Quench Sensitivity in a Dispersoid-Containing Al-Mg-Si Alloy
Source abstract
Abstract
The quench sensitivity of a 6000 series alloy with a high content of dispersoids was studied over a wide range of cooling rate and natural-aging (NA) time. Positron annihilation lifetime spectroscopy, differential scanning calorimetry, and transmission electron microscopy were used to characterize the clustering and precipitation reactions. The alloy showed significant quench sensitivity after short NA (2 and 30 minutes), but the quench sensitivity was lower after long NA (24 hours). The quench sensitivity after the long NA can be accounted for by the solute loss due to the formation of nonhardening β′ precipitates on the dispersoids during cooling from solution treatment. For short NA, however, quenched-in vacancies and modifications to the precipitation sequence also have substantial contributions to the quench sensitivity. The current study provides new insight into the quench sensitivity of 6000 series alloys that contain a high dispersoid density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. 1. M.J. Starink, B. Milkereit, Y. Zhang, and P.A. Rometsch: Mater. Design, 2015. vol. 88, pp. 958-971.10.1016/j.matdes.2015.09.058 ↗
2. H. Zoller and A. Ried: Zeitschrift Metallkunde, 1971. vol. 62(5), pp. 354–58.
3. 3. B. Milkereit and M.J. Starink: Mater. Design, 2015. vol. 76, pp. 117-129.10.1016/j.matdes.2015.03.055 ↗
4. 4. H. Westengen, L. Auran, and O. Reiso: Aluminium Dusseldorf, 1980. vol. 57(12), pp. 768-775.
5. 5. L. Lodgaard and N. Ryum: Mater. Sci. Eng. A, 2000. vol. 283(1), pp. 144-152.10.1016/S0921-5093(00)00734-6 ↗
6. 6. H. Hirasawa: Scripta Metallurgica, 1975. vol. 9(9), pp. 955-958.10.1016/0036-9748(75)90551-7 ↗
7. 7. J.A. Österreicher, M. Kumar, A. Schiffl, S. Schwarz, and G.R. Bourret: Mater. Sci. Eng. A, 2017. vol. 687, pp. 175-180.10.1016/j.msea.2017.01.074 ↗
8. 8. H. Zhan and B. Hu: Mater. Char., 2018. vol. 142, pp. 602-612.10.1016/j.matchar.2018.06.026 ↗
9. 9. K. Buchanan, J. Ribis, J. Garnier, and K. Colas: Philosophical Magazine Letters, 2016. vol. 96(4), pp. 121-131.10.1080/09500839.2016.1162911 ↗
10. 10. D.H. Bratland, O. Grong, H. Shercliff, O.R. Myhr, and S. Tjotta: Acta Mater., 1997. vol. 45(1), pp. 1-22.10.1016/S1359-6454(96)00100-0 ↗
11. 11. K. Strobel, M.A. Easton, L. Sweet, M.J. Couper, and J.-F. Nie: Mater. Trans., 2011. vol. 52(5), pp. 914-919.10.2320/matertrans.L-MZ201111 ↗
12. 12. L. Lodgaard and N. Ryum: Aluminum Transactions, 2000. vol. 2(2), pp. 267-275.
13. 13. L. Lodgaard and N. Ryum: Mater. Sci. Tech., 2000. vol. 16(6), pp. 599-604.10.1179/026708300101508315 ↗
14. 14. L. Lodgaard and N. Ryum: Mater. Sci. Forum, 2000. vol. 331-337, pp. 945-950.10.4028/www.scientific.net/MSF.331-337.945 ↗
15. 15. C.L. Liu, Q. Du, N. Parson, and W.J. Poole: Scripta Mater., 2018. vol. 152, pp. 59-63.10.1016/j.scriptamat.2018.04.012 ↗
16. J.E. Yoo, A. Shan, I.G. Moon, and S.J. Maeng: J. Mater. Sci., 1999. vol. 34(11), pp. 2679–83.10.1023/A:1004673321013 ↗
17. H. Bomas: Die Abschreckempfindlichkeit von manganhaltigen AlMgSi-Legierungen. Fortschritt-Berichte der VDI-Zeitschriften, Reihe 5: Grund- und Werkstoffe, VDI-Verlag, Düsseldorf, 1980, vol. 47, p. 5.
18. I. Musulin and O.C. Celliers: Light Met. 1990, Minerals, Metals and Materials Soc (TMS), 1990, pp. 951–54.
19. 19. O. Lohne and A.L. Dons: Scand. J. Metall., 1983. vol. 12(1), pp. 34-36.
20. 20. M.S. Remøe, K. Marthinsen, I. Westermann, K. Pederson, J. Røyset, and C. Marioara: Mater. Sci. Eng. A, 2017. vol. 693, pp. 60-72.10.1016/j.msea.2017.03.078 ↗
21. 21. C. Flament, J. Ribis, J. Garnier, T. Vandenberghe, J. Henry, and A. Deschamps: Philos. Mag., 2015. vol. 95(8), pp. 906-917.10.1080/14786435.2015.1009959 ↗
22. 22. K. Strobel, M.D.H. Lay, M.A. Easton, L. Sweet, S. Zhu, N. Parson, and A.J. Hill: Materials Characterization, 2016. vol. 111, pp. 43-52.10.1016/j.matchar.2015.11.009 ↗
23. 23. J.W. Evancho and J.T. Staley: Metall. Trans., 1974. vol. 5(1), pp. 43-47.10.1007/BF02642924 ↗
24. 24. D.W. Pashley, M.H. Jacobs, and J.T. Vietz: Philos. Mag., 1967. vol. 16, pp. 51-76.10.1080/14786436708229257 ↗
25. 25. A. Falahati, P. Lang, and E. Kozeschnik: Mater. Sci. Forum, 2012. vol. 706-709, pp. 317-322.10.4028/www.scientific.net/MSF.706-709.317 ↗
26. 26. A. Deschamps, G. Texier, S. Ringeval, and L. Delfaut-Durut: Mater. Sci. Eng. A, 2009. vol. 501(1-2), pp. 133-139.10.1016/j.msea.2008.09.067 ↗
27. P. Lang, A. Falahati, M.R. Ahmadi, P. Warczok, E. Povoden-Karadeniz, E. Kozeschnik, and R. Radis: Phase Stability, Diffusion, Kinetics and Their Applications, 2011, pp. 284–91.
28. 28. M. Werinos, H. Antrekowitsch, T. Ebner, R. Prillhofer, P. Uggowitzer, and S. Pogatscher: Mater. Design, 2016. vol. 107, pp. 257-268.10.1016/j.matdes.2016.06.014 ↗
29. 29. M. Werinos, H. Antrekowitsch, E. Kozeschnik, T. Ebner, F. Moszner, J.F. Löffler, P. Uggowitzer, and S. Pogatscher: Scripta Mater., 2016. vol. 112, pp. 148-151.10.1016/j.scriptamat.2015.09.037 ↗
30. 30. S. Pogatscher, H. Antrekowitsch, M. Werinos, F. Moszner, S. Gerstl, M.F. Francis, W.A. Curtin, J.F. Löffler, and P. Uggowitzer: Phys. Rev. Letters, 2014. vol. 112, pp. 225701.10.1103/PhysRevLett.112.225701 ↗
31. 31. F.D. Fischer, J. Svoboda, F. Appel, and E. Kozeschnik: Acta Mater., 2011. vol. 59(9), pp. 3463-3472.10.1016/j.actamat.2011.02.020 ↗
32. 32. B. Klobes, T.E.M. Staab, M. Haaks, K. Maierand, and I. Wieler: Physica Status Solidi - Rapid Research Letters, 2008. vol. 2(5), pp. 224-226.10.1002/pssr.200802123 ↗
33. 33. S. Pogatscher, H. Antrekowitsch, H. Leitner, T. Ebner, and P.J. Uggowitzer: Acta Mater., 2011. vol. 59(9), pp. 3352-3363.10.1016/j.actamat.2011.02.010 ↗
34. 34. H.S. Zurob and H. Seyedrezai: Scripta Mater., 2009. vol. 61(2), pp. 141-144.10.1016/j.scriptamat.2009.03.025 ↗
35. 35. R.C. Picu and X. Zhijie: Scripta Mater., 2007. vol. 57(1), pp. 45-48.10.1016/j.scriptamat.2007.03.014 ↗
36. D.A. Porter, K.E. Easterling, and M.Y. Sherif: Phase transformations in matals and alloys. 3rd ed. 2009: CRC Press,
37. 37. C. Wolverton: Acta Mater., 2007. vol. 55(17), pp. 5867-5872.10.1016/j.actamat.2007.06.039 ↗
38. 38. H. Seyedrezai, D. Grebennikov, P. Mascher, and H.S. Zurob: Mater. Sci. Eng. A, 2009. vol. 525(1-2), pp. 186-191.10.1016/j.msea.2009.06.054 ↗
39. 39. S. Esmaeili, D. Vaumousse, M.W. Zandbergen, W.J. Poole, A. Cerezo, and D.J. Lloyd: Philos. Mag., 2007. vol. 87(25), pp. 3797-3816.10.1080/14786430701408312 ↗
40. A. Falahati, M.R. Ahmadi, P. Warczok, P. Lang, E. Povoden-Karadeniz, and E. Kozeschnik: Phase Stability, Diffusion, Kinetics and Their Applications, 2011, pp. 292–99.
41. 41. S. Pogatscher, E. Kozeschnik, H. Antrekowitsch, M. Werinos, S. Gerstl, J.F. Löffler, and P. Uggowitzer: Scripta Mater., 2014. vol. 89, pp. 53-56.10.1016/j.scriptamat.2014.06.025 ↗
42. P. Dumitraschkewitz, S. Gerstl, L. Stephenson, P. Uggowitzer, and S. Pogatscher: Adv. Eng. Mater., 2018. vol., pp. 1800255.10.1002/adem.201800255 ↗
43. 43. J. Banhart, M. Liu, Y. Yong, Z. Liang, C.S.T. Chang, M. Elsayed, and M.D.H. Lay: Physica B: Condensed Matter, 2012. vol. 407(14), pp. 2689-2696.10.1016/j.physb.2012.03.028 ↗
44. M.D.H. Lay, H.S. Zurob, C.R. Hutchinson, T.J. Bastow, and A.J. Hill: Metall. Mater. Trans. A, 2012. vol. 43A, pp. 4507-13.10.1007/s11661-012-1257-7 ↗
45. 45. J.F. Nie, B.C. Muddle, H.I. Aaronson, S.P. Ringer, and J.P. Hirth: Metall. Mater. Trans. A, 2002. vol. 33A(6), pp. 1649-1658.10.1007/s11661-002-0174-6 ↗
46. 46. H.W. Zandbergen, S.J. Andersen, and J. Jansen: Science, 1997. vol. 277(5330), pp. 1221-1225.10.1126/science.277.5330.1221 ↗
47. 47. S.J. Andersen, H.W. Zandbergen, J. Jansen, C. Traeholt, U. Tundal, and O. Reiso: Acta Mater., 1998. vol. 46(9), pp. 3283-3298.10.1016/S1359-6454(97)00493-X ↗
48. 48. K. Matsuda, S. Ikeno, and S. Tada: J. Jpn. Inst. Met., 1993. vol. 57(10), pp. 1107-1113.10.2320/jinstmet1952.57.10_1107 ↗
49. 49. M.H. Jacobs: Philos. Mag., 1972. vol. 26(1), pp. 1-13.10.1080/14786437208221015 ↗
50. 50. R. Vissers, M.A. van Huis, J. Jansen, H.W. Zandbergen, C.D. Marioara, and S.J. Andersen: Acta Mater., 2007. vol. 55(11), pp. 3815-3823.10.1016/j.actamat.2007.02.032 ↗
51. 51. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998. vol. 46, pp. 3893-3904.10.1016/S1359-6454(98)00059-7 ↗
52. T. Saito, E.A. Mørtsell, S. Wenner, C.D. Marioara, S.J. Andersen, J. Friis, K. Matsuda, and R. Holmestad: Adv. Engng. Mater., 2018. vol. 20(7), pp. 1800125.10.1002/adem.201800125 ↗
53. 53. K. Matsuda, V. Sakaguchi, V. Miyata, V. Uetani, T. Sato, A. Kamio, and S. Ikeno: J. Mater. Sci., 2000. vol. 35(1), pp. 179-189.10.1023/A:1004769305736 ↗
54. 54. S. Wenner, L. Jones, C.D. Marioara, and R. Holmestad: Micron, 2017. vol. 96, pp. 103-111.10.1016/j.micron.2017.02.007 ↗
55. 55. M.J. Starink: International Materials Reviews, 2004. vol. 49(3-4), pp. 191-226.10.1179/095066004225010532 ↗
56. J.M. Zuo and J.C. Mabon: Microsc. Microanal., 2004, vol. 10, pp. 1000–110.1017/S1431927604884319 ↗
57. 57. R. Ferragut, A. Somoza, and A. Dupasquier: Journal of Physics: Condensed Matter, 1998. vol. 10(17), pp. 3903-3918.10.1088/0953-8984/10/17/019 ↗
58. 58. G. Dlubek: Material Science Forum, 1987. vol. 13-14, pp. 11-32.10.4028/www.scientific.net/MSF.13-14.11 ↗
59. J. Banhart, M.D.H. Lay, C.S.T. Chang, and A.J. Hill: Phys. Rev. B: Condens. Matter, 2011. vol. 83(1), pp. 014101.10.1103/PhysRevB.83.014101 ↗
60. A. Somoza, A. Dupasquier, I.J. Polmear, P. Folegati, and R. Ferragut: Physical Review B (Condensed Matter), 2000. vol. 61(21), pp. 14454.10.1103/PhysRevB.61.14454 ↗
61. 61. J. Royset, T. Stene, J.A. Saeter, and O. Reiso: Mater. Sci. Forum, 2006. vol. 519-521, pp. 239-244.10.4028/www.scientific.net/MSF.519-521.239 ↗
62. 62. D.W. Pashley, J.W. Rhodes, and A. Sendorek: J. Inst. Metals, 1966. vol. 94, pp. 41-49.
63. 63. A. Poznak, V. Thole, and P. Sanders: Metals, 2018. vol. 8, pp. 309.10.3390/met8050309 ↗
64. B. Milkereit, in Fakultät für Maschinenbau und Schiffstechnik. 2010, Universität Rostock: Rostock. pp. 178.
65. 65. M.J. Starink: Thermochim Acta, 2003. vol. 404, pp. 163-176.10.1016/S0040-6031(03)00144-8 ↗
66. M.J. Starink: J. Alloys Compd., 2007. vol. 433(1-2), pp. 4-6.10.1016/j.jallcom.2006.06.069 ↗
67. 67. A. Dupasquier, G. Kogel, and A. Somoza: Acta Mater., 2004. vol. 52(16), pp. 4707-4726.10.1016/j.actamat.2004.07.004 ↗
68. 68. T.E.M. Staab, B. Klobes, I. Kohlbach, B. Korff, M. Haaks, E. Dudzik, and K. Maier: J. Phys: Conf. Series, 2011. vol. 265, pp. 012108.10.1088/1742-6596/265/1/012018 ↗
69. J.M. Campillo Robles, E. Ogando, and F. Plazaola: Int. Workshop Positron Stud. Defects, IOP Publishing Ltd., 2011, pp. 1–10.
70. 70. J. Banhart, C.S.T. Chang, Z. Liang, N. Wanderka, M.D.H. Lay, and A.J. Hill: Adv. Engng. Mater., 2010. vol. 12(7), pp. 559-571.10.1002/adem.201000041 ↗
71. 71. C.S.T. Chang and J. Banhart: Metall. Mater. Trans. A, 2010. vol. 42(7), pp. 1960-1964.
72. 72. B. Milkereit, N. Wanderka, C. Schick, and O. Kessler: Mater. Sci. Eng. A, 2012. vol. 550, pp. 87-96.10.1016/j.msea.2012.04.033 ↗
73. J.T. Staley: Mater. Sci. Tech., 1987. vol. 3(11), pp. 923–35.10.1179/mst.1987.3.11.923 ↗
74. 74. C.S.T. Chang, I. Wieler, N. Wanderka, and J. Banhart: Ultramicroscopy, 2009. vol. 109(5), pp. 585-592.10.1016/j.ultramic.2008.12.002 ↗
75. 75. A. Serizawa, S. Hirosawa, and T. Sato: Metall. Mater. Trans. A, 2008. vol. 39(2), pp. 243-251.10.1007/s11661-007-9438-5 ↗
76. 76. M. Murayama and K. Hono: Acta Mater., 1999. vol. 47(5), pp. 1537-1548.10.1016/S1359-6454(99)00033-6 ↗
77. 77. Y.X. Lai, B.C. Jiang, C.H. Liu, Z.K. Chen, C.L. Wu, and J.H. Chen: J. Alloys Compd., 2017. vol. 701, pp. 94-98.10.1016/j.jallcom.2017.01.095 ↗