journal article·2014-11

Induction Hardening vs Conventional Hardening of a Heat Treatable Steel

Stephanie Sackl, Harald Leitner, Michael Zuber, Helmut Clemens, Sophie Primig

Publisher page

Abstract

This study focuses on the comparison of mechanical and microstructural properties of induction and conventionally heat-treated steels in the as-quenched state. The investigated steel is a heat treatable 42CrMo4 steel. In order to characterize the mechanical properties, tensile tests and Vickers hardness tests are performed. The yield strength and hardness of the induction hardened condition turn out to be slightly lower compared to the conventionally hardened one. Light optical and scanning electron microscopy show no differences in the martensitic structure of the induction and conventionally hardened condition. However, electron back scatter diffraction investigations reveal a smaller block size within the conventionally hardened specimen. Carbon mappings by electron probe micro analysis show a homogenous carbon concentration in the conventionally hardened and a non-uniform distribution in the induction-hardened case. The segregation of the carbon exhibits line-type features in the induction hardened condition, lowering the total amount of carbon in the matrix. Therefore, the carbon content in the matrix of the conventionally hardened condition is slightly higher, which causes a smaller block size. The smaller block size is believed to be the reason for the higher hardness and yield strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Induction Heating and Inverter Technology · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. S.T. Ahn, D.S. Kim, and W.J. Nam: J. Mater. Process. Technol. 2005, vol. 160, pp. 54–5810.1016/j.jmatprotec.2004.03.019 ↗
2. J.B. Lee, N. Kang, J.T. Park, S.-T. Ahn, Y.-D.Park, I.-D.Choi, K.-R.Kim, and K.-M. Cho: Mater. Chem. Phys., 2011, vol. 129, pp. 365–70.10.1016/j.matchemphys.2011.04.026 ↗
3. D. Dengel: Haerterei Tech. Mitteilungen, 1984, vol. 39, pp. 182–93.
4. T. Furuhara, K. Kobayashi, and T. Maki: ISIJ Int., 2004, vol. 44, pp. 1937–44.10.2355/isijinternational.44.1937 ↗
5. S. Murphy and J.H. Woodhead: Metall. Trans., 1972, vol. 3, pp. 727–35.10.1007/BF02642758 ↗
6. C. Revilla, P. Uranga, B. Lòpez, and J.M. Rodriguez-Ibabe: AIST Steel Prop. Appl. Conf. Proc. Comb. with MS T’12, Mater. Sci. Technol. 2012, 2012, pp. 267–74.
7. K. Steineder and R. Schneider: HTM J. Heat Treat. Mater., 2013, vol. 68, pp. 77–84.10.3139/105.110179 ↗
8. H. Leitner, D. Caliskanoglu, and H. Clemens: BHM Berg- Huettenmaenn. Monatsh., 2004, vol. 149, pp. 172–75.
9. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
10. S. Morito, H. Yoshida, T. Maki, and X. Huang: Mater. Sci. Eng., A, 2006, vols. 237–40, pp. 237–40.10.1016/j.msea.2005.12.048 ↗
11. E. Schacht and J. Richter: Prakt. Metallogr., 1998, vol. 35, pp. 384—95.10.1515/pm-1998-350706 ↗
12. H. Matsuda, R. Mizuno, Y. Funakawa, K. Seto, S. Matsuoka, and Y. Tanaka: J. Alloys Compd., 2013, vol. 577, pp. S661-67.10.1016/j.jallcom.2012.04.108 ↗
13. G. Speichand and W. Leslie: Metall. Trans. A, 1972, vol. 3, pp. 1043–53.10.1007/BF02642436 ↗
14. J. Wu, P.J. Wray, C.I. Garcia, M. Hua, and A.J. Deardo: ISIJ Int., 2005, vol. 45, pp. 254–62.10.2355/isijinternational.45.254 ↗
15. F.J. Humphreys: J. Mater. Sci., 2001, vol. 6, pp. 3833–54.10.1023/A:1017973432592 ↗
16. S. Morito, H. Saito, T. Ogawa, T. Furuhara, and T. Maki: ISIJ Int., 2005, vol. 45, pp. 91–94.10.2355/isijinternational.45.91 ↗
17. G. Miyamoto, N. Iwata, N. Takayama, and T. Furuhara: J. Alloys Compd., 2013, vol. 577, pp. S528–32.10.1016/j.jallcom.2011.12.111 ↗
18. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
19. Y. Tomita and K. Okabayashi: Metall. Trans. A, 1986, vol. 17, pp. 1203–09.10.1007/BF02665319 ↗
20. T. Swarrand and G. Krauss: Metall. Trans. A, 1976, vol. 7, pp. 41–48.10.1007/BF02644037 ↗
21. C. Zhang, Q. Wang, J. Ren, R. Li, M. Wang, F. Zhang, and K. Sun: Mater. Sci. Eng., A, 2012, vol. 534, pp. 339–46.10.1016/j.msea.2011.11.078 ↗
22. F. Foroozmehr, A. Najafizadeh, and A. Shafyei: Mater. Sci. Eng., A, 2011, vol. 528, pp. 5754–58.10.1016/j.msea.2011.04.055 ↗
23. K.C. Smith, J.P. Wise, and G. Krauss: Prog. Heat Treat. Surf. Eng., 2000, pp. 379–86.
24. K.D. Clarke, C.J. Van Tyne, C.J. Vigil, and R.E. Hackenberg: J. Mater. Eng. Perform., 2011, vol. 20, pp. 161–68.10.1007/s11665-010-9825-8 ↗