Microstructure Evolution and Tensile Properties of a Selectively Laser Melted CoNi-Base Superalloy
Source abstract
Abstract
A high (gamma prime ) volume fraction CoNi-base superalloy with roughly equal amounts of cobalt and nickel was successfully processed through selective laser melting. The as-printed alloy has a fine cellular structure with segregation of tantalum and significant built-in misorientation within the columnar grain structure. The microstructure evolution after various heat treatments was studied by electron backscatter diffraction and scanning electron microscopy. Super-solvus solution heat treatment promotes complete recrystallization of the microstructure which degrades elevated temperature tensile ductility. Post-processing involving sub-solvus hot isostatic pressing, solution heat treatment, and aging produces a bimodal (gamma prime ) distribution while retaining a grain structure similar to the as-printed alloy. The evolution of the precipitate structure was strongly influenced by the cellular structure of the as-printed material. Peak hardness was reached after 2 hours of aging at 950 (circ hbox {C}). Increasing the carbon content of the alloy promotes the formation of additional carbides on the grain boundaries. Room temperature and intermediate temperature (760 (circ hbox {C})) tensile testing measured parallel and perpendicular to the build direction revealed that the new heat treatments and carbon additions to the alloy resulted in improved yield strength, ultimate tensile strength, and ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. W. Frazier: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1917–28.10.1007/s11665-014-0958-z ↗
2. Y. Zhang, L. Wu, X. Guo, S. Kane, Y. Deng, Y. Jung, J. Lee, and J. Zhang: J. Mater. Eng. Perform., 2018, vol. 27, pp. 1–13.10.1007/s11665-017-2747-y ↗
3. T.M. Pollock, A. Clarke, and S. Babu: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 6000–19.10.1007/s11661-020-06009-3 ↗
4. B. Song, X. Zhao, S. Li, C. Han, Q. Wei, S. Wen, J. Liu, and Y. Shi: Mech. Eng., 2015, vol. 10, pp. 111–25.
5. C. Yap, C. Chua, Z. Dong, Z. Liu, D. Zhang, L. Loh, and S. Sing: Appl. Phys. Rev., 2015, vol. 2, p. 041101.10.1063/1.4935926 ↗
6. X. Zhang, C.J. Yocom, B. Mao, and Y. Liao: J. Laser Appl., 2019, vol. 31, p. 031201.10.2351/1.5085206 ↗
7. H. Jia, H. Sun, H. Wang, Y. Wu, and H. Wang: Int. J. Adv. Manuf. Technol., 2021, vol. 113, pp. 2413–35.10.1007/s00170-021-06810-3 ↗
8. E. Liverani, S. Toschi, L. Ceschini, and A. Fortunato: J. Mater. Process. Technol., 2017, vol. 249, pp. 255–63.10.1016/j.jmatprotec.2017.05.042 ↗
9. Y. Wang, T. Voisin, J. McKeown, J. Ye, N. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, T. Roehling, R. Ott, M. Santala, P. Depond, M. Matthews, A. Hamza, and T. Zhu: Nat. Mater., 2018, vol. 17, pp. 63–70.10.1038/nmat5021 ↗
10. A. Röttger, J. Boes, W. Theisen, M. Thiele, C. Esen, A. Edelmann, and R. Hellmann: Int. J. Adv. Manuf. Technol., 2020, vol. 108, pp. 769–83.10.1007/s00170-020-05371-1 ↗
11. M. Simonelli, Y.Y. Tse, and C. Tuck: J. Phys., 2012, vol. 371, p. 012084.
12. H. Rafi, N. Karthik, H. Gong, T. Starr, and B. Stucker: J. Mater. Eng. Perform., 2013, vol. 22, pp. 3872–83.10.1007/s11665-013-0658-0 ↗
13. P. Kumar, O. Prakash, and U. Ramamurty: Acta Mater., 2018, vol. 154, pp. 246–60.10.1016/j.actamat.2018.05.044 ↗
14. E. Brandl, U. Heckenberger, V. Holzinger, and D. Buchbinder: Mater. Des., 2012, vol. 34, pp. 159–69.10.1016/j.matdes.2011.07.067 ↗
15. W. Li, S. Li, J. Liu, A. Zhang, Y. Zhou, Q. Wei, C. Yan, and Y. Shi: Mater. Sci. Eng. A, 2016, vol. 663, pp. 116–25.10.1016/j.msea.2016.03.088 ↗
16. F. Trevisan, F. Calignano, M. Lorusso, J. Pakkanen, A. Aversa, E.P. Ambrosio, M. Lombardi, P. Fino, and D. Manfredi: Materials, 2017, vol. 10, p. 76.10.3390/ma10010076 ↗
17. J. Zhang, B. Song, Q. Wei, D. Bourell, and Y. Shi: J. Mater. Sci. Technol., 2019, vol. 35, pp. 270–84.10.1016/j.jmst.2018.09.004 ↗
18. S. Li, Q. Wei, Y. Shi, C.K. Chua, Z. Zhu, and D. Zhang: J. Mater. Sci. Technol., 2015, vol. 31, pp. 946–52.10.1016/j.jmst.2014.09.020 ↗
19. M. Leary, M. Mazur, H. Williams, E. Yang, A. Alghamdi, B. Lozanovski, X. Zhang, D. Shidid, L. Farahbod-Sternahl, G. Witt, I. Kelbassa, P. Choong, M. Qian, and M. Brandt: Mater. Des., 2018, vol. 157, pp. 179–99.10.1016/j.matdes.2018.06.010 ↗
20. I. Koutiri, E. Pessard, P. Peyre, O. Amlou, and T. De Terris: J. Mater. Process. Technol., 2018, vol. 255, pp. 536–46.10.1016/j.jmatprotec.2017.12.043 ↗
21. Z. Wang, K. Guan, M. Gao, X. Li, X. Chen, and X. Zeng: J. Alloy Compd., 2012, vol. 513, pp. 518–23.10.1016/j.jallcom.2011.10.107 ↗
22. J. Strößner, M. Terock, and U. Glatzel: Adv. Eng. Mater., 2015, vol. 17, pp. 1099–1105.10.1002/adem.201500158 ↗
23. T. Trosch, J. Strößner, R. Völkl, and U. Glatzel: Mater. Lett., 2016, vol. 164, pp. 428–31.10.1016/j.matlet.2015.10.136 ↗
24. M.D. Sangid, T.A. Book, D. Naragani, J. Rotella, P. Ravi, A. Finch, P. Kenesei, J.S. Park, H. Sharma, J. Almer, and X. Xiao: Addit. Manuf., 2018, vol. 22, pp. 479–96.
25. R. Darolia: Int. Mater. Rev., 2019, vol. 64, pp. 355–80.10.1080/09506608.2018.1516713 ↗
26. S. Babu, N. Raghavan, J. Raplee, S. Foster, C. Frederick, M. Haines, R. Dinwiddie, M. Kirka, A. Plotkowski, Y. Lee and R. Dehoff: Metall. Mater. Trans. A, 2018. vol. 49A, pp. 3764–80.10.1007/s11661-018-4702-4 ↗
27. L.N. Carter, M.M. Attallah, and R.C. Reed: Laser powder bed fabrication of nickel-base superalloys: influence of parameters; Characterisation, quantification and mitigation of cracking, in Superalloys 2012. E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, and J. Telesman, eds., TMS, Warrendale, 2012, pp. 577–86.10.1002/9781118516430.ch64 ↗
28. L.N. Carter, C. Martin, P.J. Withers, and M.M. Attallah: J. Alloy Compds., 2014, vol. 615, pp. 338–47.10.1016/j.jallcom.2014.06.172 ↗
29. S. Kou: Acta Mater., 2015, vol. 88, pp. 366–74.10.1016/j.actamat.2015.01.034 ↗
30. S. Kou: Weld. J., 2015, vol. 94, pp. 374–88.
31. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, and S.S. Babu: Int. Mater. Rev., 2016, vol. 61, pp. 315–60.10.1080/09506608.2015.1116649 ↗
32. S. Catchpole-Smith, N. Aboulkhair, L. Parry, C. Tuck, I.A. Ashcroft, and A. Clare: Addit. Manuf., 2017, vol. 15, pp. 113–22.
33. P. Kontis, E. Chauvet, Z. Peng, J. He, A. da Silva, D. Raabe, C. Tassin, J. Blandin, S. Abed, R. Dendievel, B. Gault, and G. Martin: Acta Mater., 2019, vol. 177, pp. 209–21.10.1016/j.actamat.2019.07.041 ↗
34. H. Peng, Y. Shi, S. Gong, H. Guo, and B. Chen: Mater. Des., 2018, vol. 159, pp. 155–69.10.1016/j.matdes.2018.08.054 ↗
35. A. Németh, D. Crudden, D. Collins, D. Armstrong, and R. Reed: Novel techniques to assess environmentally-assisted cracking in a Nickel-based superalloy. in Superalloys2016: Proceedings of the 13th International Symposium on Superalloys. M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S. Tin, eds., TMS, Warrendale, PA, 2016, pp. 801–10.
36. A. Németh, D. Crudden, D. Armstrong, D. Collins, K. Li, A. Wilkinson, C. Grovenor, and R. Reed: Acta Mater., 2017, vol. 126, 361–71.10.1016/j.actamat.2016.12.039 ↗
37. L.Z. He, Q. Zheng, X.F. Sun, G.C. Hou, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2004, vol. 380, pp. 340–48.10.1016/j.msea.2004.03.057 ↗
38. L. Zheng, G. Schmitz, Y. Meng, R. Chellali, and R. Schlesiger: Crit. Rev. Solid State Mater. Sci., 2012, vol. 37, pp. 181–214.10.1080/10408436.2011.613492 ↗
39. H.J. Chung, J.Y. Huh, and W.S. Jung: Mater. Charact., 2018, vol. 140, pp. 9–14.10.1016/j.matchar.2018.03.013 ↗
40. J. Kangazian, M. Shamanian, A. Kermanpur, E. Foroozmehr, and M. Badrossamay: Mater. Sci. Eng. A, 2021, vol. 823, p. 141742.10.1016/j.msea.2021.141742 ↗
41. A. Sengupta, S. Putatunda, L. Bartosiewicz, J. Hangas, M. Peputapeck, and E. Alberts: J. Mater. Eng. Perform., 1994, vol. 3, pp. 73–81.10.1007/BF02654502 ↗
42. S. Griffiths, H. Ghasemi-Tabasi, A. De Luca, J. Pado, S. Joglekar, J. Jhabvala, R. Logé, and C. Leinenbach: Mater. Charact., 2021, vol. 171, p. 110815.10.1016/j.matchar.2020.110815 ↗
43. N. Li, S. Huang, G. Zhang, R. Qin, W. Liu, H. Xiong, G. Shi, and J. Blackburn: J. Mater. Sci. Technol., 2019, vol. 35, 242–69.10.1016/j.jmst.2018.09.002 ↗
44. S.P. Murray, K.M. Pusch, A.T. Polonsky, C.J. Torbet, G.G.E. Seward, P. Nandwana, M.M. Kirka, R.R. Dehoff, N. Zhou, S.A.J. Forsik, W. Slye, and T.M. Pollock: Microstructure and tensile properties of a CoNi-based superalloy fabricated by selective electron beam melting. in Superalloys 2020. S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’Brien, and A. Suzuki, eds., Springer, Berlin, 2020, pp. 880–90.10.1007/978-3-030-51834-9_86 ↗
45. S. Murray, K. Pusch, A. Polonsky, C. Torbet, G. Seward, N. Zhou, S. Forsik, P. Nandwana, M. Kirka, R. Dehoff, W. Slye, and T. Pollock: Nat. Commun., 2020, vol. 11, p. 4975.10.1038/s41467-020-18775-0 ↗
46. J. Koßmann, C. Zenk, I. Lopez-Galilea, S. Neumeier, A. Kostka, S. Huth, W. Theisen, M. Göken, R. Drautz, and T. Hammerschmidt: J. Mater. Sci., 2015, vol. 50, pp. 6329–38.10.1007/s10853-015-9177-8 ↗
47. C. Stewart, S. Murray, A. Suzuki, T. Pollock, and C. Levi: Mater. Des., 2020, vol. 189, p. 108445.10.1016/j.matdes.2019.108445 ↗
48. N. Volz, C. Zenk, T. Halvaci, K. Matuszewska, S. Neumeier, and M. Göken: Castability and Recrystallization Behavior of γ’-Strengthened Co-Base Superalloys, Springer, Berlin, 2020.10.1007/978-3-030-51834-9_88 ↗
49. M. Tsunekane, A. Suzuki, and T. Pollock: Intermetallics, 2011, vol. 19, pp. 636–43.10.1016/j.intermet.2010.12.018 ↗
50. I. Lopez-Galilea, B. Ruttert, J. He, T. Hammerschmidt, R. Drautz, B. Gault, and W. Theisen: Addit. Manuf., 2019, vol. 30, p. 100874.
51. H. Wang, X. Zhang, G. Wang, J. Shen, G. Zhang, Y. Li, and M. Yan: J. Alloy Compd., 2019, vol. 807, p. 151662.10.1016/j.jallcom.2019.151662 ↗
52. B. Ruttert, M. Ramsperger, L. Mujica Roncery, I. Lopez-Galilea, C. Körner, and W. Theisen: Mater. Des., 2016, vol. 110, pp. 720–27.10.1016/j.matdes.2016.08.041 ↗
53. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.-Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9, pp. 676–82.10.1038/nmeth.2019 ↗
54. J.C. Yen, F.J. Chang, and S. Chang: IEEE Trans. Image Process., 1995, vol. 4, pp. 370–78.10.1109/83.366472 ↗
55. W. Lenthe, S. Singh, and M.D. Graef: Ultramicroscopy, 2019, vol. 207, p. 112841.10.1016/j.ultramic.2019.112841 ↗
56. University of Cambridge, Creep mechanisms, https://www.edax.com/products/ebsd/oim-analysis/oim-analysis-v8. Accessed 6 July 2021.
57. O. Sanchez-Mata, J.A. Muñiz-Lerma, X. Wang, S.E. Atabay, M. Attarian Shandiz, and M. Brochu: Mater. Sci. Eng. A, 2020, vol. 780, p. 139177.10.1016/j.msea.2020.139177 ↗
58. EOS GmbH, EOS Nickel Alloy IN939 Material Data Sheet, Tech. rep. 2021.
59. L. Carter, Selective Laser Melting of Nickel Superalloys for High Temperature Applications, Ph.D. thesis, University of Birmingham, 2013.
60. T.-W. Na, W.R. Kim, S.-M. Yang, O. Kwon, J.M. Park, G.-H. Kim, K.-H. Jung, C.-W. Lee, H.-K. Park, and H.G. Kim: Mater. Charact., 2018, vol. 143, pp. 110–17.10.1016/j.matchar.2018.03.003 ↗
61. N.J. Harrison, I. Todd, and K. Mumtaz: Acta Mater., 2015, vol. 94, pp. 59–68.10.1016/j.actamat.2015.04.035 ↗
62. M.J. Aziz: J. Appl. Phys., 1982, vol. 53, pp. 1158–68.10.1063/1.329867 ↗
63. R.A. Michi, A. Plotkowski, A. Shyam, R.R. Dehoff, and S.S. Babu: Int. Mater. Rev., 2021, pp. 1–48.
64. E. Scheil: Z. Metallkd., 1942, vol. 34, pp. 70–72.
65. M. Ramsperger, L. Mújica Roncery, I. Lopez-Galilea, R.F. Singer, W. Theisen, and C. Körner: Adv. Eng. Mater., 2015, vol. 17, pp. 1486–93.10.1002/adem.201500037 ↗
66. C. Körner: Int. Mater. Rev., 2016, vol. 61, pp. 361–77.10.1080/09506608.2016.1176289 ↗
67. M.P. Haines, N.J. Peter, S.S. Babu, and E.A. Jägle: Addit. Manuf., 2020, vol. 33, p. 101178.
68. A.T. Polonsky, M.P. Echlin, W.C. Lenthe, R.R. Dehoff, M.M. Kirka, and T.M. Pollock: Mater. Charact., 2018, vol. 143, pp. 171–81.10.1016/j.matchar.2018.02.020 ↗
69. A. Després, C. Mayer, M. Veron, E.F. Rauch, M. Bugnet, J.J. Blandin, G. Renou, C. Tassin, P. Donnadieu, and G. Martin: Materialia, 2021, vol. 15, p. 101037.10.1016/j.mtla.2021.101037 ↗
70. S. Pourbabak, M.L. Montero-Sistiaga, D. Schryvers, J. Van Humbeeck, and K. Vanmeensel: Mater. Charact., 2019, vol. 153, pp. 366–71.10.1016/j.matchar.2019.05.024 ↗
71. P. Deng, M. Karadge, R.B. Rebak, V.K. Gupta, B.C. Prorok, and X. Lou: Addit. Manuf., 2020, vol. 35, p. 101334.
72. G.A. Rao, M. Srinivas, and D. Sarma: Mater. Sci. Eng. A, 2006, vol. 435–436, pp. 84–99.10.1016/j.msea.2006.07.053 ↗
73. A.J. Cooper, N.I. Cooper, J. Dhers, and A.H. Sherry: Metall. Mater. Trans. A., 2016, vol. 47A, 4467–75.10.1007/s11661-016-3612-6 ↗
74. A. Suzuki, G.C. Denolf, and T.M. Pollock: Scripta Mater., 2007, vol. 56, pp. 385–88.10.1016/j.scriptamat.2006.10.039 ↗
75. A. Suzuki, and T.M. Pollock: Acta Mater., 2008, vol. 56, pp. 1288–97.10.1016/j.actamat.2007.11.014 ↗
76. Z. Fan, C. Wang, C. Zhang, Y. Yu, H. Chen, and Z. Yang: Mater. Sci. Eng. A, 2018, vol. 735, pp. 114–20.10.1016/j.msea.2018.07.106 ↗
77. Z.M. Chen, N.L. Okamoto, M. Demura, and H. Inui: Scripta Mater., 2016, vol. 121, pp. 28–31.10.1016/j.scriptamat.2016.04.029 ↗
78. K.V. Vamsi, S.P. Murray, and T.M. Pollock: The yield strength anomaly in Co-Ni design space. in Superalloys 2020. S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’Brien, and A. Suzuki, eds., Springer, Berlin, 2020, pp. 948–58.10.1007/978-3-030-51834-9_93 ↗
79. E.A. Lass: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2443–59.10.1007/s11661-017-4040-y ↗
80. X. Lou, P.L. Andresen, and R.B. Rebak: J. Nucl. Mater., 2018, vol. 499, pp. 182–90.10.1016/j.jnucmat.2017.11.036 ↗