Fatigue Behaviors of Materials Processed by Planar Twist Extrusion
Source abstract
Abstract
Since the last decade, the fabrication of ultrafine grain and nanostructure metals and alloys has attracted much attention in the field of materials engineering. The present study aimed at experimentally investigating the fatigue properties that are of great importance in dynamic structures before and after the planar twist extrusion process for both commercially pure copper and 6061 aluminum alloy. The results indicated that the yield strength, tensile strength, hardness, and fatigue endurance of copper increased by about 398, 122, 198, and 183 pct, respectively, while they improved by about 429, 212, 227, and 148 pct, respectively, in aluminum alloy as compared to the initial conditions. The stress-strain curves displayed sizable reduction of strain hardening. Furthermore, grain-size correction factors based on the empirical results were introduced to include the effect of the grain-size effect on both low and high-cycle fatigue strengths of the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. S. Fintová and L. Kunz: J. Mech. Behav. Biomed. Mater., 2015, vol. 42, pp. 219–28.10.1016/j.jmbbm.2014.11.019 ↗
2. K. Miková, S. Bagherifard, O. Bokuvka, M. Guagliano, and L. Trško: Int. J. Fatigue, 2013, vol. 55, pp. 33–42.10.1016/j.ijfatigue.2013.04.021 ↗
3. S. Bagherifard, I. Fernandez-Pariente, R. Ghelichi, and M. Guagliano: Mater. Des., 2013, vol. 45, pp. 497–503.10.1016/j.matdes.2012.09.025 ↗
4. R.Z. Valiev and T.G. Langdon: Progr. Mater. Sci., 2006, vol. 51, pp. 881–981.
5. K. Edalati and Z. Horita: Mater. Sci. Eng. A, 2016, vol. 652, pp. 325–52.10.1016/j.msea.2015.11.074 ↗
6. B. Cherukuri, T.S. Nedkova, and R. Srinivasan: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 394–97.10.1016/j.msea.2005.08.024 ↗
7. A Azushima, R Kopp, A Korhonen, DY Yang, F Micari, GD Lahoti, P Groche, J Yanagimoto, N Tsuji, A Rosochowski, A Yanagida (2008) CIRP Ann.—Manuf. Technol. 57:716–35.10.1016/j.cirp.2008.09.005 ↗
8. R.Z. Valiev and T.G. Langdon: Metall. Mater. Trans. A, 2011, vol. 42, pp. 2942–51.10.1007/s11661-010-0556-0 ↗
9. A. Sajadi, M. Ebrahimi, and F. Djavanroodi: Mater. Sci. Eng. A, 2012, vol. 552, pp. 97–103.10.1016/j.msea.2012.04.121 ↗
10. M. Ebrahimi, S. Attarilar, F. Djavanroodi, C. Gode, and H.S. Kim: Mater. Des., 2014, vol. 63, pp. 531–37.10.1016/j.matdes.2014.06.043 ↗
11. A.S.J. Al-Zubaydi, A.P. Zhilyaev, S.C. Wang, and P.A.S. Reed: Mater. Sci. Eng. A, 2015, vol. 637, pp. 1–11.10.1016/j.msea.2015.04.004 ↗
12. Y. Estrin, M. Janecek, G.I. Raab, R.Z. Valiev, and A. Zi: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1906–09.10.1007/s11661-007-9120-y ↗
13. M. Society: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3035–45.
14. F. Djavanroodi and M. Ebrahimi: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1230–35.10.1016/j.msea.2009.09.052 ↗
15. S.X. Ding, C.P. Chang, and P.W. Kao: Metall. Mater. Trans. A, 2009, vol. 40, pp. 415–25.10.1007/s11661-008-9747-3 ↗
16. B. Hwang, H.A.N.S. Lee, Y.G.O.N. Kim, S. Lee, B.D.O.O. Ahn, D.H. Shin, and C.G.I.L. Lee: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 389–97.10.1007/s11661-005-0310-1 ↗
17. H. Matsunoshita, K. Edalati, M. Furui, and Z. Horita: Mater. Sci. Eng. A, 2015, vol. 640, pp. 443–48.10.1016/j.msea.2015.05.103 ↗
18. K. Verstraete, A.L. Helbert, F. Brisset, A. Benoit, P. Paillard, and T. Baudin: Mater. Sci. Eng. A, 2015, vol. 640, pp. 235–42.10.1016/j.msea.2015.05.106 ↗
19. G. Faraji, A. Babaei, M.M. Mashhadi, and K. Abrinia: Mater. Lett., 2012, vol. 77, pp. 82–85.10.1016/j.matlet.2012.03.007 ↗
20. M. Shahbaz, N. Pardis, R. Ebrahimi, and B. Talebanpour: Mater. Sci. Eng. A, 2011, vol. 530, pp. 469–72.10.1016/j.msea.2011.09.114 ↗
21. M. Shamsborhan and M. Ebrahimi: J. Alloys Compd., 2016, vol. 682, pp. 552–56.10.1016/j.jallcom.2016.05.012 ↗
22. S.A.A. Akbari Mousavi and S.R. Bahadori: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1242–46.10.1016/j.msea.2010.10.007 ↗
23. C. Wang, F. Li, Q. Li, and L. Wang: Mater. Sci. Eng. A, 2012, vol. 548, pp. 19–26.10.1016/j.msea.2012.03.055 ↗
24. M. Ebrahimi, H. Gholipour, and F. Djavanroodi: Mater. Sci. Eng. A, 2015, vol. 650, pp. 1–7.10.1016/j.msea.2015.10.014 ↗
25. H.-K. Kim, M.-I. Choi, C.-S. Chung, and D.H. Shin: Mater. Sci. Eng. A, 2003, vol. 340, pp. 243–50.10.1016/S0921-5093(02)00178-8 ↗
26. H. Kim, Y. Lee, and C. Chung: 2005, vol. 52, pp. 473–77.
27. A. Vinogradov, A. Washikita, K. Kitagawa, and V.I. Kopylov: Mater. Sci. Eng. A, 2003, vol. 349, pp. 318–26.10.1016/S0921-5093(02)00813-4 ↗
28. Liu S.M., Wang Z.G. (2003) 48:1421–26.10.1016/S1359-6462(03)00107-6 ↗
29. O. Kulyasova, R. Islamgaliev, B. Mingler, and M. Zehetbauer: Mater. Sci. Eng. A, 2009, vol. 503, pp. 176–80.10.1016/j.msea.2008.03.057 ↗
30. P. Cavaliere and M. Cabibbo: Mater. Charact., 2008, vol. 59, pp. 197–203.10.1016/j.matchar.2006.12.013 ↗
31. S.Z. Han, M. Goto, C. Lim, C.J. Kim, and S. Kim: J. Alloys Compd., 2007, vols. 434–435, pp. 304–16.10.1016/j.jallcom.2006.08.179 ↗
32. A. Vinogradov, S. Nagasaki, V. Patlan, K. Kitagawa, and M. Kawazoe: Nanostr. Mater., 1999, vol. 11, pp. 925–34.10.1016/S0965-9773(99)00392-X ↗
33. R.B. Figueiredo, E.R. de C. Barbosa, X. Zhao, X. Yang, X. Liu, P.R. Cetlin, and T.G. Langdon: Mater. Sci. Eng. A, 2014, vol. 619, pp. 312–18.10.1016/j.msea.2014.09.099 ↗
34. F. Akbaripanah, F. Fereshteh-Saniee, R. Mahmudi, and H.K. Kim: Mater. Sci. Eng. A, 2013, vol. 565, pp. 308–16.10.1016/j.msea.2012.12.062 ↗
35. C. Xu, Q. Wang, M. Zheng, J. Li, M. Huang, Q. Jia, J. Zhu, L. Kunz, and M. Buksa: Mater. Sci. Eng. A, 2008, vol. 475, pp. 249–56.10.1016/j.msea.2007.04.074 ↗
36. S. Fintov and L. Kunz: J. Mech. Behav. Biomed. Mater., 2015, vol. 42, pp. 219–28.10.1016/j.jmbbm.2014.11.019 ↗
37. E.C. Moreno-Valle, M.A. Monclus, J.M. Molina-Aldareguia, N. Enikeev, and I. Sabirov: Metall. Mater. Trans. A, 2013, vol. 44, pp. 2399–408.10.1007/s11661-012-1576-8 ↗
38. N. Pardis and R. Ebrahimi: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6153–56.10.1016/j.msea.2010.06.028 ↗
39. E. Bagherpour, R. Ebrahimi, and F. Qods: Mater. Des., 2015, vol. 83, pp. 368–76.10.1016/j.matdes.2015.06.023 ↗
40. E. Bagherpour, F. Qods, R. Ebrahimi, and H. Miyamoto: Mater. Sci. Eng. A, 2016, vol. 666, pp. 324–38.10.1016/j.msea.2016.04.080 ↗
41. N. Pardis and R. Ebrahimi: Mater. Sci. Eng. A, 2009, vol. 527, pp. 355–60.10.1016/j.msea.2009.08.051 ↗
42. H. Alihosseini, M. Asle Zaeem, and K. Dehghani: Mater. Lett., 2012, vol. 68, pp. 204–08.10.1016/j.matlet.2011.10.037 ↗
43. I. Balasundar, K.R. Ravi, and T. Raghu: Mater. Sci. Eng. A, 2013, vol. 583, pp. 114–22.10.1016/j.msea.2013.06.029 ↗
44. B.Q. Han, E.J. Lavernia, and F.A. Mohamed: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 71–83.10.1007/s11661-003-0209-7 ↗
45. C. Kammerhofer, A. Hohenwarter, S. Scheriau, H.P. Brantner, and R. Pippan: Mater. Sci. Eng. A, 2013, vol. 585, pp. 190–96.10.1016/j.msea.2013.07.032 ↗
46. Y. Xiong, T. He, Z. Guo, H. He, F. Ren, and A.A. Volinsky: Mater. Sci. Eng. A, 2013, vol. 563, pp. 163–67.10.1016/j.msea.2012.11.068 ↗
47. M. Naseri, A. Hassani, and M. Tajally: Ceram. Int., 2015, vol. 41, pp. 3952–60.10.1016/j.ceramint.2014.11.079 ↗
48. A. Fata, G. Faraji, M.M. Mashhadi, and V. Tavakkoli: Mater. Sci. Eng. A, 2016, vol. 674, pp. 9–17.10.1016/j.msea.2016.07.117 ↗
49. M. Aydin: J. Mater. Process. Technol., 2012, vol. 212, pp. 1780–89.10.1016/j.jmatprotec.2012.03.027 ↗
50. F. Djavanroodi, M. Ebrahimi, B. Rajabifar, and S. Akramizadeh: Mater. Sci. Eng. A, 2010, vol. 528, pp. 745–50.10.1016/j.msea.2010.09.080 ↗
51. A.I. Dekhtyar, B.N. Mordyuk, D.G. Savvakin, V.I. Bondarchuk, I. V. Moiseeva, and N.I. Khripta: Mater. Sci. Eng. A, 2015, vol. 641, pp. 348–59.10.1016/j.msea.2015.06.072 ↗
52. M. Goto, S.Z. Han, T. Yamamoto, J. Kitamura, J.H. Ahn, T. Yakushiji, S.S. Kim, and J. Lee: Int. J. Fatigue, 2015, vol. 92, pp. 577–87.10.1016/j.ijfatigue.2016.02.006 ↗
53. M.M. Abramova, N.A. Enikeev, R.Z. Valiev, A. Etienne, B. Radiguet, Y. Ivanisenko, and X. Sauvage: Mater. Lett., 2014, vol. 136, pp. 349–52.10.1016/j.matlet.2014.07.188 ↗
54. M. Reihanian, R. Ebrahimi, N. Tsuji, and M.M. Moshksar: Mater. Sci. Eng. A, 2008, vol. 473, pp. 189–94.10.1016/j.msea.2007.04.075 ↗
55. N. Gao, M.J. Starink, M. Furukawa, Z. Horita, C. Xu, and T.G. Langdon: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 303–07.10.1016/j.msea.2005.08.075 ↗
56. P. Hru, J. Cí, and M. Jane: Acta Mater., 2016, vol. 105, pp. 258–72.10.1016/j.actamat.2015.12.039 ↗
57. W. Blum, J. Kratochvi, and R. Sedla: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 319–27.
58. P. Luo, D.T. Mcdonald, W. Xu, S. Palanisamy, M.S. Dargusch, and K. Xia: Scripta Mater., 2012, vol. 66, pp. 785–88.10.1016/j.scriptamat.2012.02.008 ↗
59. M. Ebrahimi and C. Gode: Progr. Nat. Sci. Mater. Int., 2017, vol. 27, pp. 244–50.10.1016/j.pnsc.2017.03.002 ↗
60. M. Goto, N. Teshima, S.Z. Han, K. Euh, T. Yakushiji, S.S. Kim, and J. Lee: Eng. Fract. Mech., 2013, vol. 110, pp. 218–32.10.1016/j.engfracmech.2013.07.018 ↗
61. M.H. Farshidi, M. Kazeminezhad, and H. Miyamoto: Mater. Sci. Eng. A, 2014, vol. 615, pp. 139–47.10.1016/j.msea.2014.07.061 ↗
62. N. Pardis, C. Chen, R. Ebrahimi, L.S. Toth, C.F. Gu, B. Beausir, and L. Kommel: Mater. Sci. Eng. A, 2015, vol. 628, pp. 423–32.10.1016/j.msea.2015.01.003 ↗
63. M. Ebrahimi and F. Djavanroodi: Progr. Nat. Sci. Mater. Int., 2014, vol. 24, pp. 68–74.10.1016/j.pnsc.2014.01.013 ↗