The Impact of Melt-Conditioned Twin-Roll Casting on the Downstream Processing of an AZ31 Magnesium Alloy
Source abstract
Abstract
Melt conditioning by intensive shear was used prior to twin-roll casting of AZ31 magnesium alloy strip to promote heterogeneous nucleation and to provide a refined and uniform microstructure without severe macrosegregation. The cast strip was then processed by homogenization, hot rolling, and annealing, and its downstream processing was compared with a similar cast strip produced without melt conditioning. Melt conditioning produced strip with accelerated kinetics of recrystallization during homogenization and improved performance in hot rolling and improved tensile properties. An average tensile elongation of ~28 pct was achieved, which is substantially higher than the ~9 pct obtained for the strip produced without melt conditioning which is consistent with reported values (~6 pct to 16 pct). The as-cast, homogenized, and hot-rolled microstructures of the strip were characterized. The kinetics of homogenization and hot-rolling process have been discussed in detail. © 2011 The Minerals, Metals & Materials Society and ASM International.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. I.J. Polmear: Light Alloys from Traditional Alloys to Nanocrystals, 4th ed., Elsevier/Butterworth-Heinemann, Oxford, UK, 2006, pp. 1–28.
3. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, and K. Higashi: Acta Mater., 2003, vol. 51, pp. 2055–65.10.1016/S1359-6454(03)00005-3 ↗
4. A. Galiyev, R. Kaibyshev, and G. Gottstein: Acta Mater., 2001, vol. 49, pp. 1199–1207.10.1016/S1359-6454(01)00020-9 ↗
5. S.E. Ion, F.J. Humphreys, and S.H. White: Acta Metall., 1982, vol. 30, pp. 1909–19.10.1016/0001-6160(82)90031-1 ↗
6. J.A. Del Valle, M.T. Pérez-Prado, and O.A. Ruano: Mater. Sci. Eng. A, 2003, vol. 355, pp. 68–78.10.1016/S0921-5093(03)00043-1 ↗
7. M.R. Barnett: Mater. Sci. Eng. A, 2007, vol. 464, pp. 8–16.10.1016/j.msea.2007.02.109 ↗
8. M. Mabuchi, T. Asahina, H. Iwasaki, and K. Higashi: Mater. Sci. Technol., 1997, vol. 13, pp. 825–31.10.1179/mst.1997.13.10.825 ↗
9. N. Stanford and D. Phelan: Acta Mater., 2010, vol. 58, pp. 3642–54.10.1016/j.actamat.2010.02.034 ↗
10. A. Yamashita, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2001, vol. 300, pp. 142–47.10.1016/S0921-5093(00)01660-9 ↗
11. K. Matsubara, Y. Miyahara, Z. Horita, and T.G. Langdon: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1735–44.10.1007/s11661-004-0082-z ↗
12. Q. Yang and A.K. Ghosh: Acta Mater., 2006, vol. 54, pp. 5147–58.10.1016/j.actamat.2006.06.045 ↗
13. J.A. Del Valle, M.T. Pérez-Prado, and O.A. Ruano: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 353–57.10.1016/j.msea.2005.08.097 ↗
14. N. Stanford and M.R. Barnett: J. Alloys Compd., 2008, vol. 466, pp. 182–88.10.1016/j.jallcom.2007.11.082 ↗
15. E. Essadiqi, M.T. Shehata, A. Javaid, C. Galvani, G. Shen, S. Yue, and R. Verma: JOM, 2009, vol. 61, pp. 25–28.10.1007/s11837-009-0117-4 ↗
16. S.R. Agnew and Ö. Duygulu: Int. J. Plast., 2005, vol. 21, pp. 1161–93.10.1016/j.ijplas.2004.05.018 ↗
17. M.R. Barnett, N. Stanford, P. Cizek, A. Beer, Z. Xuebin, and Z. Keshavarz: JOM, 2009, vol. 61, pp. 19–24.10.1007/s11837-009-0115-6 ↗
18. R.V. Allen, T.J. Johnson, W.E. Borbidge, and D. Liang: Magnesium Technology 2001, J.N. Hryn, ed., TMS, Warrendale, PA, 2001, pp. 75–80.
19. S.S. Park, W.-J. Park, C.H. Kim, B.S. You, and N.J. Kim: JOM, 2009, vol. 61, pp. 14–18.10.1007/s11837-009-0114-7 ↗
20. M. Ferry: Direct Strip Casting of Metals and Alloys, Woodhead Publishing Limited, Cambridge, UK, 2006, pp. 54–58, 101–50, 191.10.1533/9781845691660.101 ↗
21. D. Liang and C.B. Cowley: JOM, 2004, vol. 56, pp. 26–28.10.1007/s11837-004-0122-6 ↗
22. D. Liang, W. Borbidge, D.R. East, and R.V. Allen: US Patent No. 7,028,749 B2, 2006.
23. I. Bayandorian, Z. Bian, M. Xia, H. Zhang, G.M. Scamans, and Z. Fan: Magnesium Technology 2009, E.A. Nyberg, S.R. Agnew, N.R. Neelameggham, and M.O. Pekguleryuz, eds., TMS, Warrendale, PA, 2009, pp. 363–68.
24. Z. Fan: Int. Mater. Rev., 2002, vol. 47, pp. 49–85.10.1179/095066001225001076 ↗
25. Y. Mizutani, T. Tamura, and K. Miwa: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 205–10.10.1016/j.msea.2005.09.009 ↗
26. Z. Fan, Y. Wang, M. Xia, and S. Arumuganathar: Acta Mater., 2009, vol. 57, pp. 4891–4901.10.1016/j.actamat.2009.06.052 ↗
27. D.H. St John, M. Qian, M.A. Easton, P. Cao, and Z. Hildebrand: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1669–79.10.1007/s11661-005-0030-6 ↗
28. Y. Wang, X. Zeng, W. Ding, A.A. Luo, and A.K. Sachdev: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1358–66.10.1007/s11661-007-9215-5 ↗
29. Z. Fan and G. Liu: Acta Mater., 2005, vol. 53, pp. 4345–57.10.1016/j.actamat.2005.05.033 ↗
30. Y. Wang, G. Liu, and Z. Fan: Acta Mater., 2006, vol. 54, pp. 689–99.10.1016/j.actamat.2005.09.033 ↗
31. S. Ji and Z. Fan: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3511–20.10.1007/s11661-002-0338-4 ↗
32. Z. Fan, G. Liu, and Y. Wang: J. Mater. Sci., 2006, vol. 41, pp. 3631–44.10.1007/s10853-006-6248-x ↗
33. Z. Bian, I. Bayandorian, and Z. Fan: Mater. Sci. Technol., 2009, vol. 25, pp. 599–606.10.1179/174328408X326129 ↗
34. I. Bayandorian: Ph.D. Dissertation, Brunel University, UK, 2010.
35. M. Masoumi, F. Zarandi, and M.O. Pekguleryuz: Scripta Mater., 2010, vol. 62, pp. 823–26.10.1016/j.scriptamat.2010.02.003 ↗
36. H. Chen, S.B. Kang, H. Yu, H.W. Kim, and G. Min: Mater. Sci. Eng. A, 2008, vol. 492, pp. 317–26.10.1016/j.msea.2008.03.035 ↗
37. L. Jin, J. Dong, R. Wang, and L.M. Peng: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1970–74.10.1016/j.msea.2009.11.047 ↗
38. Y. Wang, S.B. Kang, and J. Cho: J. Mater. Proc. Technol., 2010, vol. 210, pp. 1270–75.10.1016/j.jmatprotec.2010.03.013 ↗
39. X. Huang, K. Suzuki, A. Watazu, I. Shigematsu, and N. Saito: J. Alloys Compd., 2009, vol. 470, pp. 263–68.10.1016/j.jallcom.2008.02.029 ↗
40. X. Gong, H. Li, S.B. Kang, J.H. Cho, and S. Li: Mater. Des., 2010, vol. 31, pp. 1581–87.10.1016/j.matdes.2009.09.021 ↗
41. J.M. Boileau, P.A. Friedman, D.Q. Houston, and S.G. Luckey: J. Mater. Eng. Perform., 2010, vol. 19, pp. 467–80.10.1007/s11665-010-9609-1 ↗
42. S.S. Park, G.T. Bae, D.H. Kang, In-Ho Jung, K.S. Shind, and N.J. Kimb: Scripta Mater., 2007, vol. 57, pp. 793–96.10.1016/j.scriptamat.2007.07.013 ↗
43. J.P. Weiler, T.J. Wood, R.J. Klassen, E. Maire, R. Berkmortel, and G. Wang: Mater. Sci. Eng. A, 2005, vol. 395, pp. 315–22.10.1016/j.msea.2004.12.042 ↗
44. S. Ji, Z. Fan, and M.J. Bevis: Mater. Sci. Eng. A, 2001, vol. 299, pp. 210–17.10.1016/S0921-5093(00)01373-3 ↗
45. M.M. Avedesian and H. Baker: ASM Specialty Handbook: Magnesium and Magnesium Alloys, ASM, Materials Park, OH, 1999, pp. 12–25, 165–72, 226–48, 258–63.
46. V. Laurent, P. Jarry, G. Regazzoni, and D. Apelian: J. Mater. Sci., 1992, vol. 27, pp. 4447–59.10.1007/BF00541578 ↗
47. S.F. Hassan and M. Gupta: J. Alloys Compd., 2007, vol. 429, pp. 176–18.10.1016/j.jallcom.2006.04.033 ↗
48. M. Paramsothy, S.F. Hassan, N. Srikanth, and M. Gupta: Mater. Sci. Eng. A, 2009, vol. 527, pp. 162–68.10.1016/j.msea.2009.07.054 ↗
49. U. Feurer and R. Wunderlin: Dtsch. Ges. Metallkd. Fachber., 1978, pp. 21–28.
50. D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, 2nd ed., Chapman & Hall, London, UK, 1992, pp. 71–75.10.1007/978-1-4899-3051-4 ↗
51. P. Heitjans and J. Karger: Diffusion in Condensed Matter: Methods Materials Models, 2nd ed., Birkhauser, Basel, Switzerland, 2005, pp. 337–63.10.1007/3-540-30970-5 ↗
52. A.M. Brown and M.F. Ashby: Acta Metall., 1980, vol. 28, pp. 1085–97.10.1016/0001-6160(80)90092-9 ↗
53. R.B. Figueiredo and T.G. Langdon: J. Mater. Sci., 2008, vol. 43, pp. 7366–71.10.1007/s10853-008-2846-0 ↗
54. H.-K. Kim and W.-J. Kim: J. Mater. Sci., 2007, vol. 42, pp. 6171–76.10.1007/s10853-006-1162-9 ↗
55. A.G. Beer and M.R. Barnett: Scripta Mater., 2009, vol. 61, pp. 1097–1100.10.1016/j.scriptamat.2009.09.002 ↗
56. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Amsterdam, the Netherlands, 2004, pp. 67–78, 439.10.1016/B978-008044164-1/50007-4 ↗
57. W. Woo, H. Cho, D.W. Brown, P.K. Liaw, and Z. Feng: Scripta Mater., 2006, vol. 4, pp. 1859–64.10.1016/j.scriptamat.2006.02.019 ↗
58. Z. Zuberova, L. Kunz, T.T. Lamark, Y. Estrin, and M. Janecek: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1934–40.10.1007/s11661-007-9109-6 ↗