High-Temperature Mechanical Properties of Aluminum Alloy Matrix Composites Reinforced with Zr and Ni Trialumnides Synthesized by In Situ Reaction
Source abstract
Abstract
High-temperature strengths and stabilities of Al3Ni and Al3Zr phases can be used to develop heat-resistant Al-matrix composites. In the current study, Al-1Mg-0.8Mn-0.8V alloy matrix composites are synthesized by in-situ reaction of K2ZrF6 salt and Ni powder to yield Al3Zr- and Al3Ni-reinforcing phases. The as-cast microstructural and room-temperature and high-temperature tensile properties of the composite are investigated. The microstructure of the composites contain α-Al, Al3Zr, Al3Ni, and Al10V phases. The eutectic mixture comprises alternating Al3Ni and α-Al phases with fine Al3Zr precipitates distributed in the interlamellar regions. The (2 pct Al3Zr + 15.2 pct Al3Ni)/Al-alloy composite shows the highest mechanical properties at room temperature, with a tensile strength of 198 MPa and a fracture strain of 6.55 pct. At 200 and 300 °C, tensile strengths of (2 pct Al3Zr + 13.3 pct Al3Ni)/Al-alloy and (2 pct Al3Zr + 15.2 pct Al3Ni)/Al-alloy composites reach 175 MPa and 166 MPa, and 191 MPa and 155 MPa, respectively. At 350 °C, the highest tensile strength of this composite family reaches 82 MPa, which surpasses some of the existing Al-Si alloys used in automotive pistons, suggesting its potential high-temperature applications. Analysis indicates that the fracture mode of the present composites is ductile. Transgranular cleavage fracture of coarse, brittle Al10V phase, and microvoid coalescence are the main failure mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Farkoosh, A.R., Grant Chen, X., and Pekguleryuz, M., Materials Science and Engineering: A, 2015, vol. 620, pp. 181-189.10.1016/j.msea.2014.10.004 ↗
2. Kumar, S., Panwar, R.S., and Pandey, O.P., Metallurgical and Materials Transactions A, 2013, vol. 44(3), pp. 1548-1565.10.1007/s11661-012-1504-y ↗
3. Pandey, A.B., Majumdar, B.S., and Miracle, D.B., Metallurgical and Materials Transactions A, 2000, vol. 31(3), pp. 921-936.10.1007/s11661-000-1011-4 ↗
4. Gautam, G., Ghose, A.K., and Chakrabarty, I., Metallurgical and Materials Transactions A, 2015, vol. 46(12), pp. 5952-5961.10.1007/s11661-015-3170-3 ↗
5. Asghar, Z., Requena, G., and Boller, E., Acta Materialia, 2011, vol. 59(16), pp. 6420-6432.10.1016/j.actamat.2011.07.006 ↗
6. Javidani, M. and Larouche, D., International Materials Reviews, 2014, vol. 59(3), pp. 132-158.10.1179/1743280413Y.0000000027 ↗
7. Mohamed, A.M.A., Samuel, F.H., and Kahtani, S.A., Mater. Sci. Eng. A, 2013, vol. 577, pp. 64-72.10.1016/j.msea.2013.03.084 ↗
8. Ye, H., Journal of Materials Engineering and Performance, 2003, vol. 12(3), pp. 288-297.10.1361/105994903770343132 ↗
9. Shaha, S.K., Czerwinski, F., Kasprzak, W., Friedman, J., and Chen, D.L., Materials Science and Engineering: A, 2016, vol. 652, pp. 353-364.10.1016/j.msea.2015.11.049 ↗
10. Li, G., Liao, H., Suo, X., Tang, Y., Dixit, U.S., and Petrov, P., Materials Science and Engineering: A, 2018, vol. 709, pp. 90-96.10.1016/j.msea.2017.10.049 ↗
11. 11. Rakhmonov, J., Timelli, G., and Bonollo, F., Materials Characterization, 2017, vol. 128, pp. 100-108.10.1016/j.matchar.2017.03.039 ↗
12. 12. Lee, H.M., Lee, J., and Lee, Z.-H., Scripta Metallurgica et Materialia, 1991, vol. 25(3), pp. 517-520.10.1016/0956-716X(91)90082-C ↗
13. 13. Fan, Y. and Makhlouf, M.M., Materials Science and Engineering: A, 2016, vol. 654, pp. 228-235.10.1016/j.msea.2015.12.044 ↗
14. Rakhmonov, J., Timelli, G., and Bonollo, F., Advanced Engineering Materials, 2016, vol. 18(7), pp. 1096-1105.10.1002/adem.201500468 ↗
15. Knipling, K.E., Dunand, D.C., and Seidman, D.N., Zeitschrift für Metallkunde, 2006, vol. 97(3), pp. 246-265.10.3139/146.101249 ↗
16. Fan, Y.Y. and Makhlouf, M.M., Materials Science Forum, 2013, vol. 765, pp. 8-12.10.4028/www.scientific.net/MSF.765.8 ↗
17. Gao, T., Li, D., Wei, Z., and Liu, X., Materials Science and Engineering: A, 2012, vol. 552, pp. 523-529.10.1016/j.msea.2012.05.081 ↗
18. Hernandez-Sandoval, J., Garza-Elizondo, G.H., Samuel, A.M., Valtiierra, S., and Samuel, F.H., Materials & Design, 2014, vol. 58, pp. 89-101.10.1016/j.matdes.2014.01.041 ↗
19. Uan, J.Y. and Lui, T.S., Cast Metals, 2016, vol. 6(4), pp. 210-216.10.1080/09534962.1994.11819152 ↗
20. Ragab, M. and Salem, H.G., Powder Technology, 2012, vol. 222, pp. 108-116.10.1016/j.powtec.2012.02.011 ↗
21. Li, Y., Yang, Y., Wu, Y., Wang, L., and Liu, X., Materials Science and Engineering: A, 2010, vol. 527(26), pp. 7132-7137.10.1016/j.msea.2010.07.073 ↗
22. Yang, Y., Yu, K., Li, Y., Zhao, D., and Liu, X., Materials & Design, 2012, vol. 33, pp. 220-225.10.1016/j.matdes.2011.06.058 ↗
23. Girisha, H.N., Sharma, K.V., International Journal of Scientific & Engineering Research, 2012, vol. 3(2), pp. 1-4.
24. Nam, S.W., and Lee, D.H. (2000) Met. Mater., vol. 6(1), p. 13.10.1007/BF03026339 ↗
25. Wang, F., Liu, Z., Qiu, D., Taylor, J.A., Easton, M.A., and Zhang, M.-X., Acta Materialia, 2013, vol. 61(1), pp. 360-370.10.1016/j.actamat.2012.09.075 ↗
26. Meng, F., Wang, Z., Zhao, Y., Zhang, D., and Zhang, W., Metals, 2016, vol. 7(1), pp. 1010.3390/met7010010 ↗
27. Gautam, G. and Mohan, A., Journal of Alloys and Compounds, 2015, vol. 649, pp. 174-183.10.1016/j.jallcom.2015.07.096 ↗
28. Yang, H.-j., Zhao, Y.-t., Chen, G., Zhang, S.-l., and Chen, D.-b., Transactions of Nonferrous Metals Society of China, 2012, vol. 22(3), pp. 571-576.10.1016/S1003-6326(11)61215-6 ↗
29. 29. Lei, J., Xiaolu, W., Hui, L., Yutao, Z., Yonggang, Y., and Jianchao, C., Rare Metal Materials and Engineering, 2016, vol. 45(11), pp. 2798-2803.10.1016/S1875-5372(17)30043-7 ↗
30. Wang, H., Li, G., Zhao, Y., and Zhang, Z., Journal of Alloys and Compounds, 2011, vol. 509(18), pp. 5696-5700.10.1016/j.jallcom.2011.02.139 ↗
31. Fan, Y. and Makhlouf, M.M., Metallurgical and Materials Transactions A, 2015, vol. 46(9), pp. 3808-3812.10.1007/s11661-015-3051-9 ↗
32. Jones, D.R.H. and May, G.J., Acta Metall., 1975, vol. 23, 29-34.10.1016/0001-6160(75)90066-8 ↗
33. Davies, J.R., Courtney, T.H., and Przystupa, M.A., Metallurgical Transactions A, 1980, vol. 11(2), pp. 323-332.10.1007/BF02660637 ↗
34. Uan, J.Y., Chen, L.H., and Lui, T.S., Acta Materialia, 2001, vol. 49(2), pp. 313-320.10.1016/S1359-6454(00)00309-8 ↗
35. GmbH, M. (2016) Pistons and Engine Testing, 2nd edn. Springer, Stuttgart.10.1007/978-3-658-09941-1 ↗
36. Feng, J., Ye, B., Zuo, L., Qi, R., Wang, Q., Jiang, H., Huang, R., and Ding, W., Materials Science and Engineering: A, 2017, vol. 706, pp. 27-37.10.1016/j.msea.2017.08.114 ↗
37. Yang, Y., Zhong, S.-Y., Chen, Z., Wang, M., Ma, N., and Wang, H., Journal of Alloys and Compounds, 2015, vol. 647, pp. 63-69.10.1016/j.jallcom.2015.05.167 ↗
38. 38. Wang, E.R., Hui, X.D., and Chen, G.L., Materials & Design, 2011, vol. 32(8-9), pp. 4333-4340.10.1016/j.matdes.2011.04.005 ↗
39. Qian, Z., Liu, X., Zhao, D., and Zhang, G., Materials Letters, 2008, vol. 62(14), pp. 2146-2149.10.1016/j.matlet.2007.11.035 ↗
40. Hatano, T., Physical Review B, 2006, vol. 74(2), pp. 020102(R)10.1103/PhysRevB.74.020102 ↗
41. 41. Wang, X., Zhao, Y., Chen, G., Cheng, X., Zhang, H., and Zhang, Z., Rare Metal Materials and Engineering, 2007, vol. 36(2), pp. 259-263.
42. 42. Yamashita, K., Fujimoto, I., Murakumo, T., Kumal, S., and Sato, A., Philosophical Magazine A, 2000, vol. 80(1), pp. 219-235.10.1080/01418610008212050 ↗
43. Peng, G., Tietao, Z., Xiaoqing, X., Zhi, G., and Li, C., Rare Metal Materials and Engineering, 2013, vol. 42(1), pp. 6-13.10.1016/S1875-5372(13)60028-4 ↗