Small Fatigue Crack Growth Mechanisms and Interfacial Stability in Cold-Spray 6061 Aluminum Alloys and Coatings
Source abstract
Abstract
Abstract Cold-spray-processed aluminum alloys have static mechanical properties superior to those of aerospace cast alloys, and similar to those of their wrought counterparts, making them good candidates for structural applications. However, their broad and confident use relies upon systematic fatigue crack growth studies to investigate and demonstrate the materials’ performance in critical high-integrity components. In this work, the fatigue crack growth behavior in early stages (small crack growth regime) was investigated for cold-spray processed 6061 aluminum alloys and coatings, at stress ratio R = 0.1, in room temperature laboratory air. The effects of the characteristic microstructure and initial flaw size on the fatigue crack growth response were systematically examined, and the crack growth mechanisms at the microstructural scale were established and compared to those of long cracks. The mechanical interfacial stability of coatings was examined in cold-spray 6061–rolled 6061-T6 couples. An original method of quantifying the deposition–substrate interfacial strength, and correlating it to the response under cyclic loading via crack-interface stability maps, was developed. The proposed methodology is based on combined scratch testing and fracture mechanics formulations, and failure at the coating–substrate interface can be predicted for any crack growth scenario under cyclic loading. The method can be broadly used for the design and optimization of cold-spray and other coatings, as well as in structural repair.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. A. Papyrin: Adv. Mater. Processes, 2001, vol. 159, pp. 49-51.
2. V. Champagne and D. Helfritch: Int. Mater. Rev., 2016, vol. 61, pp. 437-55.10.1080/09506608.2016.1194948 ↗
3. A.J.G. Lunt, N. Baimpas, E. Salvati, I.P. Dolbnya, T. Sui, S. Ying, H. Zhang, A.K. Kleppe, J. Dluhos and A.M. Korsunsky: J. Strain Anal., 2015, vol. 50, pp. 426-44.10.1177/0309324715596700 ↗
4. V. Champagne, D. Helfritch, P. Leyman, R. Lempicki and S. Grendahl: Modell. Simul. Mater. Sci. Eng., 2005, vol. 13, pp. 1119-28.10.1088/0965-0393/13/7/008 ↗
5. H. Assadi, F. Gartner, T. Stoltenhoff and H. Kreye: Acta Mater., 2003, vol. 51, pp. 4379-4394.10.1016/S1359-6454(03)00274-X ↗
6. M. Grujicic, C. Zhao, W. DeRosset and D. Helfritch: Mater. Des., 2004, vol. 25, pp. 681-688.10.1016/j.matdes.2004.03.008 ↗
7. V. Champagne, D. Helfritch, S. Dinavahi and P. Leyman: J. Therm. Spray Technol., 2011, vol. 20, pp.425-431.10.1007/s11666-010-9530-z ↗
8. F. Raletz, M. Vardelle and G. Ezo’o: Surf. Coat. Technol., 2006, vol. 201, pp. 1942-1947.10.1016/j.surfcoat.2006.04.061 ↗
9. M. Grujicic, J. Saylor, D. Beasley, W. Derosset and D. Helfritch: Appl. Surf. Sci., 2003, vol. 219, pp. 211-227.10.1016/S0169-4332(03)00643-3 ↗
10. T. Hussain, D.G. McCartney, P.H. Shipway and D. Zhang: J. Therm. Spray Technol., 2009, vol. 18, pp. 364-379.10.1007/s11666-009-9298-1 ↗
11. T. Schmidt, F. Gartner, H. Assadi and H. Kreye: Acta Mater., 2006, vol. 54, pp. 729-742.10.1016/j.actamat.2005.10.005 ↗
12. V. Champagne: The Cold Spray Materials Deposition Process: Fundamentals and Applications, 1st ed., Woodhead Publishing Limited, Cambridge, U.K., 2007.
13. P. Cavaliere and A. Silvello: Int. J. Adv. Manuf. Technol., 2015, vol. 81, pp. 1857-1862.10.1007/s00170-015-7365-y ↗
14. E Sansoucy, GE Kim, AL Moran and B Jodoin: J. Therm. Spray Technol., 2007, vol. 16, pp. 651-660.10.1007/s11666-007-9099-3 ↗
15. G Kim, B Jodoin, and E Sansoucy: Patent Application No. PCT/CA2007/001967, 2008
16. R. Ghelichi, D. MacDonald, S. Bagherifard, H. Jahed, M. Guagliano and B. Jodoin: Acta Mater., 2012, vol. 60, pp. 6555-6561.10.1016/j.actamat.2012.08.020 ↗
17. R. Ghelichi, S. Bagherifard, D. MacDonald, M. Brochu, H. Jahed, B. Jodoin and M. Guagliano: Int. J. Fatigue, 2014, vol. 65, pp. 51-57.10.1016/j.ijfatigue.2013.09.001 ↗
18. A. Moridi, S.M. Hassani-Gangaraj, S. Vezzú, L. Trško and M. Guagliano: Surf. Coat. Technol., 2015, vol. 283, pp. 247-254.10.1016/j.surfcoat.2015.10.063 ↗
19. W Sun, A Wei Yee Tan, N Win Khun, I Marinescu and E Liu: Surf. Coat. Technol., 2016, vol. 320, pp. 452-457.10.1016/j.surfcoat.2016.11.093 ↗
20. S. Suresh and R.O. Ritchie: Int. Met. Rev., 1984, vol. 29, pp. 445-475.
21. R.O. Ritchie and J. Lankford: Mater. Sci. Eng., 1986, vol. 84, pp. 11-16.10.1016/0025-5416(86)90217-X ↗
22. D.A. Lados, D. Apelian, P. Paris and J. Donald: Int. J. Fatigue, 2005, vol. 27, pp. 1463-1472.10.1016/j.ijfatigue.2005.06.013 ↗
23. D.A. Lados, D. Apelian and J.K. Donald: Acta Mater., 2006, vol. 54, pp. 1475-1486.10.1016/j.actamat.2005.11.019 ↗
24. A Gavras, D.A. Lados, V Champagne and R.J. Warren: Int. J. Fatigue, 2018, vol. 110, pp. 49-62.10.1016/j.ijfatigue.2018.01.006 ↗
25. T. Schmidt, H. Assadi, F. Gartner, H. Richter, T. Stoltenhoff, H. Kreye and T. Klassen: J. Therm. Spray Technol., 2009, vol. 18, pp. 794-808.10.1007/s11666-009-9357-7 ↗
26. F. Gartner, C. Borchers, T. Stoltenhoff, H. Kreye, and H. Assadi: Therm. Spray 2003, Proc. Int. Therm. Spray Conf., 2003, vol. 2, pp. 1–8.10.31399/asm.cp.itsc2003p0001 ↗
27. ASTM Standard E112-12: Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, 2012.
28. R.A. Jeniski Jr.: Mater. Sci. Eng. A, 1997, vol. 237, pp. 52-64.10.1016/S0921-5093(97)00116-0 ↗
29. D. Belsito, B. McNally, L. Bassett, V. Champagne, and R. Sisson: Materials Science and Technology Conference and Exhibition 2013 (MS&T’13), 2013, vol. 1, pp. 1729–36.
30. ASTM Standard E384-11: Standard Test Method for Knoop and Vickers Hardness of Materials, ASTM International, West Conshohocken, 2011.
31. ASTM Standard E8M-16a: Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, 2016.
32. ASTM Standard E647-15: Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM International, West Conshohocken, 2015.
33. A.K. Vasudeven: Mater. Sci. Eng. A, 1994, vol. 188, pp. 1-22.10.1016/0921-5093(94)90351-4 ↗
34. ASTM Standard STP 486: Damage Tolerance in Aircraft Structures, ASTM International, West Conshohocken, 1971, pp. 230–42.
35. K. Donald: Int. J. Fatigue, 1997, vol. 19, pp. 191-195.10.1016/S0142-1123(97)00024-8 ↗
36. K. Donald: Fatigue Fract. Mechs., 1999, vol. 29, pp. 674-695.
37. ASTM Standard C1624-05: Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing, ASTM International, West Conshohocken, 2015.
38. ASTM Standard E3-11: Standard Guide for Preparation of Metallographic Specimens, ASTM International, West Conshohocken, 2017.
39. Buehler, an ITW Company: Buehler® SumMet TM : The Sum of Our Experience: A Guide to Materials Preparation and Analysis, 2nd ed., Buehler, an ITW Company, Lake Bluff, 2013.
40. ASTM Standard C633-13: Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings, ASTM International, West Conshohocken, 2017.
41. Miltary Specification MIL J-24445A: Joint, Bimetallic Bonded, Aluminum to Steel, U.S. Department of Defense, Washington, 1977.
42. ASTM Standard E2338-11: Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards, ASTM International, West Conshohocken, 2011.
43. K Pappacena, D Singh, O Ajayi, J Routbort, O Erilymaz, N Demas and G Chen: Wear, 2012, vol. 278-279, pp. 62-70.10.1016/j.wear.2012.01.007 ↗
44. J.W. Hutchinson and Z. Suo: Adv. Appl. Mech., 1992, vol. 29, pp. 63-191.10.1016/S0065-2156(08)70164-9 ↗
45. F. Erdogan and G. Sih: J. Basic Eng., 1963, vol. 85, pp. 519-525.10.1115/1.3656897 ↗
46. B. Cotterell: Int. J. Frac. Mech., 1966, vol. 2, pp. 526-533.10.1007/BF00193691 ↗
47. A.G. Evans, M.D. Dory and M.S. Hu: J. Mater. Res., 1988, vol. 3, pp. 1043-1049.10.1557/JMR.1988.1043 ↗