Microstructure Solidification Maps for Al-10 Wt Pct Si Alloys
Source abstract
Abstract
Hypo-eutectic Al-Si alloys are widely used in both the automotive and aerospace industries; however, they still have limited usage as structural materials, due to the inherent morphology of the Si phase that forms within the eutectic structure. This non-ideal Si morphology can be modified, via alloy additions and/or rapid solidification (RS), but the underlying mechanism(s) behind this is poorly understood. This work focused on understanding the influence of RS on the eutectic structure, for hypo-eutectic Al-10 wt pct Si alloys produced by Impulse Atomization and Differential Scanning Calorimetry. This study found that the eutectic Si forms into four distinct morphologies: (1) flaky, (2) fibrous, (3) globular + fibrous and (4) globular, depending on the solidification conditions. As a result, two solidification maps of the Si morphology are proposed, one based on local eutectic solidification conditions and another based on a solidification continuous cooling diagram (SCCT). Both maps help identify the required conditions for certain Si morphologies to form. Hardness measurements were also carried out and it was found that the Si morphology would influence the alloy hardness, with the highest value being achieved when the eutectic Si was globular. This result indicates that the Si morphology is an important factor that can alter the mechanical properties of hypo-eutectic Al-Si alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Z. Li, A. Samuel, F. Samuel, C. Ravindran, S. Valtierra and H. Doty, Materials Science and Engineering A, 2004, vol. 367, pp. 96-110.10.1016/j.msea.2003.09.090 ↗
2. F. Robles-Hernandez, J. Ramirez and R. Mackay, Al-Si Alloys: Automotive, Aeronautical and Aerospace Applications, Springer, 2017.10.1007/978-3-319-58380-8 ↗
3. T. Hosch, L. England and R. Napolitano, Journal of Materials Science, 2009, vol. 44, pp. 4892-4899.10.1007/s10853-009-3747-6 ↗
4. S. Lu and A. Hellawell, Metallurgical Transactions A, 1987, vol. 18, no. 10, pp. 1721-1733.10.1007/BF02646204 ↗
5. A. Mazahery and M. Shabani, JOM, 2014, vol. 66, no. 5, pp. 726-738.10.1007/s11837-014-0968-1 ↗
6. N. Rathod and J. Manghani, International Journal of Emergin Trends in Engineering and Development, 2012, vol. 5, pp. 574-582.
7. S. Hegde and K. Prabhu, Journal of Materials Science, 2008, vol. 43, pp. 3009-27.10.1007/s10853-008-2505-5 ↗
8. M. Makhlouf and H. Guthy, Journal of Light Metals, 2001, vol. 1, pp. 199-218.10.1016/S1471-5317(02)00003-2 ↗
9. A. Hellawell, Progress in Materials Science, 1970, vol. 15, pp. 1-78.10.1016/0079-6425(70)90001-0 ↗
10. S. Khan and R. Elliott, Journal of Materials Science, 1996, vol. 31, no. 14, pp. 3731-3737.10.1007/BF00352787 ↗
11. R. Trivedi, F. Jin and I. Anderson, Acta Materialia, 2003, vol. 51, pp. 289-300.10.1016/S1359-6454(02)00226-4 ↗
12. Y. Kalay, L. Chumley, I. Anderson and R. Napolitano, Metall. Mater. Trans. A, 2007, vol. 38, pp. 1452-57.10.1007/s11661-007-9168-8 ↗
13. M. Pierantoni, M. Gremaud, P. Magnin, D. Stoll and W. Kurz, Acta Metallurgica et Materialia, 1992, vol. 40, no. 7, pp. 1637-1644.10.1016/0956-7151(92)90106-O ↗
14. J. Wiskel, H. Henein and E. Maire, Canadian Metallurgical Quarterly, 2002, vol. 41, no. 1, pp. 97-110.10.1179/cmq.2002.41.1.97 ↗
15. A.-A. Bogno, J. Valloton, H. Henein, D. Ivey, A. Locock and M. Gallerneault, Canadian Metallurgical Quarterly, 2018, vol. 57, no. 2, pp. 148-159.10.1080/00084433.2017.1403106 ↗
16. M. Gunduz and E. Cadirli, Materials Science & Engineering A, 2002, vol. 327, pp. 167-185.10.1016/S0921-5093(01)01649-5 ↗
17. M. Gunduz, H. Kaya, E. Cadirli and A. Ozmen, Materials Science and Engineering, 2004, vol. 369, pp. 215-29.10.1016/j.msea.2003.11.020 ↗
18. K. Jackson and J. Hunt, Trans. Am. Inst. Min. Engineers, 1966, vol. 236, p. 1129.
19. J. Wiskel, K. Navel, H. Henein and E. Marie, Canadian Metallurgical Quarterly, 2002, vol. 41, no. 2, pp. 193-204.10.1179/cmq.2002.41.2.193 ↗
20. J. Dantzig and M. Rappaz, Solidification, Boca Raton: CRC Press, 2009.10.1201/9781439808030 ↗
21. C. Levi and R. Mehrabian, Metallurgical Transactions A, 1982, vol. 13A, pp. 13-23.10.1007/BF02642411 ↗
22. A. L. Genau, Iowa State University, Ames, Iowa, 2004.
23. H. Petersen: Report No. 224, Danish Atomic Energy Commission, Riso, 1970, pp. 6–7.
24. C. Caceres, C. Davidson, J. Griffiths and Q. Wang, Met. and Mat. Transactions A, 1999, vol. 30A, pp. 2611-2618.10.1007/s11661-999-0301-8 ↗
25. K. Oswalt and M. Misra, AFS Transactions, 1980, vol. 88, pp. 845-862.
26. P. Anyalebechi, T. Rouns, and R. Sanders: in Light Metals 1991, TMS 1990, pp. 821–50.
27. A.-A. Bogno, P. D. Khatibi, H. Henein and C.-A. Gandin, Metallurgical and Materials Transactions A, 2016, vol. 47A, pp. 4606-4615.10.1007/s11661-016-3594-4 ↗
28. W. Prukkanon, N. Srisukhumbowornchai and C. Limmaneevichitr, Jornal of Alloys and Compounds, 2009, vol. 477, pp. 454-460.10.1016/j.jallcom.2008.10.016 ↗
29. H. Jones: in Rapid Solidification of Metals and Alloys, The Institution of Metallurgists, London, 1983, pp. 40–43.
30. P. Anyalebechi, TMS, 2004, pp. 217-33.
31. G. Armstrong and H. Jones, Solidification and Casting of Metals, London: Metals Society, 1979.
32. R. Grugel and W. Kurz, Metallurgical Transactions A, 1987, vol. 18, pp. 1137-1142.10.1007/BF02668564 ↗
33. P. Magnin, J. Mason and R. Trivedi, Acta Metallurgica et Materialia, 1991, vol. 39, no. 4, pp. 469-480.10.1016/0956-7151(91)90115-H ↗
34. A. Garcia, T. Clyne and M. Prates, Metallurgical Transactions B, 1979, vol. 10B, pp. 85-92.10.1007/BF02653977 ↗
35. J. Spinelli, A.-A. Bogno and H. Henein, Metallurgical and Materials Transactions A, 2018, vol. 49, no. 2, pp. 550-562.10.1007/s11661-017-4432-z ↗
36. Z. Zhang, X. Bian, Y. Wang and X. Liu, Transactions of Nonferrous Metals Society of China, 2001, vol. 11, no. 3, pp. 374-377.
37. R. Retes, T. Bello, R. Kakitani, T. Costa, A. Garcia, N. Cheung and J. Spinelli, Materials Science and Engineering A, 2017, vol. 685, pp. 235-243.10.1016/j.msea.2016.12.096 ↗
38. J. Spinelli, W. Hearn, A.-A. Bogno, and H. Henein: in Light Metals 2018, TMS, 2018, pp. 381–87.10.1007/978-3-319-72284-9_51 ↗
39. W. D. Callister Jr. and D. G. Rethwisch, Fundamentals of Materials Science and Engineering: An Integrated Approach, Hoboken: John Wiley & Sons, 2008.