Strain Rate Sensitivity and Deformation Mechanism of Carbon Nanotubes Reinforced Aluminum Composites
Source abstract
Abstract
The deformation mechanism of carbon nanotubes (CNTs) reinforced Al (CNT/Al) composites at room temperature is yet to be discovered. In this study, CNT/Al composites and ultrafine-grained (UFG) Al prepared by flake powder metallurgy were subjected to strain rate jump tests to study the effect of CNTs on the deformation mechanism of the UFG Al. The results showed that the addition of CNTs greatly influenced the deformation behavior and microstructure, and with CNTs increasing from 0 to 2 vol pct, the strain rate sensitivity increased from 0.015 to 0.024, while the apparent activation volume decreased from 71.7 b3 to 39.3 b3. This phenomenon originated from both the CNTs constrained grain refinement and the increasing dislocation density caused by CNTs, nanocrystalline grains, and intragranular Al4C3. Thermal activation analysis indicated that the rate-controlling mechanisms of both the UFG Al and CNT/Al composites were the forest dislocation cutting. This work may provide insight into stabilizing uniform tensile deformation by increasing strain rate hardening in metal matrix composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. M. Dao, L. Lu, R.J. Asaro, J.T.M. De Hosson, and E. Ma: Acta Mater., 2007, vol. 55, pp. 4041–65.10.1016/j.actamat.2007.01.038 ↗
2. M.A. Meyers, A. Mishra, and D.J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427–556.10.1016/j.pmatsci.2005.08.003 ↗
3. H. Van Swygenhoven: Science, 2002, vol. 296, pp. 66–7.10.1126/science.1071040 ↗
4. Y.T. Zhu and T.G. Langdon: Mater. Sci. Eng. A, 2005, vol. 409, pp. 234–42.10.1016/j.msea.2005.05.111 ↗
5. B. Zhu, R.J. Asaro, P. Krysl, and R. Bailey: Acta Mater., 2005, vol. 53, pp. 4825–38.10.1016/j.actamat.2005.06.033 ↗
6. Q. Wei, S. Cheng, K.T. Ramesh, and E. Ma: Mater. Sci. Eng. A, 2004, vol. 381, pp. 71–9.10.1016/j.msea.2004.03.064 ↗
7. V. Yamakov, D. Wolf, S.R. Phillpot, A.K. Mukherjee, and H. Gleiter: Nat. Mater., 2003, vol. 3, p. 43.10.1038/nmat1035 ↗
8. L. Jiang, H. Wen, H. Yang, T. Hu, T. Topping, D. Zhang, E.J. Lavernia, and J.M. Schoenung: Acta Mater., 2015, vol. 89, pp. 327–43.10.1016/j.actamat.2015.01.062 ↗
9. L.-Y. Chen, J.-Q. Xu, H. Choi, M. Pozuelo, X. Ma, S. Bhowmick, J.-M. Yang, S. Mathaudhu, and X.-C. Li: Nature, 2015, vol. 528, p. 539.10.1038/nature16445 ↗
10. G. Liu, G.J. Zhang, F. Jiang, X.D. Ding, Y.J. Sun, J. Sun, and E. Ma: Nat. Mater., 2013, vol. 12, p. 344.10.1038/nmat3544 ↗
11. Y. Kim, J. Lee, M.S. Yeom, J.W. Shin, H. Kim, Y. Cui, J.W. Kysar, J. Hone, Y. Jung, S. Jeon, and S.M. Han: Nat. Commun., 2013, vol. 4, p. 2114.10.1038/ncomms3114 ↗
12. D. Zhou, H. Geng, D. Zhang, W. Zeng, C. Kong, and P. Munroe: Mater. Sci. Eng. A, 2017, vol. 688, pp. 164–8.10.1016/j.msea.2017.02.006 ↗
13. Z. Li, L. Zhao, Q. Guo, Z. Li, G. Fan, C. Guo, and D. Zhang: Scr. Mater., 2017, vol. 131, pp. 67–71.10.1016/j.scriptamat.2017.01.015 ↗
14. L. Zhao, Q. Guo, Z. Li, Z. Li, G. Fan, D.-B. Xiong, Y. Su, J. Zhang, Z. Tan, and D. Zhang: Int. J. Plast., 2018, vol. 105, pp. 128–40.10.1016/j.ijplas.2018.02.006 ↗
15. S.C. Tjong: Mater. Sci. Eng. R Reports, 2013, vol. 74, pp. 281–350.10.1016/j.mser.2013.08.001 ↗
16. S.R. Bakshi, D. Lahiri, and A. Agarwal: Int. Mater. Rev., 2010, vol. 55, pp. 41–64.10.1179/095066009X12572530170543 ↗
17. B. Chen, S. Li, H. Imai, J. Umeda, M. Takahashi, and K. Kondoh: Micron, 2015, vol. 69, pp. 1–5.10.1016/j.micron.2014.10.005 ↗
18. X. Yang, E. Liu, C. Shi, C. He, J. Li, N. Zhao, and K. Kondoh: J. Alloys Compd., 2013, vol. 563, pp. 216–20.10.1016/j.jallcom.2013.02.066 ↗
19. X. Yang, T. Zou, C. Shi, E. Liu, C. He, and N. Zhao: Mater. Sci. Eng. A, 2016, vol. 660, pp. 11–8.10.1016/j.msea.2016.02.062 ↗
20. Z.Y. Liu, B.L. Xiao, W.G. Wang, and Z.Y. Ma: Carbon N. Y., 2013, vol. 62, pp. 35–42.10.1016/j.carbon.2013.05.049 ↗
21. H. Kwon, M. Estili, K. Takagi, T. Miyazaki, and A. Kawasaki: Carbon N. Y., 2009, vol. 47, pp. 570–7.10.1016/j.carbon.2008.10.041 ↗
22. L. Jiang, Z. Li, G. Fan, L. Cao, and D. Zhang: Carbon N. Y., 2012, vol. 50, pp. 1993–8.10.1016/j.carbon.2011.12.057 ↗
23. R. Xu, Z. Tan, D. Xiong, G. Fan, Q. Guo, J. Zhang, Y. Su, Z. Li, and D. Zhang: Compos. Part A Appl. Sci. Manuf., 2017, vol. 96, pp. 57–66.10.1016/j.compositesa.2017.02.017 ↗
24. H.J. Choi and D.H. Bae: Scr. Mater., 2011, vol. 65, pp. 194–7.10.1016/j.scriptamat.2011.03.038 ↗
25. F. Mokdad, D.L. Chen, Z.Y. Liu, D.R. Ni, B.L. Xiao, and Z.Y. Ma: Mater. Sci. Eng. A, 2017, vol. 695, pp. 322–31.10.1016/j.msea.2017.04.006 ↗
26. W.J. Kim and S.H. Lee: Compos. Part A Appl. Sci. Manuf., 2014, vol. 67, pp. 308–15.10.1016/j.compositesa.2014.09.008 ↗
27. F. Mokdad, D.L. Chen, Z.Y. Liu, D.R. Ni, B.L. Xiao, and Z.Y. Ma: Mater. Sci. Eng. A, 2017, vol. 702, pp. 425–37.10.1016/j.msea.2017.07.028 ↗
28. W. HE, C. LI, B. LUAN, R. QIU, K. WANG, Z. LI, and Q. LIU: Trans. Nonferrous Met. Soc. China, 2015, vol. 25, pp. 3578–84.10.1016/S1003-6326(15)63997-8 ↗
29. G. Fan, H. Huang, Z. Tan, D. Xiong, Q. Guo, M. Naito, Z. Li, and D. Zhang: Mater. Sci. Eng. A, 2017, vol. 708, pp. 537–43.10.1016/j.msea.2017.10.031 ↗
30. H. Huang, G. Fan, Z. Tan, D.-B. Xiong, Q. Guo, C. Guo, Z. Li, and D. Zhang: Mater. Sci. Eng. A, 2017, vol. 699, pp. 55–61.10.1016/j.msea.2017.05.074 ↗
31. M.S. Mohebbi, A. Akbarzadeh, B.H. Kim, and S.-K. Kim: Metall. Mater. Trans. A, 2014, vol. 45, pp. 5442–50.10.1007/s11661-014-2534-4 ↗
32. J.M. Wheeler, V. Maier, K. Durst, M. Göken, and J. Michler: Mater. Sci. Eng. A, 2013, vol. 585, pp. 108–13.10.1016/j.msea.2013.07.033 ↗
33. H. Miyamoto, K. Ota, and T. Mimaki: Scr. Mater., 2006, vol. 54, pp. 1721–5.10.1016/j.scriptamat.2006.02.016 ↗
34. T. Zhu, J. Li, A. Samanta, H.G. Kim, and S. Suresh: Proc. Natl. Acad. Sci., 2007, vol. 104, pp. 3031–6.10.1073/pnas.0611097104 ↗
35. A.C. Leff, C.R. Weinberger, and M.L. Taheri: Ultramicroscopy, 2015, vol. 153, pp. 9–21.10.1016/j.ultramic.2015.02.002 ↗
36. B. Beausir, C. Fressengeas, J. Fundenberger: Université de Lorraine - Metz, ATOM–Analysis Tools for Orientation Maps, http://atom-software.edu. 2015.
37. R. Xu, G. Fan, Z. Tan, G. Ji, C. Chen, B. Beausir, D.-B. Xiong, Q. Guo, C. Guo, Z. Li, and D. Zhang: Mater. Res. Lett., 2018, vol. 6, pp. 113–20.10.1080/21663831.2017.1405371 ↗
38. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
39. H. Adachi, Y. Miyajima, M. Sato, and N. Tsuji: Mater. Trans., 2015, vol. 56, pp. 671–8.10.2320/matertrans.L-M2015803 ↗
40. G. Dirras, J. Gubicza, D. Tingaud, and S. Billard: Mater. Chem. Phys., 2011, vol. 129, pp. 846–52.10.1016/j.matchemphys.2011.05.022 ↗
41. H.A. Wriedt: Bull. Alloy Phase Diagrams, 1985, vol. 6, pp. 548–53.10.1007/BF02887157 ↗
42. L. Yan, Z. Tan, G. Ji, Z. Li, G. Fan, D. Schryvers, A. Shan, and D. Zhang: Mater. Charact., 2016, vol. 112, pp. 213–8.10.1016/j.matchar.2015.12.031 ↗
43. Y.M. Wang, A. V Hamza, and E. Ma: Acta Mater., 2006, vol. 54, pp. 2715–26.10.1016/j.actamat.2006.02.013 ↗
44. Q. Wei: J. Mater. Sci., 2007, vol. 42, pp. 1709–27.10.1007/s10853-006-0700-9 ↗
45. J. May, H.W. Höppel, and M. Göken: Scr. Mater., 2005, vol. 53, pp. 189–94.10.1016/j.scriptamat.2005.03.043 ↗
46. C. Duhamel, Y. Brechet, and Y. Champion: Int. J. Plast., 2010, vol. 26, pp. 747–57.10.1016/j.ijplas.2009.10.003 ↗
47. R.W. Hayes, D. Witkin, F. Zhou, and E.J. Lavernia: Acta Mater., 2004, vol. 52, pp. 4259–71.10.1016/j.actamat.2004.05.042 ↗
48. T. Suo, Y. Chen, Y. Li, C. Wang, and X. Fan: Mater. Sci. Eng. A, 2013, vol. 560, pp. 545–51.10.1016/j.msea.2012.09.100 ↗
49. G.A. Malygin: Phys. Solid State, 2007, vol. 49, pp. 2266–73.10.1134/S1063783407120098 ↗
50. A. Misra, J.P. Hirth, and R.G. Hoagland: Acta Mater., 2005, vol. 53, pp. 4817–24.10.1016/j.actamat.2005.06.025 ↗
51. A Azarniya, SM Safavi, S Sovizi, A Azarniya, B Chen, RH MadaahHosseini, S Ramakrishna: Metals (Basel), 2017, vol. 7, p. 384.10.3390/met7100384 ↗
52. S. Dong, J. Zhou, D. Hui, Y. Wang, and S. Zhang: Compos. Part A Appl. Sci. Manuf., 2015, vol. 68, pp. 356–64.10.1016/j.compositesa.2014.10.018 ↗
53. Y. Liu, J. Zhou, and D. Hui: Compos. Part B Eng., 2012, vol. 43, pp. 249–54.10.1016/j.compositesb.2011.11.048 ↗
54. L. Ceschini, A. Dahle, M. Gupta, A.E.W. Jarfors, S. Jayalakshmi, A. Morri, F. Rotundo, and S. Toschi: Aluminum and Magnesium Metal Matrix Nanocomposites, Springer, Singapore, 2017, pp.2–3.10.1007/978-981-10-2681-2 ↗
55. L. Blaz, P. Lobry, M. Zygmunt-Kiper, J. Koziel, G. Wloch, and S. Dymek: J. Alloys Compd., 2015, vol. 619, pp. 652–8.10.1016/j.jallcom.2014.09.013 ↗
56. P.-C. Ma, N.A. Siddiqui, G. Marom, and J.-K. Kim: Compos. Part A Appl. Sci. Manuf., 2010, vol. 41, pp. 1345–67.10.1016/j.compositesa.2010.07.003 ↗
57. Z.Y. Liu, B.L. Xiao, W.G. Wang, and Z.Y. Ma: Compos. Part A Appl. Sci. Manuf., 2017, vol. 94, pp. 189–98.10.1016/j.compositesa.2016.11.029 ↗