journal article·2021-05

Rejuvenation of Directionally Solidified and Single-Crystal Nickel-Base Superalloys

L. H. Rettberg, P. G. Callahan, B. R. Goodlet, T. M. Pollock

Publisher page

Abstract

During service, superalloy turbine components degrade over time by creep and fatigue deformation mechanisms due to a complex combination of stresses at high temperatures. The high cost of fabricating Ni-base superalloy components and, consequently, replacement components has encouraged the development of rejuvenation (restoration) procedures to extend useful service life. The processes that limit repeated rejuvenation of directionally solidified GTD444 and single-crystal Rene N5(SX) alloys have been studied in detail. A rejuvenation cycle includes a rejuvenation heat treatment and/or small-scale material removal, followed by creep or fatigue testing. With the application of multiple rejuvenation cycles, the total creep rupture life of Rene N5(SX) tested at 982 °C and 206 MPa was extended by a factor of 2.8 over the baseline rupture life. To produce this increase in rupture life, creep strains were limited to 2 or 3 pct prior to application of a rejuvenation cycle, involving solutioning at 28 °C below the $$\gamma \prime $$ solvus temperature for 2 hours and aging at 1079 °C for 4 hours. Rejuvenation of compressive hold-time fatigue damage was also successful with the use of small-scale material removal. Due to the tortuosity of the grain boundaries in GTD444(DS), some boundaries are initially oriented transverse to the growth direction. The enhanced plasticity near these grain boundaries may be the primary reason why the initially single-crystal Rene N5(SX) specimens were more amenable to rejuvenation than GTD444(DS). For both alloys, recrystallization after multiple rejuvenation cycles was responsible for early failure during the subsequent creep test. Resonant ultrasound spectroscopy was successfully implemented to detect the presence of recrystallized grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. R. Hart, H. Gayter, J. Inst. Metals 96 (1968) 338–344.
2. J. Dennison, P. Holmes, B. Wilshire, Mater. Sci. Eng. 33 (1978) 35–47.10.1016/0025-5416(78)90151-9 ↗
3. R. Stevens, P. Flewitt, Mater. Sci. Eng. 50 (1981) 271–284.10.1016/0025-5416(81)90186-5 ↗
4. M. Mclean, H. Tipler, in: Proc. Fifth Symposium on Superalloys, ASM, Materials Park, OH, Superalloys 1984, pp. 73–82.10.7449/1984/Superalloys_1984_73_82 ↗
5. M. D. Ross, G. T. Bennett, D. C. Stewart, Rejuvenation of Turbine Blade Material by Thermal Treatment., Technical Report, DTIC Document, 1979.10.21236/ADA077527 ↗
6. J. Wortmann, Mater. Sci. Technol. 1 (1985) 644–650.10.1179/mst.1985.1.8.644 ↗
7. T. Maccagno, A. Koul, J.-P. Immarigeon, L. Cutler, R. Allem, G. L’espérance (1990) Metall. Trans. A 21, 3115–3125.10.1007/BF02647308 ↗
8. E. Lvova, J. Mater. Eng. Perform. 16 (2007) 254–264.10.1007/s11665-007-9046-y ↗
9. W. McCall, Combustion 42 (1971) 27.
10. M. Lamberigts, C. Lecomte-Mertens, P. Vierset, in: Application of Advanced Material for Turbomachinery and Rocket Propulsion.
11. B. Ruttert, D. Bürger, L. M. Roncery, A. B. Parsa, P. Wollgramm, G. Eggeler, W. Theisen, Materials & Design 134 (2017) 418–425.10.1016/j.matdes.2017.08.059 ↗
12. Z. Yao, C. C. Degnan, M. A. Jepson, R. C. Thomson, Metallurgical and Materials Transactions A 47A (2016) 6330–6338.10.1007/s11661-016-3790-2 ↗
13. J. Kuipers, K. Wiens, B. Ruggiero, in: ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, American Society of Mechanical Engineers Digital Collection.
14. T. M. Pollock, S. Tin, J. Propul. Power 22 (2006) 361–374.10.2514/1.18239 ↗
15. V. K. Tolpygo, D. Clarke, Acta Mater. 52 (2004) 5115–5127.
16. J. Nychka, D. Clarke, Oxid. Met. 63 (2005) 325–352.10.1007/s11085-005-4391-4 ↗
17. A. Evans, M. He, A. Suzuki, M. Gigliotti, B. Hazel, T. Pollock, Acta Mater. 57 (2009) 2969–2983.10.1016/j.actamat.2009.02.047 ↗
18. T. M. Pollock, B. Laux, C. L. Brundidge, A. Suzuki, M. Y. He, J. Am. Ceram. Soc. 94 (2011) 136–145.10.1111/j.1551-2916.2011.04578.x ↗
19. R. Hoeft, E. Gebhardt, Heavy-duty gas turbine operating and maintance considerations, Technical Report, GE Energy Services, 2000.
20. L. Rettberg, M. Tsunekane, T. Pollock, Superalloys 2012 (2012) 341–349.10.7449/2012/Superalloys_2012_341_349 ↗
21. P. Callahan, J. Simmons, M. De Graef, Modell. Simul. in Mater. Sci. Eng. 21 (2012) 015003.10.1088/0965-0393/21/1/015003 ↗
22. J. MacSleyne, J. Simmons, M. De Graef, Modell. Simul. in Mater. Sci. Eng. 16 (2008) 045008.10.1088/0965-0393/16/4/045008 ↗
23. J. MacSleyne, J. Simmons, M. De Graef, Acta Mater. 56 (2008) 427–437.10.1016/j.actamat.2007.09.039 ↗
24. L. Rettberg, T. Pollock, Acta Mater. 73 (2014) 287–297.10.1016/j.actamat.2014.03.052 ↗
25. L. Rettberg, B. Goodlet, T. Pollock, NDT&E International 83 (2016) 68–77.10.1016/j.ndteint.2016.05.004 ↗
26. R. Bürgel, P. Portella, J. Preuhs, in: Proc. 12th Symposium on Superalloys, ASM, Materials Park, OH, Superalloys (2000), pp. 341–49.
27. R. C. Reed, The superalloys: fundamentals and applications, Cambridge University Press, 2006.10.1017/CBO9780511541285 ↗
28. D. B. Miracle, R. Darolia, Intermetallic Compounds: Principles and Practice 2 (2000) 53–72.
29. M. Pomeroy, Mater. Des. 26 (2005) 223–231.10.1016/j.matdes.2004.02.005 ↗
30. M. Zagula-Yavorska, M. Wierzbińska, K. Gancarczyk, J. Sieniawski, J. Microsc. (2016).
31. J. Nystrom, T. Pollock, W. Murphy, A. Garg, Metall. Mater. Trans. A 28 (1997) 2443–2452.10.1007/s11661-997-0001-1 ↗
32. B. Goodlet, C. Torbet, E. Biedermann, L. Jauriqui, J. Aldrin, T. Pollock, Ultrasonics 77 (2017) 183–196.10.1016/j.ultras.2017.02.002 ↗
33. A. Baldan, J. Mater. Sci. 26 (1991) 3409–3421.10.1007/BF00557126 ↗
34. M. Lafata, L. Rettberg, M. He, T. Pollock, Metallurgical and Materials Transactions A 49 (2018) 105–116.10.1007/s11661-017-4392-3 ↗
35. F. R. N. Nabarro, F. De Villiers, Physics of creep and creep-resistant alloys, CRC press, 1995.
36. T. Pollock, R. Field, Dislocat. Solids 11 (2002) 547–618.10.1016/S1572-4859(02)80014-6 ↗
37. D. Cox, B. Roebuck, C. Rae, R. Reed, Mater. Sci. Technol. 19 (2003) 440–446.10.1179/026708303225010731 ↗
38. G. K. Bouse, M. F. Henry, J. C. Schaeffer, et al., Nickel base superalloys and turbine components fabricated therefrom, 2005. US Patent 6,908,518.
39. E. W. Ross, C. S. Wukusick, W. T. King, Nickel-based superalloys for producing single crystal articles having improved tolerance to low angle grain boundaries, 1995. US Patent 5,399,313.
40. C. S. Wukusick, L. Buchakjian Jr, Nickel-base superalloys, 1991. Patent Number GB 2235697.