Accommodation of Plastic Deformation by Ultrasound-Induced Grain Rotation
Source abstract
Abstract
Electron backscatter diffraction was used to investigate the softening effect in low-carbon steel [Fe-0.051C-0.002Si-0.224Mn-0.045Al (wt pct)] during tensile deformation with in situ ultrasonic treatment. A bimodal grain size distribution is observed with relatively small equiaxed grains with an average diameter of 10 μm at the grain boundaries of large elongated grains. The formation of these relatively small equiaxed grains is interpreted in terms of dynamic recrystallization by lattice and sub-grain rotation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High-Velocity Impact and Material Behavior · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. E.S. Statnikov: International Institute of Welding (IIW); IIW Doc XIII-1667-97, 1997
2. Y. Kudryavtsev, J. Kleiman, L. Lobanov, V. Knysh, G. Prokopenko: International Institute of Welding (IIW); IIW - Doc XIII-2010-04, 2004
3. F. Blaha, B. Langenecker, Naturwissenschaften 42, 556 (1955)10.1007/BF00623773 ↗
4. B. Langenecker, Proc. Am. Soc. Test Mat. 62, 602 (1962)
5. B. Langenecker, IEEE TransSonics Ultrason. SU–13, 8 (1966)10.1109/T-SU.1966.29367 ↗
6. G.F. Nevill, F.R. Brotzen, Proc. Am. Soc. Test Mat. 57, 751 (1957)
7. G.S. Baker, S.H. Carpenter, Rev. Sci. Instrum. 36, 29 (1965)10.1063/1.1719317 ↗
8. R. Pohlman, F. Leehfeldt, Ultrasonics 4, 178 (1966)10.1016/0041-624X(66)90244-7 ↗
9. O.I. Volchok, I.A. Gindin, L.A. Kornienko, I.M. Neklyudov, A.A. Nikolaenko, Strength Mater. 14, 565–568 (1982)10.1007/BF01151171 ↗
10. M.D. Tyavlovskii, Met. Sci. Heat Treat. 23, 412–414 (1981)10.1007/BF00699544 ↗
11. A.E. Eaves, A.W. Smith, W.J. Waterhouse, D.H. Sansome, Ultrasonics 13(4), 162–170 (1975)10.1016/0041-624X(75)90085-2 ↗
12. M. Tanibayashi, Phys. Status Solidi (A) Appl. Res. 128(1), 83–94 (1991)10.1002/pssa.2211280109 ↗
13. G.A. Malygin, Phys. Solid State 42, 72 (2000a)10.1134/1.1131170 ↗
14. G.A. Malygin, Phys. Solid State 42, 492 (2000b)10.1134/1.1131237 ↗
15. H.O.K. Kirchner, W.K. Kromp, F.B. Prinz, P. Trimmel, Mater. Sci. Eng. 68(2), 197–206 (1985)10.1016/0025-5416(85)90409-4 ↗
16. O. Izumi, K. Oyama, Y. Suzuki, Trans. Jpn. Inst. Met. 7(3), 158–162 (1966a)10.2320/matertrans1960.7.158 ↗
17. Y. Daud, M. Lucas, Z. Huang, J. Mater. Process. Technol. 186(1–3), 179–190 (2007)10.1016/j.jmatprotec.2006.12.032 ↗
18. O. Izumi, K. Oyama, Y. Suzuki, Trans. Jpn. Inst. Met. 7(3), 162–167 (1966b)10.2320/matertrans1960.7.162 ↗
19. T. Endo, K. Suzuki, M. Ishikawa, Trans. Jpn. Inst. Met. 20(12), 706–712 (1979)10.2320/matertrans1960.20.706 ↗
20. Z. Huang, M. Lucas, M.J. Adams, Ultrasonics 40(1–8), 43–48 (2002)10.1016/S0041-624X(02)00245-7 ↗
21. Y. Daud, M. Lucas, Z. Huang, Ultrasonics 44(SUPPL), e511–e515 (2006)10.1016/j.ultras.2006.05.116 ↗
22. R.K. Dutta, R.H. Petrov, R. Delhez, M.J.M. Hermans, I.M. Richardson, A.J. Böttger, Acta Mater. 61(5), 1592–1602 (2013)10.1016/j.actamat.2012.11.036 ↗
23. ASTM E8/E8M - 09: Annual Book of ASTM Standards 2009, 2009
24. ASM Handbook: Metallography and Microstructures, vol. 9. ASM International, 2004
25. S. Zaefferer, Ultramicroscopy 107(2–3), 254–266 (2007)10.1016/j.ultramic.2006.08.007 ↗
26. F.J. Humphreys, J. Mater. Sci. 36(16), 3833–3854 (2001)10.1023/A:1017973432592 ↗
27. M. Jedrychowski, J. Tarasiuk, B. Bacroix, S. Wronski, J. Appl. Crystallogr. 46(2), 483–492 (2013)10.1107/S0021889812052016 ↗
28. M. Kamaya, A.J. Wilkinson, J.M. Titchmarsh, Acta Mater. 54(2), 539–548 (2006)10.1016/j.actamat.2005.08.046 ↗
29. M. Kamaya, Mater. Charact. 66, 56–67 (2012)10.1016/j.matchar.2012.02.001 ↗
30. B. Derby,Acta Metall. et Mater. 39(5), 955–962 (1991)10.1016/0956-7151(91)90295-C ↗
31. M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Pérez-Prado M, T. McNelley, Acta Mater. 51(5), 1307–1325 (2003)10.1016/S1359-6454(02)00526-8 ↗
32. Y. Zou, W. Qin, E. Irissou, J.G. Legoux, S. Yue, J.A. Szpunar, Scripta Mater. 61(9), 899–902 (2009)10.1016/j.scriptamat.2009.07.020 ↗
33. J.C. Tan, M.J. Tan, Mater. Sci. Eng. A 339(1–2), 124–132 (2003)10.1016/S0921-5093(02)00096-5 ↗
34. Y. Xu, H.J. Yang, M.A. Meyers, Scripta Mater. 58(8), 691–694 (2008)10.1016/j.scriptamat.2007.12.006 ↗
35. Q. Li, Y.B. Xu, Z.H. Lai, L.T. Shen, Y.L. Bai, Mater. Sci. Eng. A 276(1–2), 250–256 (2000)10.1016/S0921-5093(99)00127-6 ↗
36. M.A. Meyers, H.R. Pak, Acta Metall. 34(12), 2493–2499 (1986)10.1016/0001-6160(86)90152-5 ↗
37. M.A. Meyers, G. Subhash, B.K. Kad, L. Prasad, Mech. Mater. 17(2–3), 175–193 (1994)10.1016/0167-6636(94)90058-2 ↗
38. U. Andrade, M.A. Meyers, K.S. Vecchio, A.H. Chokshi, Acta Metall. Et Mater. 42(9), 3183–3195 (1994)10.1016/0956-7151(94)90417-0 ↗
39. V.F. Nesterenko, M.A. Meyers, J.C. LaSalvia, M.P. Bondar, Y.J. Chen, Y.L. Lukyanov, Mater. Sci. Eng. A 229(1–2), 23–41 (1997)10.1016/S0921-5093(96)10847-9 ↗
40. D.A. Hughes, R.A. Lebensohn, H.R. Wenk, A. Kumar, Proc. R. Soc. Lond. A 456, 921–953 (2000)10.1098/rspa.2000.0543 ↗
41. D. Kuhlmann-Wilsdorf, N. Hansen, Scripta Metall. et Mater. 25(7), 1557–1562 (1991)10.1016/0956-716X(91)90451-6 ↗
42. B. Bay, N. Hansen, D.A. Hughes, D. Kuhlmann-Wilsdorf, Acta Metall. et Mater. 40(2), 205–219 (1992)10.1016/0956-7151(92)90296-Q ↗
43. Q. Liu, N. Hansen, Scripta Metall. et Mater. 32(8), 1289–1295 (1995)10.1016/0956-716X(94)00019-E ↗
44. D.A. Hughes, D.C. Chrzan, Q. Liu, N. Hansen, Phys. Rev. Lett. 81(21), 4664–4667 (1998)10.1103/PhysRevLett.81.4664 ↗
45. M.T. Pérez-Prado, G. González-Doncel, O.A. Ruano, T.R. McNelley, Acta Mater. 49(12), 2259–2268 (2001)10.1016/S1359-6454(01)00128-8 ↗
46. H.S. Kim, D.H. Joo, M.H. Kim, S.K. Hwang, S.I. Kwun, S.W. Chae, Mater. Sci. Technol. 19(3), 403–405 (2003)10.1179/026708303225002073 ↗
47. F.J. Humphreys, M. Hatherly, Recrystallization and Related Annealing Phenomena (Pergamon Press, Oxford, 1995)
48. P.B. Prangnell, J.S. Hayes, J.R. Bowen, P.J. Apps, P.S. Bate, Acta Mater. 52(11), 3193–3206 (2004)10.1016/j.actamat.2004.03.019 ↗
49. Y. Liu, S. Suslov, Q. Han, L. Hua, C. Xu, Metall. Mater. Trans. A 44A, 3232–3244 (2013)10.1007/s11661-013-1651-9 ↗
50. R.B. Lindsay, Mechanical Radiation (McGraw-Hill, New York, 1960)
51. K.H. Westmacott, B. Langenecker, Phys. Rev. Lett. 14(7), 221–222 (1965)10.1103/PhysRevLett.14.221 ↗
52. R. Dawson, D.G. Moffat, J. Eng. Mater. Technol. Trans. ASME 102(1), 169–176 (1980)10.1115/1.3224793 ↗
53. D. Rao, D. Wang, L. Chen, C. Ni, Int. J. Fatigue 29(1), 192–196 (2007)10.1016/j.ijfatigue.2006.02.047 ↗
54. S. Kwofie, Mater. Sci. Eng. A 516(1–2), 154–161 (2009)10.1016/j.msea.2009.03.014 ↗
55. J.S. Wang, C.C. Hsieh, C.M. Lin, C.W. Kuo, W. Wu, Metall. Mater. Trans. A 44A, 806–818 (2013)10.1007/s11661-012-1450-8 ↗
56. A. Mutrux, B. Berisha, P. Hora, J. Mater. Process. Technol. 211(8), 1448–1456 (2011)10.1016/j.jmatprotec.2011.03.019 ↗
57. H.F. Chai, C. Laird, Mater. Sci. Eng. 93(C), 159–174 (1987)10.1016/0025-5416(87)90421-6 ↗
58. Y. Liu, S. Suslov, Q. Han, C. Xu, L. Hua, Mater. Lett. 67(1), 52–55 (2012)10.1016/j.matlet.2011.08.086 ↗
59. B. Derby, Scripta Metall. et Mater. 27(11), 1581–1585 (1992)10.1016/0956-716X(92)90148-8 ↗
60. S.F. Medina, C.A. Hernandez, Acta Mater. 44(1), 137–148 (1996)10.1016/1359-6454(95)00151-0 ↗
61. C.A. Hernandez, S.F. Medina, J. Ruiz, Acta Mater. 44(1), 155–163 (1996)10.1016/1359-6454(95)00153-4 ↗
62. F. Montheillet, O. Lurdos, G. Damamme, Acta Mater. 57(5), 1602–1612 (2009)10.1016/j.actamat.2008.11.044 ↗