An Updated Index Including Toughness for Hot-Cracking Susceptibility
Source abstract
Abstract
Hot cracking is one of the major defects that can occur in laser-based additive manufacturing. During the terminal stage of solidification, hot cracking initiates when the semi-solid matrix builds up excessive negative (tensile) pressure induced by thermal contraction. This study presents a new quantification of the trends in the above process: we estimate the volume change brought by thermal deformation through a perspective of energy conservation and combine it with the intergranular volume change induced by grain growth and liquid backflow to derive a criterion for hot-cracking initiation. Based on this, we propose two modified indexes that build on prior work, namely: (1) (|frac{dT}{dsqrt{f_{ ext{s}}}}|frac{1}{sqrt{1-eta }}) and (2) (|frac{dT}{dsqrt{f_{ ext{s}}}}|frac{1}{ar{E}}). Here, T is temperature, (f_{ ext{s}}) is the solid fraction of the semi-solid region, (eta ) is the shrinkage factor and (ar{E}) is the material toughness near the solidus temperature. Evaluating these indexes against experimental data reveals that hot-cracking susceptibility is strongly correlated with the second index and indeed is a function of material high-temperature toughness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. C.E. Roberts, D. Bourell, T. Watt, and J. Cohen: A novel processing approach for additive manufacturing of commercial aluminum alloys. Phys. Procedia, vol. 83, pp. 909–917. Laser Assisted Net Shape Engineering 9 International Conference on Photonic Technologies Proceedings of the LANE 2016, September 19–22, 2016 Fürth, Germany, 2016.10.1016/j.phpro.2016.08.095 ↗
2. S.Z. Uddin, D. Espalin, J. Mireles, P. Morton, C. Terrazas, S. Collins, L.E. Murr, and R. Wicker: Laser powder bed fusion fabrication and characterization of crack-free aluminum alloy 6061 using in-process powder bed induction heating. In Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, SFF 2017, 2020, pp. 214–27.
3. N. Kaufmann, M. Imran, T.M. Wischeropp, C. Emmelmann, S. Siddique, and F. Walther: Influence of process parameters on the quality of aluminium alloy en AW 7075 using Selective Laser Melting (SLM). In Physics Procedia, 2016, Elsevier B.V., vol. 83, pp. 918–26.10.1016/j.phpro.2016.08.096 ↗
4. C.M. Cheng, C.P. Chou, I.K. Lee, and I.C. Kuo: J. Mater. Sci. Technol., 2006, vol. 22(5), pp. 685–90.
5. X. Zhang, H. Chen, L. Xu, J. Xu, X. Ren, and X. Chen: Mater. Des., 2019, vol. 183, p. 12.
6. D.G. Eskin, Suyitno, and L. Katgerman, Prog. Mater. Sci., 2004, 49, 629–71110.1016/S0079-6425(03)00037-9 ↗
7. N. Hatami, R. Babaei, M. Dadashzadeh, and P. Davami: J. Mater. Process. Technol., 2008, vol. 205(1–3), pp. 506–13.10.1016/j.jmatprotec.2007.11.260 ↗
8. J.C. Lippold and D.J. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, Wiley, Hoboken, 2005.
9. R. Thavamani, V. Balusamy, J. Nampoothiri, R. Subramanian, and K.R. Ravi: J. Alloys Compd., 2018, vol. 740, pp. 870–78.10.1016/j.jallcom.2017.12.295 ↗
10. M. Saadati and A.K.E. Nobarzad: J. Manuf. Process., 2019, vol. 41, pp. 242–51.10.1016/j.jmapro.2019.03.032 ↗
11. H. Zhang, H. Zhu, X. Nie, J. Yin, Z. Hu, and X. Zeng: Scr. Mater., 2017, vol. 134, pp. 6–10.10.1016/j.scriptamat.2017.02.036 ↗
12. D.G. Eskin and L. Katgerman, Metall. Mater. Trans. A: Phys. Metall. Mater. Sci., 2007, vol. 38 A, pp. 1511–19.10.1007/s11661-007-9169-7 ↗
13. T.H. Courtney: Mechanical Behavior of Materials, McGraw-Hill, Boston, 2000.
14. N.N. Prokhorov: Russ. Cast. Prod., 1962, vol. 2(2), pp. 172–75.
15. M. Rappaz, J.M. Drezet, and M. Gremaud, A new hot-tearing criterion. Technical Report 2, 199910.1007/s11661-999-0334-z ↗
16. S. Kou: Acta Mater., 2015, vol. 88, pp. 366–74.10.1016/j.actamat.2015.01.034 ↗
17. J. Liu, H.P. Duarte, and S. Kou: Acta Mater., 2017, vol. 122, pp. 47–59.10.1016/j.actamat.2016.09.037 ↗
18. J.S. Watson, Fiber laser weldability of austenitic nickel alloys. Technical report, 2017.
19. C. Zhao, K. Fezzaa, R.W. Cunningham, H. Wen, F. De Carlo, L. Chen, A.D. Rollett, and T. Sun: Sci. Rep., 2017, vol. 7(1), pp. 1–11.10.1038/s41598-016-0028-x ↗
20. L.G. Margolin: Eng. Fract. Mech., 1984, vol. 19(3), pp. 539–43.10.1016/0013-7944(84)90010-9 ↗
21. D. Roylance, Introduction to Fracture Mechanics. Massachusetts Institute of .., Department of Materials Science and Engineering, 2001.
22. K. Nakata and F. Matsuda: Q. J. Jpn. Weld. Soc., 1995, vol. 13(1), pp. 106–15.10.2207/qjjws.13.106 ↗
23. J.-O. Andersson, T. Helander, L. Hdghmd, P. Shi, and B. Sundman, Thermo-Calc & DICTRA, computational tools for materials science. Technical Report~2, 2002.10.1016/S0364-5916(02)00037-8 ↗
24. E. Vaghefi and S. Serajzadeh, Met. Mater. Int., 2020.
25. K. Shojaei, S.V. Sajadifar, and G.G. Yapici: Mater. Sci. Eng. A., 2016, vol. 670, pp. 81–89.10.1016/j.msea.2016.05.113 ↗
26. T. Gan, Z.Q. Yu, Y.X. Zhao, and X.M. Lai: J. Phys.: Conf. Ser., 2018, vol. 1063, p. 12034.
27. F. Ozturk, S. Toros, and S. Kilic, Evaluation of tensile properties of 5052 type aluminum-magnesium alloy at warm temperatures. Technical report, 2008.
28. Y. Liu, Z. Zhu, Z. Wang, B. Zhu, Y. Wang, and Y. Zhang: Int. J. Adv. Manuf. Technol., 2018, vol. 96(9–12), pp. 4063–83.10.1007/s00170-018-1790-7 ↗
29. Q. Dai, Y. Deng, H. Jiang, J. Tang, and J. Chen: Mater. Sci. Eng. A, 2019, vol. 766, pp. 138325.10.1016/j.msea.2019.138325 ↗
30. Y. Jiang and X. Xiao: High-Temperature Tensile Deformation Behaviour of Aluminium Alloy 2024 and Prediction of Forming Limit Curves, in IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, 2018, vol. 439, pp. 042030.10.1088/1757-899X/439/4/042030 ↗
31. T. Soysal and S. Kou: Acta Mater., 2018, vol. 143, pp. 181–97.10.1016/j.actamat.2017.09.065 ↗
32. C. Xia and S. Kou: Metall Mater. Trans. B., 2021, vol. 52B(1), pp. 460–69.10.1007/s11663-020-02021-5 ↗
33. C. Xia and S. Kou: Sci. Technol. Weld. Join., 2020, vol. 25(8), pp. 690–97.10.1080/13621718.2020.1802897 ↗
34. ISO ISO, 6892-2: 2018 Metallic Materials-Tensile Testing-Part 2: Method of Test at Elevated Temperature, Geneva, Switzerland, ISO, 2018.