Suppression of Boride Formation in Transient Liquid Phase Bonding of Pairings of Parent Superalloy Materials with Different Compositions and Grain Structures and Resulting Mechanical Properties
Source abstract
Abstract
Two Ni-based superalloys, columnar grained Alloy 247 and single-crystal PWA1483, are joined by transient liquid phase bonding using an amorphous brazing foil containing boron as a melting point depressant. At lower brazing temperatures, two different morphologies of borides develop in both base materials: plate-like and globular ones. Their ratio to each other is temperature dependent. With very high brazing temperatures, the deleterious boride formation in Alloy 247 can be totally avoided, probably because the three-phase-field moves to higher alloying element contents. For the superalloy PWA1483, the formation of borides cannot be completely avoided at high brazing temperatures as incipient melting occurs. During subsequent solidification of these areas, Chinese-script-like borides precipitate. The mechanical properties (tensile tests at room and elevated temperatures and short-term creep rupture tests at elevated temperatures) for brazed samples without boride precipitation are very promising. Tensile strengths and creep times to 1 pct strain are comparable, respectively, higher than the ones of the weaker parent material for all tested temperatures and creep conditions (from 90 to 100 pct rsp. 175 to 250 pct).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. R.C. Reed, The Superalloys: Fundamentals and Applications, 1st ed., Cambridge University Press, New York, 2006.10.1017/CBO9780511541285 ↗
2. T. M. Pollock, S. Tin: J. Propuls. Power, 2006, vol. 22, pp. 361-73.10.2514/1.18239 ↗
3. K. Nishimoto, K. Saida, D. Kim, Y. Nakao: ISIJ Int., 1995, vol. 35, pp. 1298-1306.10.2355/isijinternational.35.1298 ↗
4. R. Zhongci, W. Shuncai, Z. Yunrong: Scripta Mater., 1996, vol. 34, pp. 163-68.10.1016/1359-6462(95)00489-0 ↗
5. Y. Zheng, L. Zhao, K. Tangri: J. Mater. Sci., 1993, vol. 28, pp. 823-29.10.1007/BF01151264 ↗
6. A. Schnell: Dissertation, EPFL, Faculte sciences et techniques de l’ingenieur, 2004.
7. D. Kim, K. NIshimoto: Met. Mater. Int., 2002, vol. 8, pp. 403-10.10.1007/BF03186114 ↗
8. M.K. Dinkel, P. Heinz, F. Pyczak, A. Volek, M. Ott, E. Affeldt, A. Vossberg, M. Göken, and R.F. Singer: International Symposium on Superalloys, R.C. Reed, Seven Springs, 2008, pp. 211–20.10.7449/2008/Superalloys_2008_211_220 ↗
9. D. S. Duvall, W. A. Owczarski, D. F. Paulonis: Weld. J., 1974, vol. 53, no. 4, pp. 203–14.
10. R. Aluru, S. V. Chitti, N. Sofyan, R. D. Love, J. W. Fergus, W. F. Gale: Mater. Sci. Technol., 2008, vol. 24, no. 5, pp. 517-28.10.1179/174328408X293478 ↗
11. J. D. Liu, T. Jin, Z. H. Wang, X. F. Sun, H. R. Guan, Z. Q. Hu: Mater. Sci. Forum, 2007, vol. 546–549, pp. 1245–48.10.4028/www.scientific.net/MSF.546-549.1245 ↗
12. M. Pouranvari, A. Ekrami, A. H. Kokabi: J. Alloys Compd., 2008, vol. 461, pp. 341-47.10.1016/j.jallcom.2007.07.108 ↗
13. T. Li, Q. Y. Wang, A. Q. Wang, Z. X. Wen, Z. F. Yue: Key Eng. Mater., 2005, vol. 297–300, pp. 1489-94.10.4028/www.scientific.net/KEM.297-300.1489 ↗
14. X. Wu, R. S. Chandel, H. Li: J. Mater. Sci., 2001, vol. 36, pp. 1539-46.10.1023/A:1017513200502 ↗
15. M. Pouranvari, A. Ekrami, A. H. Kokabi: Mater. Sci. Eng. A, 2013, vol. 568, pp. 76-82.10.1016/j.msea.2013.01.029 ↗
16. M. Pouranvari, A. Ekrami, A. H. Kokabi : Mater. Des., 2013, vol. 50, pp. 694-701.10.1016/j.matdes.2013.03.030 ↗
17. M. Mosallaee, A. Ekrami, K. Ohsaha, K. Matsuura: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2389-2402.10.1007/s11661-008-9588-0 ↗
18. M. Pouranvari, A. Ekrami, A. H. Kokabi : Mater. Sci. Eng. A, 2008, vol. 490, pp. 229-34.10.1016/j.msea.2008.01.032 ↗
19. M. Pouranvari: World Appl. Sci. J., 2011, vol. 15, pp. 1507-11.
20. J. D. Liu, T. Jin, N. Zhao, Z. Wang, X. Sun, H. Guan, Z. Hu: Mater. Charact., 2008, vol. 59, pp. 68-73.10.1016/j.matchar.2006.10.018 ↗
21. J.D. Liu, T. Jin, N. Zhao, Z. Wang, X. Sun, H. Guan, and Z. Hu: International Symposium on Superalloys, R.C. Reed, ed., Seven Springs, 2008, pp. 295–99.10.7449/2008/Superalloys_2008_295_299 ↗
22. J. D. Liu, T. Jin, W. Lin, X. Sun, H. Guan, Z. Hu: J. Alloys Compd., 2008, vol. 457, pp. 185-90.10.1016/j.jallcom.2007.03.019 ↗
23. J. Cao, Y. F. Wang, X. G. Song, C. Li, J. C. Feng: Mater. Sci. Eng. A, 2014, vol. 590, pp. 1-6.10.1016/j.msea.2013.10.013 ↗
24. D. Shi, C. Dong, X. Yang, L. Zhang, J. Hou, Y. Liu: Mater. Sci. Eng. A, 2012, vol. 545, pp. 162-67.10.1016/j.msea.2012.02.099 ↗
25. X. Yang, C. Dong, D. Shi, L. Zhang: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7005-11.10.1016/j.msea.2011.05.085 ↗
26. R. Aluru, N.I. Sofyan, and W.F. Gale: International Symposium of Research Students, Chennai, India, 2004, pp. 1–9.
27. J. Liu, J. Cao, X. Lin, X. Song, J. Feng, Mater. Des., 2013, vol. 49, pp. 622-26.10.1016/j.matdes.2013.02.022 ↗
28. J.-D. Liu, T. Jin, N. Zhao, Z. Wang, X. Sun, H. Guan, Z. Hu: Sci. Technol. Weld., 2010, vol. 15, pp. 194-98.10.1179/136217109X12518083193513 ↗
29. W. F. Gale, Y. Guan: J. Mater. Sci., 1999, vol. 34, pp. 1061-71.10.1023/A:1004504330294 ↗
30. Y. Nakao, K. Nishimoto, K. Shinozaki, and C.Y. Kang: Adv. Join. Technol., 1990, pp. 129–44.10.1007/978-94-009-0433-0_11 ↗
31. R. K. Saha, T. I. Khan: J. Mater. Sci., 2007, vol. 42, pp. 9187-93.10.1007/s10853-007-1922-1 ↗
32. D. Kim, C. Kang, W. Lee: Met. Miner., 1999, vol. 5, pp. 477-84.
33. A. Ghoneim, O. A. Ojo: Phil. Mag., 2011, vol. 91, pp. 3649-66.10.1080/14786435.2011.580287 ↗
34. S. Steuer, R. F. Singer, Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2226-32.10.1007/s11661-012-1597-3 ↗
35. J. Liu, T. Jin, N. Zhao, Z. Wang, X. Sun, H. Guan, Z. Hu: Mater. Charact., 2011, vol. 62, pp. 545-53.10.1016/j.matchar.2011.03.012 ↗
36. O. A. Idowu, O. A. Ojo, M. C. Chaturvedi: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2787-96.10.1007/BF02586111 ↗
37. C. E. Campbell, W. J. Boettinger: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2835-3847.10.1007/BF02830355 ↗
38. S. Steuer, S. Piegert, M. Frommherz, R. F. Singer, A. Scholz: Adv. Mater. Res., 2011, vol. 278, pp. 454-59.10.4028/www.scientific.net/AMR.278.454 ↗
39. M. Dinkel: Dissertation, Universität Erlangen-Nürnberg, 2010.