Effect of Growth Rate on the Microstructure and Microhardness in a Directionally Solidified Al-Zn-Mg Alloy
Source abstract
Abstract
The Al-5.5Zn-2.5Mg (wt pct) ternary alloy was prepared using a vacuum melting furnace and a casting furnace. Five samples were directionally solidified upwards at a constant temperature gradient (G = 5.5 K/mm) under different growth rates (V = 8.3–165 μm/s) in a Bridgman-type directional solidification furnace. The primary dendrite arm spacing, λ 1, secondary dendrite arm spacing, λ 2, and microhardness, HV, of the samples were measured. The effects of V on λ 1, λ 2 and HV properties of the Al-Zn-Mg alloy were studied by microstructure analysis and mechanical characterization. Microstructure characterization of the alloys was carried out using optical microscopy, scanning electron microscopy, wavelength-dispersive X-ray fluorescence spectrometry, and energy dispersive X-ray spectroscopy. From the experimental results, it is found that the λ 1, λ 2 values decrease, but HV values increase with the increase in V, and HV values decrease with the increase in λ 1 and λ 2. Dependencies of dendritic spacing and microhardness on the growth rate were determined using linear regression analysis. The growth rate, microstructure, and Hall–Petch-type relationships obtained in this work have been compared with the results of previous studies.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. I. Polmear: Light alloys: From Traditional Alloys to Nanocrystals, Butterworth-Hinemann, 4th ed., London, 2005.
2. M. Gündüz and E. Çadırlı: Mater. Sci. Eng. A., 2002, vol. 327, pp.167–185.10.1016/S0921-5093(01)01649-5 ↗
3. R. Ghiaasiaan, X. Zeng, and S. Shankar: Mater. Sci. Eng. A.,2014, vol. 594, pp.360–277.10.1016/j.msea.2013.11.087 ↗
4. L.M. Wu, W.H. Wang, Y.F. Hsu, and S. Trong: J. Alloys Compd., 2008, vol. 56, pp.163–169.10.1016/j.jallcom.2007.02.054 ↗
5. S. Guo, Z.L. Ning, M.X. Zhang, F.Y. Cao, and J.F. Sun: Mater. Charact., 2014, vol. 87, pp. 62–69.10.1016/j.matchar.2013.10.030 ↗
6. Y.L. Deng, Y.Y. Zhang, L. Wan, A.A. Zhu, and X.M. Zhang: Metall. Mater. Trans. A, 2013, vol. 44, pp.2470–2477.10.1007/s11661-013-1639-5 ↗
7. B.I. Jung, C.H. Jung, T.K. Han, and Y.H. Kim: J. Mater. Process. Technol., 2001, vol. 111, pp.69–73.10.1016/S0924-0136(01)00514-3 ↗
8. X. Jian, H. Xu, T.T. Meek, and Q. Han: Mater. Lett., 2005, Vol. 59, pp.190-193.10.1016/j.matlet.2004.09.027 ↗
9. E. Çadırlı, H. Kaya, D. Rabiger, S. Eckert, and M. Gündüz: J. Alloys Compd., 2015, vol. 647, pp. 471-480.10.1016/j.jallcom.2015.05.162 ↗
10. J. Wang, S. He, B. Sun, Q. Guo, M. Nishio: J. Mater. Process. Technol., 2003, vol. 141, pp.29–34.10.1016/S0924-0136(02)01007-5 ↗
11. H. Liao, Y. Sun, and G. Sun: Mater. Sci. Eng. A.,2002, vol. 335, pp.62–66.10.1016/S0921-5093(01)01949-9 ↗
12. E. J. Abed: Int. J. Eng. Technol., 2011, vol.11, pp.34–44.
13. D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, 2nd ed., Chapman and Hall, London, 1992.10.1007/978-1-4899-3051-4 ↗
14. E.J. Lavernia, J.D. Ayers, and T.S. Srivatsan: Int. Mater. Rev., 1992, vol. 37, pp. 1–44.10.1179/imr.1992.37.1.1 ↗
15. E. Çadırlı: Met. Mater. Int., 2013, vol. 19, pp.411–422.10.1007/s12540-013-3006-x ↗
16. M.H. Avazkonandeh-Gharavol, M. Haddad-Sabzevar, and H. Fredriksson: J. Alloys Comp.,2014, vol. 610, pp. 462–471.10.1016/j.jallcom.2014.05.026 ↗
17. F. Yang, L. Peng, and K. Okazaki: Metall. Mater. Trans. A, 2004, vol. 35, pp.3323–3328.10.1007/s11661-006-0238-0 ↗
18. W. R. Osório, L. C. Peixoto, M. V. Canté, and A. Garcia: Mater. Design, 2010, vol. 31, pp. 4485–4489.10.1016/j.matdes.2010.04.045 ↗
19. H. Kaya, E. Çadırlı, M. Gündüz, and A.Ülgen:, J. Mater. Eng. Perf., 2003, vol. 12, pp.544–551.10.1361/105994903100277201 ↗
20. K.S. Cruz, E.S. Meza, F.A.P. Fernandes, J.M.V. Quaresma, L.C. Casteletti, and A. Garcia: Metall. Mater. Trans. A, 2010, vol. 41, pp. 972–984.10.1007/s11661-009-0161-2 ↗
21. J.D. Hunt: Solidification and Casting of Metals, The Metal Society, London, 1979.
22. R. Trivedi: Metall. Trans. A, 1984, vol. 15, pp. 977–982.10.1007/BF02644689 ↗
23. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
24. T. Okamoto and K. Kishitake: J. Cryst. Growth, 1975, vol. 29, pp. 137–146.10.1016/0022-0248(75)90217-1 ↗
25. R. Trivedi and K. Somboonsuk: Mater. Sci. Eng., 1984, vol. 65, pp. 65–74.10.1016/0025-5416(84)90200-3 ↗
26. D. Bouchard and J.S. Kirkaldy: Metall. Mater. Trans. B, 1997, vol. 28, pp.651–663.10.1007/s11663-997-0039-x ↗
27. W.W. Mullins and R.F. Sekerka: J. App. Physics, 1964, vol. 35, pp. 444–451.10.1063/1.1713333 ↗
28. E.O. Hall: Proc. Phys. Soc. (Lond.), 1951, vol. 64B, pp. 747–753.10.1088/0370-1301/64/9/303 ↗
29. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
30. W.R. Osorio and A. Garcia: Mater. Sci. Eng. A.,2002, vol. 325, pp.103–111.10.1016/S0921-5093(01)01455-1 ↗
31. W. Blum, Y.J. Li, J. Chen, X.H. Zeng, and K. Lu: Int. J. Mater. Res., 2006, vol. 97, pp. 1661–1666.10.3139/146.101398 ↗
32. H. Sun and Y. Shi: J. Mater. Sci. Technol., 2009, vol. 25, pp. 347–350.10.1179/174328408X265668 ↗
33. C.E. Carlton and P.J. Ferreira: Acta Mater., 2007, vol. 55, pp. 3749–3756.10.1016/j.actamat.2007.02.021 ↗
34. A. Munitz: Metall. Trans. B, 1985, vol. 16, pp. 149–161.10.1007/BF02657500 ↗
35. M. Zimmermann, M. Carrard, and W. Kurz: Acta Metall., 1989, vol. 37, pp. 3305–3313.10.1016/0001-6160(89)90203-4 ↗
36. C.D. Lee: Mater. Sci. Eng. A.,2007, vol. 459, pp.355–360.10.1016/j.msea.2007.01.008 ↗
37. D.A. Petrov, in: G. Petzow, G.E. Effenberg (Eds.): Ternary Alloys, vol. 3, VCH, Weinheim, Germany, 1986.
38. R. Shao: Ph.D. thesis, Purdue University, West Lafayette, IN, 2007.
39. S. Ganesan, C. L. Chan, and D. R. Poirier: Mater. Sci. Eng. A, 1992, vol. 151, pp. 97–105.10.1016/0921-5093(92)90186-5 ↗
40. M. S. Bhat, D. R. Poirier, and J. C. Heinrich: Metall. Mater. Trans B, 1995, vol. 26, pp. 1049–1056.10.1007/BF02654107 ↗
41. Z. Chen, Y. Mo, and Z. Nie: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3910–3920.10.1007/s11661-013-1731-x ↗
42. L. Lasa and J.M. Rodrigues-Ibade: Mater. Sci. Eng. A, 2003, vol. 363, pp. 193–202.10.1016/S0921-5093(03)00633-6 ↗
43. C. Brito, T.A. Costa, T.A. Vida, F. Bertelli, N. Cheung, J. E. Spinelli, and A. Garcia: Metall. Mater. Trans. A, 2015, vol. 46, pp. 3342–3355.10.1007/s11661-015-2967-4 ↗
44. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans. Tech. Publications, Aedermannsdorf, Switzerland, 1989.
45. M. Gündüz, H. Kaya, E. Çadırlı, N. Maraşlı, K. Keşlioğlu, and B. Saatçi: J. Alloys Compd., 2007, vol. 439, pp. 114–127.10.1016/j.jallcom.2006.08.246 ↗
46. A. Berkdemir and M. Gündüz: Mater. Sci. Forum, 2010, vol. 649, pp. 425–430.10.4028/www.scientific.net/MSF.649.425 ↗
47. H. Kaya, E. Çadırlı, and M. Gündüz: Appl. Phys. A, 2009, vol. 94, pp. 155–165.10.1007/s00339-008-4714-9 ↗
48. D.G. McCartney and J.D. Hunt: Acta Mater., 1981, vol. 29, pp. 1851–1863.10.1016/0001-6160(81)90111-5 ↗
49. H. Tunca and R. W. Smith: J. Mater. Sci., 1988, vol. 23, pp. 111–120.10.1007/BF01174041 ↗
50. V. Laxmanan: Acta Metall., 1985, vol. 33, pp. 1023–1035.10.1016/0001-6160(85)90196-8 ↗
51. D. Ma and P.R. Sahm: Metall. Mater. Trans. A, 1998, vol. 29, pp. 1113–1119.10.1007/s11661-998-1020-2 ↗
52. J. Campbell: Castings, Butterworth-Heinemann, Oxford, UK, 1991.
53. E.L. Rooy: Metals Handbook, vol. 15, Castings, ASM International, Metals Park, OH, 1988.
54. E. Çadırlı, U. Böyük, H. Kaya, and N. Maraşlı: J. Non-Cryst. Solids, 2011, vol. 357, pp. 2876–2881.10.1016/j.jnoncrysol.2011.03.025 ↗
55. X. Hu, K. Li, and F. Ai: China Foundry, 2012, vol. 9, pp. 360–365.
56. J.T. Guo, C.M. Xu, X.H. Du, and H.Z. Fu: Mater. Lett., 2004, vol. 58, pp. 3233–3236.10.1016/j.matlet.2004.02.047 ↗
57. F. Vnuk, M. Sahoo, D. Baragor, and R.W. Smith: J. Mater. Sci., 1980, vol. 15, pp. 2573–2583.10.1007/BF00550762 ↗
58. J. Lapin and J. Marecek: Intermetallics, 2006, vol. 14, pp. 1339–1344.10.1016/j.intermet.2005.10.016 ↗
59. U. Böyük, S. Engin, and N. Maraşlı: J. Min. Metall. Sect. B-Metall., 2015, vol. 51, pp. 67 –72.10.2298/JMMB140304007B ↗
60. H. Kaya, M. Gündüz, E. Çadırlı, and N. Maraslı: J. Alloys Compd., 2009, vol. 478, pp. 281–286.10.1016/j.jallcom.2008.11.164 ↗
61. X. Hu, W. Chen, and B. Wu: Mater. Sci. Eng. A, 2012, vol. 556, pp. 816–823.10.1016/j.msea.2012.07.073 ↗
62. J. Lapin, L. Ondrus, and M. Nazmy: Intermetallics, 2002, vol. 10, pp. 1019–1031.10.1016/S0966-9795(02)00119-X ↗
63. J. Fan, X. Li, Y. Su, J. Guo, and H. Fu: J. Alloy Compd., 2010, vol. 504, pp. 60–64.10.1016/j.jallcom.2010.05.095 ↗
64. U. Böyük, N. Maraşlı, E. Çadırlı, H. Kaya, and K. Keşlioğlu: Curr. Appl. Phys., 2012, vol. 12, pp. 7–10.10.1016/j.cap.2011.04.018 ↗
65. S. Engin, U. Böyük, H. Kaya, and N. Maraşlı: Int. J. Min. Met. Mater., 2011, vol. 18, pp. 659–664.10.1007/s12613-011-0492-z ↗
66. X.W. Hu, S.M. Li, S.F. Gao, L. Liu, and H.Z. Fu: J. Alloy Compd., 2010, vol. 493, pp. 116–121.10.1016/j.jallcom.2009.12.086 ↗
67. H. Kaya, E. Çadırlı, U. Böyük, and N. Maraslı: App. Surf. Sci., 2008, vol. 255, pp. 3071–3078.10.1016/j.apsusc.2008.08.080 ↗
68. S. Khan, A. Ourdjini, Q.S. Hamed, M.A.A. Najafabadi, and R. Elliott: J. Mater. Sci., 1993, vol. 28, pp. 5957– 5962.10.1007/BF00365208 ↗
69. H. Kaya, U. Böyük, E. Çadırlı, and N. Maraşlı: Met. Mater. Int., 2013, vol. 19, pp. 39–44.10.1007/s12540-013-1007-4 ↗
70. X.W. Hu, S.M. Li, S.F. Gao, L. Liu, and H. Fu: Trans. Nonferrous. Met. Soc. China, 2011, vol. 21, pp. 65–71.10.1016/S1003-6326(11)60679-1 ↗
71. M.E. Gliksman, R.J. Schaefer, and J.D. Ayers: Metall. Trans. A, 1976, vol. 7, pp. 1747–1759.10.1007/BF03186673 ↗
72. S. Henry, T. Minghetti, and M. Rappaz: Acta Mater., 1998, vol. 46, pp. 6431–644310.1016/S1359-6454(98)00308-5 ↗
73. L.Yu, G.L. Ding, J. Reye, S.N. Ojha, and Tewari: Metall. Mater. Trans. A, 2000, vol. 31, pp. 2275–2285.10.1007/s11661-000-0144-9 ↗
74. J. Zhang, X. Ma, H. Ren, L. Chen, Z. Jin, Z. Li, and J. Shen: JOM, 2016, vol. 68, pp.178–184.10.1007/s11837-015-1671-6 ↗
75. J.W. Martins: Precipitation Hardening, 2nd ed., Butterworth-Heinemann, Oxford, UK, 1998.
76. H. Tecer: Ph.D. thesis, Erciyes University, Kayseri, Turkey, 2013.
77. H. Li, J. Bin, J. Liu, Z. Gao, and X. Lu: Scripta Mater., 2012, vol. 67, pp. 73–76.10.1016/j.scriptamat.2012.03.026 ↗
78. T.T. Sasaki, K. Oh-ishi, T. Ohkubo, and K. Hono: Mater. Sci. Eng. A, 2011, vol. 530, pp. 1–8.10.1016/j.msea.2010.05.010 ↗
79. S.P. Ringer and K. Hono: Mater. Charact., 2000, vol. 44, pp. 101–131.10.1016/S1044-5803(99)00051-0 ↗
80. O. El Sebaie, A.M. Samuel, F.H. Samuel, and H.W. Doty: Mater. Sci. Eng. A, 2008, vol. 480, pp. 342–355.10.1016/j.msea.2007.07.039 ↗
81. D.D. Risanti, M. Yin, P.E.J. Rivera Diazdel Castillo, and S. Vau der Zwang: Mater. Sci. Eng. A, 2009, vol. 523, pp. 99–111.10.1016/j.msea.2009.06.044 ↗