journal article·2015-09

Evolution of Minor Phases in a 9PctCr Steel: Effect of Tempering Temperature and Relation with Hydrogen Trapping

Carolina Hurtado-Noreña, Claudio Ariel Danón, María Inés Luppo, Pablo Bruzzoni

Publisher page

Abstract

The evolution of minor phases in ASTM A335 P91 steel has been studied on specimens submitted to different thermal treatments including a tempering step. Particular emphasis has been put on the tempering temperature range 573 K to 873 K (300 °C to 600 °C), which has not been yet intensively studied. The techniques used in this investigation were X-ray diffraction with synchrotron light, scanning electron microscopy with field emission gun and transmission electron microscopy. In the low tempering temperature range [573 K to 673 K (300 °C to 400 °C)], retained austenite, Fe3C and MX precipitates are observed. In the high tempering temperature range [773 K to 1053 K (500 °C to 780 °C)], M23C6-type carbides, MX-type carbonitrides and M2X precipitates are observed. The effect of the microstructure on hydrogen trapping is analyzed. The distorted matrix around the M2X and MX particles provides the most important trap sites in the P91 steel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. R.L. Klueh and D.R. Harries: High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, ASTM, Bridgeport, New Jersey, NJ, 2001, pp. 28-42.10.1520/MONO3-EB ↗
2. M. Vijayalakshmi and B. Raj: Phase Evolution Diagrams, a new approach to mean metal temperature of ferritic components, Universities Press, Hyderabad, India, 2006, pp. 25-91.
3. W.B. Jones, C.R. Hills and D.H. Polonis: Metall. Trans. A, 1991, vol. 22A, pp. 1049–1058.10.1007/BF02661098 ↗
4. N. Zavaleta-Gutiérrez, M.I. Luppo and C.A. Danón: ISIJ International, 2007, vol. 47, pp. 1178-1187.10.2355/isijinternational.47.1178 ↗
5. J.M. Vitek and R.L. Klueh: Metall. Trans. A, 1983, vol. 14A, pp. 1047-1055.10.1007/BF02670443 ↗
6. M. Taneike, K. Sawada and F. Abe, Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1255-1262.10.1007/s11661-004-0299-x ↗
7. K. Kaneko, S. Matsumura, A. Sadakata, K. Fujita, W.-J. Moon, S. Ozaki, N. Nishimura and Y. Tomokiyo: Mater. Sci. Eng., A, 2004, vol. 374, pp. 82-89.10.1016/j.msea.2003.12.065 ↗
8. C. Hurtado Noreña and P. Bruzzoni: Mater. Sci. Eng., A, 2010, vol. 527, pp. 410-416.10.1016/j.msea.2009.08.025 ↗
9. Y.Z. Shen, S.H. Kim, H.D. Cho, C.H. Han and W.S. Ryu: Nucl. Eng. Des., 2009, vol. 239, pp. 648–654.10.1016/j.nucengdes.2008.12.018 ↗
10. A. Kabadwal, M. Tamura, K. Shinozuka and H. Esaka: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 364-379.10.1007/s11661-009-0094-9 ↗
11. A. Zielinska-Lipiec, A. Czyrska-Filemonowicz, P.J. Ennis and O. Wachter: J. Mater. Process. Technol., 1997, vol. 64, pp. 397-405.10.1016/S0924-0136(96)02591-5 ↗
12. F.B. Pickering and A.D. Vassiliou: Met. Technol., 1980, vol. 7 (1), pp. 409–13.10.1179/030716980803286865 ↗
13. Y. Sakamoto and U. Hanada: Mater. Trans., 1977, vol. 18, pp. 466–70.10.2320/matertrans1960.18.466 ↗
14. M. Tamura, M.M. Nowell, K. Shinozuka, and H. Esaka: Mater. Trans. JIM, 2006, vol. 47, pp. 1332–40.10.2320/matertrans.47.1332 ↗
15. C. Hurtado-Noreña, Ph.D. Thesis in Science and Technology, Materials Program. Sabato Institute (CNEA – Gral. San Martín National University), República Argentina, 2012.
16. N. Boes and H. Züchner: J. Less-Common Met., 1976, vol. 49, pp. 223-240.10.1016/0022-5088(76)90037-0 ↗
17. P. Villars and L.D. Clavert: Pearson´s Handbook of Crystallographic Data for Intermetallic Phases, 2 nd ed., ASM International, The Materials Information Society, Ohio, OH, 1991.
18. R.W.H. Honeycombe and H.K.D.K. Bhadeshia: Steels: Microstructure and Properties, 2nd ed., Edward Arnold, London, 1995.
19. A. Zielinska-Lipiec, A. Czyrska-Filemonowicz, P.J. Ennis and O. Wachter: J. Mat. Proc. Tech., 1997, vol. 64, pp. 397-405.10.1016/S0924-0136(96)02591-5 ↗
20. R.L. Klueh: Elevated Temperature Ferritic and Martensitic Steels and Their Application to Future Nuclear Reactors, Oak Ridge National Laboratory Report ORNL/TM-2004/176, 2004.10.2172/885938 ↗
21. F.B. Pickering: in Physikalisch-Technischer Teil, G. Möllenstedt et al., eds., Springer Verlag, Berlin, 1960, pp. 668–70.10.1007/978-3-642-50195-1_194 ↗
22. G.E. Dieter: Mechanical Metallurgy, 3rd ed. Mc Graw-Hill, United States of America, 1986.
23. A. McNabb and P.K. Foster: Trans. Metall. Soc. AIME, 1963, vol. 227, pp. 618–27.
24. A. San-Martin and F.D. Manchester: Bull. Alloy Phase Diagrams, 1990, vol. 11, pp. 173-184.10.1007/BF02841704 ↗
25. D. PérezEscobar, T. Depover, L. Duprez, K. Verbeken, and M. Verhaege: Acta Mater., 2012, vol. 60, pp. 2593–2605.10.1016/j.actamat.2012.01.026 ↗
26. C. Gesnouin, A. Hazarabedian, P. Bruzzoni, J. Ovejero-García, P. Bilmes and C. Llorente: Corros. Sci., 2004, vol. 46, pp. 1633-1647.10.1016/j.corsci.2003.10.006 ↗
27. J.W. Martin, R.D. Doherty, and B. Cantor: Stability of Microstructure in Metallic systems, 2nd ed., Cambridge University Press, Cambridge, 1977.
28. H. Morikawa, H. Komatsu and M. Tanino: J. Electron Microsc., 1973, vol. 22(1), pp. 99-101.
29. R.G. Baker and J. Nutting: Precipitation Processes in Steels, ISI Special Report, Iron and Steel Institute, London, vol. 64, 1959.
30. H.M. Lee and S.M. Allen: Metall. Trans., 1991, vol. 22A, pp. 2877-2888.10.1007/BF02650249 ↗
31. F.G. Wei and K. Tsuzaki: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 331-353.10.1007/s11661-006-0004-3 ↗
32. F.G. Wei, T. Hara, and K. Tsuzaki: in Effect of Hydrogen on Materials, B. Somerday, P. Sofronis, and R. Jones, eds., ASM International, Materials Park, 2009.
33. P. Bruzzoni, G. Domizzi, M.I. Luppo, D. Zalcman, and J. Ovejero-García: in Hydrogen Effects in Materials, A.W. Thompson and N.R. Moody, eds., TMS, Pennsylvania, Warrendale, 1996, pp. 1001–09.