: J. Mater. Process. Technol., 2016, vol. 237, pp. 394–401.10.1016/j.jmatprotec.2016.06.006 ↗
45. H. Li, K. Gai, L. He, C. Zhang, H. Cui, and M. Li: Mater. Des., 2016, vol. 92, pp. 731–41.10.1016/j.matdes.2015.12.110 ↗
46. Y-K. Lee, H.C. Shin, D.S. Leem, J-Y. Choi, W. Jin, and C.S. Choi: Mater. Sci. Technol., 2003, vol. 19, pp. 393–98.10.1179/026708303225009742 ↗
47. T. Shirane, S. Tsukamoto, K. Tsuzaki, Y. Adachi, T. Hanamura, M. Shimizu, and F. Abe: Sci. Technol. Weld. Joining, 2009, vol. 14, pp. 698–707.10.1179/136217109X12505932584853 ↗
48. S.T. Kimmins, D.J. Gooch: Metal Sci., 1983, vol. 17, pp. 519–32.10.1179/030634583790420484 ↗
49. T. Hara, N. Maruyama, Y. Shinohara, H. Asahi, G. Shigesato, M. Sugiyama, and T. Koseki: ISIJ Int., 2009, vol. 49(11), pp. 1792–1800.10.2355/isijinternational.49.1792 ↗
50. C. Wang, R. Fu, and W. Zhou: Mater. Sci. Eng., A, 2006, vol. 438–440, pp. 1135–38.10.1016/j.msea.2006.02.164 ↗
51. V.D. Sadovskii, N.M. Rodigin, L.V. Smirnov, G.M. Filonchik, and I.G. Fakidov: Fiz. Metal. Metalloved, 1961, vol. 12, p. 302.
52. T. Kakeshita, and T. Saburi: Met. Mater., 1997, vol. 3(2), pp. 87–96.10.1007/BF03026130 ↗
53. N. Nakada, T. Tsuchiyama, S. Takaki, and S. Hashizume: ISIJ Int., 2007, vol. 47(10), pp. 1527–32.10.2355/isijinternational.47.1527 ↗
54. S. Watanabe, T. Kunitake: Tetsu to Hagane, 1975, vol. 61, pp. 96–106.10.2355/tetsutohagane1955.61.1_96 ↗
55. S.J. Davies, C. Edwards, G.S. Taylor, and S.B. Palmer: J. Phys. D, 1993, vol. 26, pp. 329–48.10.1088/0022-3727/26/3/001 ↗
56. J.P. Monchalin: Rev. Quant. Nondestruct. Eval., 2004, vol. 23, pp. 3–31.10.1063/1.1711602 ↗
57. M. Dubois, M. Militzer, A.Moreau, and J. F. Bussière: Scripta. Mater., 2000, vol. 42, pp. 867–74.10.1016/S1359-6462(00)00305-5 ↗
58. S. Kruger, G. Lamouche, J.P. Monchalin, R. Kolark, G. Jeskey, and M. Choquet: Iron Steel Technol., 2005, vol. 2, pp. 25–31.
59. S. Sarkar, A. Moreau, M. Militzer, and W.J. Poole: Metall. Mater. Trans., A, 2008, vol. 39, 897–907.10.1007/s11661-007-9461-6 ↗
60. M. Maalekian, R. Radis, M. Militzer, A. Moreau, and W.J. Poole: Acta Mater., 2012, vol. 60, pp 1015–26.10.1016/j.actamat.2011.11.016 ↗
61. S.E. Kruger, and E.B. Damm: Mater. Sci. Eng. A, 2006, vol. 425, pp 238–43.10.1016/j.msea.2006.03.056 ↗
62. A. Moreau, D. Lévesque, M. Lord, M. Dubois, J.P. Monchalin, C. Padioleau, and J.F. Bussière: Ultrasonics, 2002, vol. 40, pp. 1047–56.10.1016/S0041-624X(02)00255-X ↗
63. T. Garcin, J.H. Schmitt, and M. Militzer: J. Alloys Compd., 2016, vol. 670, pp. 329–36.10.1016/j.jallcom.2016.01.222 ↗
64. T. Garcin: CTOME V1.56: Software for the Analysis of Ultrasound Wave Properties in Metal. www.ctome.org.
65. ASTM A1033-10: Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations. ASTM International, West Conshohocken, PA, 2015, www.astm.org.
66. Z. Nishiyama: Martensite transformation, 1978, Academic press Inc, New York, ISBN 0-12-519850-7.
67. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 2002, pp. 137–84.
68. T. Gladman: Heat Treatment of Metals (UK), 1994, vol. 21, pp. 11–14.
69. R. Radis and E. Kozeschnik, Modelling Simul. Mater. Sci. Eng., 2010, vol. 18, p. 055003.10.1088/0965-0393/18/5/055003 ↗
70. A. Brahmi and R. Borelli, Acta Mater., 1997, vol. 45, pp. 1889-97.10.1016/S1359-6454(96)00333-3 ↗
71. V. Massardier, V. Guetaz, J. Merlin and M. Solar: Mater. Sci. Eng. A, 2003, vol. 355, pp. 299–310.10.1016/S0921-5093(03)00080-7 ↗
72. L.M. Cheng, E.B. Hawbolt, T.R. Meadowcroft, Metall. Mater. Trans. A., 2000, vol. 31, pp. 1907–16.10.1007/s11661-000-0218-8 ↗
73. L.M. Cheng, E.B. Hawbolt, T.R. Meadowcroft, Scr. Mater., 1999, vol. 41, pp. 673–8.10.1016/S1359-6462(99)00108-6 ↗
74. M. Militzer, A. Giumelli, E.B. Hawbolt and T.R. Meadowcroft, Metall. Mater. Trans. A, 1996, vol. 27, pp. 3399–409.10.1007/BF02595433 ↗
75. N. Gao and T.N. Baker, ISIJ Int. 1998, vol. 18, pp. 744–51.10.2355/isijinternational.38.744 ↗
76. G.R. Speich, J. Cuddy, C.R. Gordan and A.J. DeArdo, Phase Transformation in Ferrous Alloys (Warrendale, PA: The Metallurgical Society of AIME) pp. 341–89.