Insights from the Lattice-Strain Evolution on Deformation Mechanisms in Metallic-Glass-Matrix Composites
Source abstract
Abstract
In situ high-energy synchrotron X-ray diffraction experiments and micromechanics-based finite element simulations have been conducted to examine the lattice-strain evolution in metallic-glass-matrix composites (MGMCs) with dendritic crystalline phases dispersed in the metallic-glass matrix. Significant plastic deformation can be observed prior to failure from the macroscopic stress–strain curves in these MGMCs. The entire lattice-strain evolution curves can be divided into elastic–elastic (denoting deformation behavior of matrix and inclusion, respectively), elastic–plastic, and plastic–plastic stages. Characteristics of these three stages are governed by the constitutive laws of the two phases (modeled by free-volume theory and crystal plasticity) and geometric information (crystalline phase morphology and distribution). The load-partitioning mechanisms have been revealed among various crystalline orientations and between the two phases, as determined by slip strain fields in crystalline phase and by strain localizations in matrix. Implications on ductility enhancement of MGMCs are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Cultural Heritage Materials Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. A.L. Greer: Science, 1995, vol. 267, pp. 1947-53.10.1126/science.267.5206.1947 ↗
2. A. Inoue: Acta Mater., 2000, vol. 48, pp. 279-306.10.1016/S1359-6454(99)00300-6 ↗
3. M.W. Chen, A. Inoue, W. Zhang and T. Sakurai: Phys. Rev. Lett., 2006, vol. 96, pp. 245502.10.1103/PhysRevLett.96.245502 ↗
4. H.L. Jia, C.I. Muntele, L. Huang, X. Li, G. Li, T. Zhang, W. He and P.K. Liaw: Intermetallics, 2013, vol. 41, pp. 35-43.10.1016/j.intermet.2013.04.010 ↗
5. W. Kai, Y.H. Wu, W.S. Chen, L.W. Tsay, H.L. Jia and P.K. Liaw: Corros. Sci., 2013, vol. 66, pp. 26-32.10.1016/j.corsci.2012.08.046 ↗
6. Q.K. Jiang, P. Liu, Y. Ma, Q.P. Cao, X.D. Wang, D.X. Zhang, X.D. Han, Z. Zhang and J.Z. Jiang: Sci. Rep., 2012, vol. 2, pp. 852.10.1038/srep00852 ↗
7. H.L. Jia, F.X. Liu, Z.N. An, W.D. Li, G.Y. Wang, J.P. Chu, J.S.C. Jang, Y.F. Gao and P.K. Liaw: Thin Solid Films, 2014, vol. 561, pp. 2-27.10.1016/j.tsf.2013.12.024 ↗
8. J.W. Qiao, Y. Zhang, H.L. Jia, H.J. Yang, P.K. Liaw and B.S. Xu: Appl. Phys. Lett., 2012, vol. 100, pp. 121902.10.1063/1.3696026 ↗
9. J.W. Qiao, A.C. Sun, E.W. Huang, Y. Zhang, P.K. Liaw and C.P. Chuang: Acta Mater., 2011, vol. 59, pp. 4126-37.10.1016/j.actamat.2011.03.036 ↗
10. D.C. Hofmann, J.Y. Suh, A. Wiest, G. Duan, M.L. Lind and M.D. Demetriou: Nature, 2008, vol. 451, pp. 1085-89.10.1038/nature06598 ↗
11. F. Szuecs, C.P. Kim and W.L. Johnson: Acta Mater., 2001, vol. 49, pp. 1507-13.10.1016/S1359-6454(01)00068-4 ↗
12. Z.P. Chen, J.E. Gao, Y. Wu, H. Wang, X.J. Liu and Z.P. Lu: Sci. Rep., 2013, vol. 3, pp. 3353.10.1038/srep03353 ↗
13. J.W. Qiao, H.L. Jia, C.P. Chuang, E.W. Huang, G.Y. Wang, P.K. Liaw, Y. Ren and Y. Zhang: Scripta Mater., 2010, vol. 63, pp. 871-74.10.1016/j.scriptamat.2010.06.039 ↗
14. J.W. Qiao, S.G. Ma, G.Y. Wang, F. Jiang, P.K. Liaw and Y. Zhang: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2530-34.10.1007/s11661-011-0788-7 ↗
15. J.W. Qiao, Y. Zhang, P.K. Liaw and G.L. Chen: Scripta Mater., 2009, vol. 61, pp. 1087-90.10.1016/j.scriptamat.2009.08.044 ↗
16. J.W. Qiao, T. Zhang, F.Q. Yang, P.K. Liaw, S. Pauly and B.S. Xu: Sci. Rep., 2013, vol. 3, pp. 2816.10.1038/srep02816 ↗
17. C.C. Hays, C.P. Kim and W.L. Johnson: Phys. Rev. Lett., 2000, vol. 84, pp. 2901-04.10.1103/PhysRevLett.84.2901 ↗
18. J.W. Qiao, S. Wang, Y. Zhang, P.K. Liaw and G.L. Chen: Appl. Phys. Lett., 2009, vol. 94, pp. 151905.10.1063/1.3118587 ↗
19. D.K. Balch, E. Üstündag and D.C. Dunand: J. Non-Cryst. Solids, 2003, vol. 317, pp. 176-80.10.1016/S0022-3093(02)02008-2 ↗
20. D.K. Balch, E. Üstündag and D.C. Dunand: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1787-97.10.1007/s11661-003-0145-6 ↗
21. B. Clausen, S.Y. Lee, E. Üstündag, C.N.P. Kim, D.W. Brown and M.A.M. Bourke: Mater. Sci. Forum, 2002, vol. 404-407, pp. 553-60.10.4028/www.scientific.net/MSF.404-407.553 ↗
22. B. Clausen, S. Lee, E. Üstündag, C. Kim, D. Brown and M. Bourke: Scripta Mater., 2006, vol. 54, pp. 343-47.10.1016/j.scriptamat.2005.10.009 ↗
23. R.T. Ott, F. Sansoz, J.F. Molinari, J. Almer, K.T. Ramesh and T.C. Hufnagel: Acta Mater., 2005, vol. 53, pp. 1883-93.10.1016/j.actamat.2004.12.037 ↗
24. L.B. McCusker, R.B. Von Dreele, D.E. Cox, D. LoueÈrd and P. Scardie: J. Appl. Cryst., 1999, vol. 32, pp. 36-50.10.1107/S0021889898009856 ↗
25. L.L. Zheng, Y.F. Gao, S.Y. Lee, R.I. Barabash, J.H. Lee and P.K. Liaw: J. Mech. Phys. Solids, 2011, vol. 59, pp. 2307-22.10.1016/j.jmps.2011.08.001 ↗
26. L.L. Zheng, Y.F. Gao, Y.D. Wang, A.D. Stoica, K. An and X.L. Wang: Scripta Mater., 2013, vol. 68, pp. 265-68.10.1016/j.scriptamat.2012.10.033 ↗
27. A.P. Hammersley, S.O. Svensson, M. Hanfland, A.N. Fitch and D. Hausermann: High Pressure Res., 1996, vol. 14, pp. a235-48.10.1080/08957959608201408 ↗
28. Y.G. Huang: “A User-Material Subroutine Incorporating Single Crystal Plasticity in the ABAQUS Finite Element Program”, Mechanics Report 179, Division of Engineering and Applied Science, Harvard University, 1991.
29. Y.F. Gao: Modell. Simul. Mater. Sci. Eng., 2006, vol. 14, pp. 1329-45.10.1088/0965-0393/14/8/004 ↗
30. F. Spaepen: Acta Metall., 1977, vol. 25, pp. 407-15.10.1016/0001-6160(77)90232-2 ↗
31. Z.N. An, W.D. Li, F.X. Liu, P.K. Liaw and Y.F. Gao: Metall. Mater. Trans. A, 2012, vol. 43, pp. 2729-41.10.1007/s11661-011-0992-5 ↗
32. M.C. Liu, J.C. Huang, K.W. Chen, J.F. Lin, W.D. Li, Y.F. Gao and T.G. Nieh: Scripta Mater., 2012, vol. 66, pp. 817-20.10.1016/j.scriptamat.2012.02.025 ↗
33. C.L. Ma and A. Inoue: Mater. Trans., JIM, 2002, vol. 7, pp. 1737-40.10.2320/matertrans.43.1737 ↗
34. C.L. Ma and A. Inoue: Mater. Trans., JIM, 2003, vol. 1, pp. 188-96.10.2320/matertrans.44.188 ↗
35. R.T. Ott, C. Fan, J. Li and T.C. Hufnagel: J. Non-Cryst. Solids, 2003, vol. 317, pp. 158-63.10.1016/S0022-3093(02)01996-8 ↗
36. R.T. Ott, F. Sansoz, T. Jiao, D. Warner, C. Fan, J.F. Molinari, K.T. Ramesh and T.C. Hufnagel: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3251-58.10.1007/BF02586160 ↗
37. D. Peirce, R.J. Asaro and A. Needleman: Acta Metall., 1982, vol. 30, pp. 1087-119.10.1016/0001-6160(82)90005-0 ↗
38. A.F. Bower and E. Wininger: J. Mech. Phys. Solids, 2004, vol. 52, pp. 1289-317.10.1016/j.jmps.2003.11.004 ↗
39. S.L. Wong and P.R. Dawson: Acta Mater., 2010, vol. 58, pp. 1658-78.10.1016/j.actamat.2009.11.009 ↗
40. J.D. Eshelby: P. Roy. Soc. Lond. A, 1957, vol. 241, pp. 376-79.10.1098/rspa.1957.0133 ↗
41. S.-Y. Lee, B. Clausen, E. Üstündag, H. Choi-Yim, C.C. Aydiner and M.A.M. Bourke: Mater. Sci. Eng., A, 2005, vol. 399, pp. 128-33.10.1016/j.msea.2005.02.032 ↗
42. B. Clausen, S.Y. Lee, E. Üstündag, C.C. Aydiner, R.D. Conner and M.A.M. Bourke: Scripta Mater., 2003, vol. 49, pp. 123-28.10.1016/S1359-6462(03)00237-9 ↗
43. D. Dragoi, E. Üstündag, B. Clausen and M.A.M. Bourke: Scripta Mater., 2001, vol. 45, pp. 245-52.10.1016/S1359-6462(01)01031-4 ↗
44. Y.C. Kim, E. Fleury, J.-C. Lee and D.H. Kim: J. Mater. Res., 2011, vol. 20, pp. 2474-79.10.1557/jmr.2005.0315 ↗
45. B. Sarac and J. Schroers: Nat. Commun., 2013, vol. 4, pp. 2158.10.1038/ncomms3158 ↗
46. Z.Q. Liu, G. Liu, R.T. Qu, Z.F. Zhang, S.J. Wu and T. Zhang: Sci. Rep., 2014, vol. 4, pp. 4167.10.1038/srep04167 ↗
47. S. Pauly, G. Liu, G. Wang, U. Kühn, N. Mattern and J. Eckert: Acta Mater., 2009, vol. 57, pp. 5445-53.10.1016/j.actamat.2009.07.042 ↗