Assessment of Ductile-to-Brittle Transition Behavior of Localized Microstructural Regions in a Friction-Stir Welded X80 Pipeline Steel with Miniaturized Charpy V-Notch Testing
Source abstract
Abstract
Friction-stir welding (FSW) is an alternative welding process for pipelines. This technology offers sound welds, good repeatability, and excellent mechanical properties. However, it is of paramount importance to determine the toughness of the welds at low temperatures in order to establish the limits of this technology. Ductile-to-brittle transition curves were generated in the present study by using a small-scale instrumented Charpy machine and miniaturized V-notch specimens (Kleinstprobe, KLST); notches were located in base metal, heat-affected, stirred, and hard zones within a FSW joint of API-5L X80 Pipeline Steel. Specimens were tested at temperatures between 77 K (-196 °C) and 298 K (25 °C). Based on the results obtained, the transition temperatures for the base material and heat-affected zone were below 173 K (-100 °C); conversely, for the stirred and hard zones, it was located around 213 K (-60 °C). Fracture surfaces were characterized and showed a ductile fracture mechanism at high impact energies and a mixture of ductile and brittle mechanisms at low impact energies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. S.Y. Shin, B. Hwang, S. Lee, N.J. Kim, and S.S. Ahn: Mater. Sci. Eng. A, 2007, vol. 458, pp. 281-289.10.1016/j.msea.2006.12.097 ↗
2. E. Lucon: Testing of Small-Sized Specimens, in Comprehensive Materials Processing, vol. 1, Elsevier Ltd, Pennsylvania, 2014, pp. 135–63.10.1016/B978-0-08-096532-1.00110-2 ↗
3. ASTM: Standard Test Method for Instrumented Impact Testing of Metallic Materials, ASTM Standard E2298-13a, ASTM, Philadelphia, PA, 2014.
4. ISO: Steel-Charpy V-Notch Pendulum Impact Test—Instrumented Test Method, ISO Standard 14556, ISO, Geneva, 2000.
5. ASTM: Standard Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens, ASTM Standard E2248-13, ASTM, Philadelphia, PA, 2013.
6. P. Xue, Y. Komizo, R. Ueji, and H. Fujii: Mater. Sci. Eng. A, 2014, vol. 606, pp. 322–329.10.1016/j.msea.2014.03.058 ↗
7. S.H. Nahm, A. Kim, and J. Park: Int J Impact Eng, 2001, vol. 2001, pp. 805–816.10.1016/S0734-743X(01)00006-9 ↗
8. H.S. Cho, H. Ohkubo, N. Iwata, A. Kimura, S. Ukai, and M. Fujiwara: Fusion Eng. Des., 2006, vol. 81, pp. 1071–1076.10.1016/j.fusengdes.2005.09.056 ↗
9. ISO: Petroleum and Natural Gas Industries-Steel Pipe for Pipeline Transportation Systems, ISO Standard 3183, ISO, Geneva, 2007.
10. F.C.L. Passagem: Master’s thesis, Universidade de São Paulo, São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-05042011-140912/pt-br.php (in Portuguese).
11. P.J. Konkol and M.F. Mruczek: Weld. J. (Miami, FL, USA), 2007, vol. 86, pp. 187s–95s.
12. T.F. Santos, T.F. Hermenegildo, C.R.M. Afonso, R.R. Marinho, M.T.P. Paes, and A.J. Ramirez: Eng. Fract. Mech., 2010, vol. 77, pp. 2937–2945.10.1016/j.engfracmech.2010.07.022 ↗
13. J.A.D. Ávila, C.O.F.T. Ruchert, P.R. Mei, R.M. Reppold, M.T.P. Piza, and A.J. Ramirez: Eng. Fract. Mech., 2015, vol. 147, pp. 176–186.10.1016/j.engfracmech.2015.08.006 ↗
14. ASTM: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, ASTM Standard E23-12c, ASTM, Philadelphia, PA, 2013.
15. E. Lucon: J. Test. Eval., 2001, vol. 41, pp. 1–9.10.1520/JTE20120195 ↗
16. W.J. Kyffin: TWI Industrial Member Report Summary 880/2007, The Welding Institute, Cambridge, 2007.
17. D.P. Fairchild, A. Kumar, S.J. Ford, N. Nissley, R. Ayer, H.W. Jin, and A. Ozekcin: Proc. Trends Weld. Res. 8th Int. Conf. Pine Mountain, GA, 2009, pp. 371–80.
18. A. Tribe: Master’s thesis, Brigham Young University, Provo, Utah, 2012. http://scholarsarchive.byu.edu/etd/3740/.
19. H. Aydin and T.W. Nelson: Mater. Sci. Eng. A, 2013, vol. 586, pp. 313–322.10.1016/j.msea.2013.07.090 ↗
20. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937–945.10.2355/isijinternational.35.937 ↗
21. H. Kyung-Sung, D. Ho-Lee, S. Yong-Shin, S. Lee, J. Yong-Yoo, and B. Hwang: Mater. Sci. Eng. A, 2015, vol. 624, pp. 14–22.10.1016/j.msea.2014.11.035 ↗
22. J.S. Kang, J.-B. Seol, and C.G. Park: Mater. Charact., 2013, vol. 79, pp. 110–121.10.1016/j.matchar.2013.02.009 ↗
23. M.F. Sinfield: Ph.D. thesis, The Ohio State University, Columbus, OH, 2007. https://etd.ohiolink.edu/!etd.send_file?accession=osu1143252009&disposition=inline.
24. H. Aydin: Mater. Technol., 2014, vol. 48, pp. 15–22.
25. H.-H. Cho, S.H. Kang, S.-H. Kim, K.H. Oh, H.J. Kim, W.-S. Chang, and H.N. Han: Mater. Des., 2012, vol. 34, pp. 258–267.10.1016/j.matdes.2011.08.010 ↗
26. X. Li, X. Ma, S. V. Subramanian, and C. Shang: Int. J. Fract., 2015, vol. 193, pp. 131–139.10.1007/s10704-015-0024-3 ↗
27. S.Y. Han, S.Y. Shin, S. Lee, N.J. Kim, J. Bae, and K. Kim: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 239–251.
28. X. Zhang, H. Gao, X. Zhang, and Y. Yang: Mater. Sci. Eng. A., 2012, vol. 531, pp. 84–90.10.1016/j.msea.2011.10.035 ↗
29. M. de C. Silva: Master’s thesis, Universidade de São Paulo, Sao Paulo, 2004. http://www.teses.usp.br/teses/disponiveis/3/3135/tde-11022005-162828/pt-br.php (in Portuguese).
30. M.A. Sokolov and D.J. Alexander: improved correlation procedure for subsize and full-size charpy impact specimen data, NUREG/CR-6379, ORNL-6888, Oak Ridge National Laboratory, Oak Ridge, TN, 1997.10.2172/463630 ↗
31. W. Oldfield, ASTM Standardisation News, 1975, vol. 3, pp. 24-29.
32. R. Schill, P. Forget, and C. Sainte-Catherine: Thirteen. Eur. Conf. Fract. Sebastián, 2000, pp. 1–8.
33. T.L. Anderson, Fracture Mechanics: Fundamentals and Applications, 3rd edn, p. 640, CRC Press, Boca Raton, 2005.10.1201/9781420058215 ↗
34. C. Sainte Catherine, C. Poussard, J. Vodinh, R. Schill, N. Hourdequin, P. Galon, and P. Forget: Finite Element Simulations and Empirical Correlation for Charpy-V and Subsize Charpy Tests on an Unirradiated Low-Alloy RPV Ferritic Steel, ASTM STP 1418, M.A, Sokolov, J.D. Landes and G.E. Lucas, Eds., ASTM, Philadelphia, PA, 1990, pp. 107–36.10.1520/STP10817S ↗
35. K. Dohi, N. Soneda, T. Onchi, and H. Matsui: Correlation Between Subsize and Full-Size Charpy Impact Properties of Neutron-Irradiated Reactor Pressure Vessel Steels, ASTM STP 1418, M.A, Sokolov, J.D. Landes, and G.E. Lucas, Eds., ASTM, Philadelphia, PA, 1990, pp. 137–50.10.1520/STP10818S ↗
36. E. Lucon, R. Chaouadi, A. Fabry, J.-L. Puzzolante, and E. Van Characterizing: Material Properties by the Use of Full-Size and Subsize Charpy Tests: An Overview of Different Correlation Procedures, ASTM STP 1380, T.A. Siewert and M.P. Manahan, Eds., ASTM, Philadelphia, PA, 2000, pp. 146–63.10.1520/STP14392S ↗
37. A. Lakshminarayanan, V. Balasubramanian, M. Salahuddin: J. Iron Steel Res. Int., 2010, vol. 17, pp. 68–74.10.1016/S1006-706X(10)60186-0 ↗
38. H.G. Hillenbrand, M. Graf, and C. Kalwa: Int. Symp. Niobium, Orlando, FL, 2002, pp. 543–69.