Interaction Between Ferrite Recrystallization and Austenite Formation in Dual-Phase Steel Manufacture
Source abstract
Abstract
Abstract In this publication, the effect of heating rate on microstructural evolution of manganese segregated cold reduced dual phase steels is systematically studied for different inter-critical temperatures and holding times. At slow heating rate, completion of ferrite recrystallization before austenite formation led to the preferential formation of austenite on the ferrite grain boundaries leading to a necklace austenite (now martensite) morphology. The slower austenite formation kinetics has been attributed to longer diffusion paths dictated by larger ferrite grain sizes. In medium heating rate condition, microstructure before austenite formation had partially recrystallized ferrite and partially spheroidized cementite. Rapid austenite growth occurred along the rolling direction in carbon-rich cementite regions and dislocation-rich recovered ferrite regions. The presence of partially recrystallized ferrite grains restricted the austenite growth in the normal direction and therefore enabled the formation of thin martensite bands parallel to the rolling direction. At fast heating rate, the microstructure before austenite formation predominately contained un-recrystallized ferrite and un-spheroidized cementite and therefore enabled faster austenite formation kinetics. Thicker martensite bands are formed at fast heating rates due to the absence of recrystallized grains, thereby, enabling the growth of austenite in all directions with a higher preference to the rolling direction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. B.B. He, M. Wang, L. Liu, and M.X. Huang: Mater. Sci. Technol. (United Kingdom)., 2019, vol. 35, pp. 2109–14.
2. J. Zhao and Z. Jiang: Prog. Mater. Sci., 2018, vol. 94, p. 94.10.1016/j.pmatsci.2018.01.006 ↗
3. M. Delincé, Y. Bréchet, J.D. Embury, M.G.D. Geers, P.J. Jacques, and T. Pardoen: Acta Mater., 2007, vol. 55, pp. 2337–50.10.1016/j.actamat.2006.11.029 ↗
4. S. Oliver, T.B. Jones, and G. Fourlaris: Mater. Charact., 2007, vol. 58, pp. 390–400.10.1016/j.matchar.2006.07.004 ↗
5. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 1544–57.10.1007/s11661-010-0551-5 ↗
6. L. Schemmann, S. Zaefferer, D. Raabe, F. Friedel, and D. Mattissen: Acta Mater., 2015, vol. 95, pp. 386–98.10.1016/j.actamat.2015.05.005 ↗
7. D. An, S. Il Baik, Q. Ren, M. Jiang, M. Zhu, D. Isheim, B.W. Krakauer, and D.N. Seidman: Mater. Charact., 2020, https://doi.org/10.1016/j.matchar.2020.110207.10.1016/j.matchar.2020.110207 ↗
8. A. Bag, K.K. Ray, and E.S. Dwarakadasa: Metall. Mater. Trans. A., 2001, vol. 32A, pp. 2207–17.10.1007/s11661-001-0196-5 ↗
9. A. Banis, E.H. Duran, V. Bliznuk, I. Sabirov, R.H. Petrov, and S. Papaefthymiou: Metals (Basel)., 2019, https://doi.org/10.3390/met9080877.10.3390/met9080877 ↗
10. C.I. Garcia and A.J. Deardo: Metall. Trans. A., 1981, vol. 12A, pp. 521–30.10.1007/BF02648551 ↗
11. W.J. Kaluba, R. Taillard, and J. Foct: Acta Mater., 1998, vol. 46, pp. 5917–27.10.1016/S1359-6454(98)00210-9 ↗
12. F.G. Caballero, C. Capdevila, and C.G. De Andrés: J. Mater. Sci., 2002, vol. 37, pp. 3533–40.10.1023/A:1016579510723 ↗
13. C. García De Andrés, F.G. Caballero, C. Capdevila, and H.K.D.H. Bhadeshia: Scr. Mater., 1998, vol. 39, pp. 791–96.10.1016/S1359-6462(98)00146-8 ↗
14. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Trans. A., 1981, vol. 12A, pp. 1419–28.10.1007/BF02643686 ↗
15. A. Karmakar, M. Ghosh, and D. Chakrabarti: Mater. Sci. Eng. A., 2013, vol. 564, pp. 389–99.10.1016/j.msea.2012.11.109 ↗
16. D.Z. Yang, E.L. Brown, D.K. Matlock, and G. Krauss: Metall. Trans. A., 1985, vol. 16, pp. 1385–92.10.1007/BF02658671 ↗
17. N. Peranio, F. Roters, and D. Raabe: Mater. Sci. Forum., 2012, vol. 715–716, pp. 13–22.10.4028/www.scientific.net/MSF.715-716.13 ↗
18. N. Peranio, Y.J. Li, F. Roters, and D. Raabe: Mater. Sci. Eng. A., 2010, vol. 527, pp. 4161–68.10.1016/j.msea.2010.03.028 ↗
19. I.A. El-Sesy, H.J. Klaar, and A.H.A. Hussein: Steel Res., 1990, vol. 61, pp. 131–35.10.1002/srin.199000317 ↗
20. C.P. Scott, F. Fazeli, B. Shalchi Amirkhiz, I. Pushkareva, and S.Y.P. Allain: Mater. Sci. Eng. A., 2017, vol. 703, pp. 293–303.10.1016/j.msea.2017.07.051 ↗
21. M. Bellavoine, M. Dumont, J. Drillet, V. Hébert, and P. Maugis: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 2865–75.10.1007/s11661-018-4642-z ↗
22. F. Perrard and C. Scott: ISIJ Int., 2007, vol. 47, pp. 1168–77.10.2355/isijinternational.47.1168 ↗
23. G.H. Zhu, X.H. Zhang, and W.M. Mao: Front. Mater. Sci. China., 2009, vol. 3, pp. 442–46.10.1007/s11706-009-0059-3 ↗
24. L. Kestens, A.C.C. Reis, W.J. Kaluba, and Y. Houbaert: Mater. Sci. Forum., 2004, vol. 467–470, pp. 287–92.10.4028/www.scientific.net/MSF.467-470.287 ↗
25. T. Lolla, G. Cola, B. Narayanan, B. Alexandrov, and S.S. Babu: Mater. Sci. Technol., 2011, vol. 27, pp. 863–75.10.1179/174328409X433813 ↗
26. M. Mazinani and W.J. Poole: Metall. Mater. Trans. A., 2007, vol. 38A, pp. 328–39.10.1007/s11661-006-9023-3 ↗
27. J. Huang, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A., 2004, vol. 35A, pp. 3363–75.10.1007/s11661-004-0173-x ↗
28. M. Kulakov, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 3564–76.10.1007/s11661-013-1721-z ↗
29. C. Philippot, M. Bellavoine, M. Dumont, K. Hoummada, J. Drillet, V. Hebert, and P. Maugis: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 66–77.10.1007/s11661-017-4407-0 ↗
30. A. Chbihi, D. Barbier, L. Germain, A. Hazotte, and M. Gouné: J. Mater. Sci., 2014, vol. 49, pp. 3608–21.10.1007/s10853-014-8029-2 ↗
31. A. Karmakar, M. Mandal, A. Mandal, M. Basiruddin Sk, S. Mukherjee, and D. Chakrabarti: Metall. Mater. Trans. A., 2016, vol. 47A, pp. 268–81.10.1007/s11661-015-3248-y ↗
32. F.M. Castro-Cerda, F. Vercruysse, T.N. Minh, L. Kestens, A. Monsalve, and R. Petrov: Steel Res. Int., 2016, https://doi.org/10.1002/srin.201600351.10.1002/srin.201600351 ↗
33. P. Roumen, S. Jurij, K. Wlodzimierz, and K. Leo: Mater. Sci. Forum., 2012, vol. 715–716, pp. 661–66.
34. M. Bellavoine, M. Dumont, M. Dehmas, A. Stark, N. Schell, J. Drillet, V. Hébert, and P. Maugis: Mater. Charact., 2019, vol. 154, pp. 20–30.10.1016/j.matchar.2019.05.020 ↗
35. R. Petrov, F. Hajyakbari, F.R. Saz, J. Sidor, M.J. Santofimia, J. Sietsma, and L. Kestens: Mater. Sci. Forum., 2013, vol. 753, pp. 554–58.10.4028/www.scientific.net/MSF.753.554 ↗
36. H. Azizi-Alizamini, M. Militzer, and W.J. Poole: ISIJ Int., 2011, vol. 51, pp. 958–64.10.2355/isijinternational.51.958 ↗
37. D. De Knijf, A. Puype, C. Föjer, and R. Petrov: Mater. Sci. Eng. A., 2015, vol. 627, pp. 182–90.10.1016/j.msea.2014.12.118 ↗
38. L.S. Thomas and D.K. Matlock: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 4456–73.10.1007/s11661-018-4742-9 ↗
39. C. Zheng and D. Raabe: Acta Mater., 2013, vol. 61, pp. 5504–17.10.1016/j.actamat.2013.05.040 ↗
40. B. Zhu and M. Militzer: Metall. Mater. Trans. A., 2015, vol. 46A, pp. 1073–84.10.1007/s11661-014-2698-y ↗
41. T.F. Majka, D.K. Matlock, and G. Krauss: Metall. Mater. Trans. A., 2002, vol. 33A, pp. 1627–37.10.1007/s11661-002-0172-8 ↗
42. B. Bandi, J. van Krevel, N. Aslam, and P. Srirangam: JOM., 2019, vol. 71, pp. 1386–95.10.1007/s11837-019-03358-2 ↗
43. ASTM: Practice, 2011, pp. 1–7.
44. A.S.T.M. Standard: ASTM Int., 2012, vol. E112–12, pp. 1–27.
45. A. Ghosh: in Sadhana—Academy Proceedings in Engineering Sciences, vol. 26, 2001, pp. 5–24.10.1007/BF02728476 ↗
46. H. Hu and S.R. Goodman: Metall. Trans., 1970, vol. 1, pp. 3057–64.10.1007/BF03038419 ↗
47. S. Janakiram, P.S. Phani, G. Ummethala, S.K. Malladi, J. Gautam, and L.A.I. Kestens: Scr. Mater., 2020, https://doi.org/10.1016/j.scriptamat.2020.113676.10.1016/j.scriptamat.2020.113676 ↗
48. Y. Granbom: Structure and Mechanical Properties of Dual Phase Steels—An Experimental and Theoretical Analysis, 2010.
49. T. Ogawa: Int. J. Mech. Mater. Eng., 2015, https://doi.org/10.1186/s40712-015-0049-4.10.1186/s40712-015-0049-4 ↗
50. B. Bandi, J. Van Krevel, S. Nandi, Z. Husain, and P. Srirangam: Mater. Today., 2019, vol. 41, pp. 1030–34.
51. C. Bos, M.G. Mecozzi, D.N. Hanlon, M.P. Aarnts, and J. Sietsma: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 3602–10.10.1007/s11661-011-0696-x ↗
52. E. Navara and R. Harrysson: Scr. Metall., 1984, vol. 18, pp. 605–10.10.1016/0036-9748(84)90350-8 ↗
53. A. Rollett, F. Humphreys, G.S. Rohrer, and M. Hatherly: Recrystallization and Related Annealing Phenomena: Second Edition, 2004.10.1016/B978-008044164-1/50016-5 ↗